Posts made by dedo

Ok, I started to conduct some research for carrier flight decks. First of all I need some drawings and plans of flight decks, then I 'm going to modify the flight decks. I will open a new thread to let you know about the status of the project.

One issue I didn’t mention yet:

By designing the flight deck decals, it is important to decide which basic carrier modell you take; for example: my basic carrier modell (bcm) is the Akagi (AA1941), not the Shinano (all other newer AA sets). I adjusted the decals I made to the bcm of the Akagi. If you want decals for the bcm of the Shinano I have to convert the decals a little bit.

Did you print them onto Labels so they would stick?

No, I printed them on a clear decal film, they are decals. It is possible to print them on a sticker film, too, I’ve tried this once, but to apply the sticker on a flight deck is tricky and sometimes it is affilliated with some frustration (e.g. air bubbles, only one try). I recommend a decal.

You consider selling your landing deck decals?  I bet they’d be popular…

I never thought about selling, I don’t want to earn any money with the decals. If there were only a few people in the community interested in the decals I would ship the decals to them just for shipping and material costs (all in all ~ € 1,50, decals will be send in a letter from Germany to the US).

Just the file could work though… I’ve used thin paper glued down in some instances and it looks good.  Uhh… yeah, I’d like to get a hold of that file as well…

would you mind emailing me that file?

No problem with the file, I could mail you by PM. If you want to make DIY decals, here is the advice:
1. you need some decal film, order for example at www.bare-metal.com (american company, as far as I know). There are films for inkjet and laserjet printers. You need “clear” decal films (there are also “white” films, but you don’t need those)
2. order a fine spray for coating the decals, I took “TopCoat gloss” from Mr.Hobby. Coating will protect the image from smudging and it will strengthen the film.
3. additionally, you need a decalcote/softener, (e.g. “Mr.MarkSofter” from Mr.Hobby), some white colour, and a clear acryl varnish.
4. print out a sample of the grafic on plain white paper
5. adjust the grafic in size if required
6. proceed with printing on the decal film
7. cut of the printed decals form the the sheet accurately
8. apply the topcoat (tricky, not too much spray, otherwise there will be an ink bleeding and you can start over again with a new decal….). It’s is better to give another thin coat after the first one dried (20 min).
9. paint the flight deck in white colour, let the colour dry (20 min)
10. moisten the decal in water, moisten the flight deck with water
11. apply the decal to the flight deck, use a tooth stick or something like this for adjusting the decal to the flightdeck. Make sure, that there is sufficient moisture on the flightdeck when adjusting the decal.
12. When the decal is fixed on the flight deck take off excess liquid with a cotton swab carefully.
13. apply the decalcote/softener, let the softener dry (10 min)
14. apply with a brush a clear acryl varnish, let the acryl varnish dry (10 min).
15. Ready!

Right now I’m thinking about developing a complete set of flight decks for all relevant carriers in the game.

@Johnson73:

How did you do the flight deck decals?  Did you paint any of the flight deck, or is it all decal?

Concerning the japanese carriers the whole flightdeck is a decal. Internet research made it possible: I found some japanese flightdeck drawings in *.jpg format. I modified them pixel by pixel with ms-paint and scaled them to the sizes of the japanese oob-carrier. Then I painted the flightdeck of the unit in white (for a better luminance of the decal). After drying of the colour I applied the decals on the flightdeck, soften the decals and varnished them with a clear acrylic paint.

decals - I dabbled with that once

There is no witchcraft, main issue is to fix the decals appropriately - to much fixing and the decals melt away on the foil, not enough fixing and they melt away in the water. I needed some tries to obtain satisfying results.

This is art. I’m really astonished, how many details can be applied to a 2-cm unit, they look absolutely realistic.

How much time do you need for one tank?

some other units…

What kind of paints are you using and where did you get your decals?

I used acrylic paints (Gunze) and enamel paints (Revell).
Decals I made DIY. I ordered some transparent and white decal film from www.bare-metal.com, designed (paint, word) and printed (inkjet) roundels and some other highly detailed stuff important for the units (e.g. some flightdecks).

Problems with decals: the transparent decal film is very translucent, so you need to apply a white background on the unit to let them shine brightly. I painted white dots with a felt tip paint marker (edding 751) as for roundel backgrounds. You may use the white decal film also, but then you have to cut off the decals exactly, what is difficult in the case of the german balkenkreuze, for example.

DIY flight deck decals…

Scanning the base and complex markers worked out well

Could you please upload the scans? I like to modify an electronic map by inserting the icons (…always bothered by the card board markers)

I hope, this works….

http://s1242.beta.photobucket.com/user/Metabaron/profile/

click on “view library” at the bottom (or “show library” on the left side), the liberary it is devided into different albums for the belligerent parties.

More than 100 photos.

The red fez offends me.

If you wear shirt, fez an flags together you could make it big here in Germany, especially nowerdays in the area Cologne - no one would feel offended.

“Good work, Commander!” (Darth Vader) and a lot of efforts worth the outcome! Personally, I think a printed map in one piece would look a little bit nicer than the 4-parts OOB map but this is definitely an extra amount of money for things one have got already.

Any good web of roundels?

try this link;

http://commons.wikimedia.org/wiki/Roundel?uselang=de

DESSERT FORCES

That’s what my wife is calling me…after finishing the desserts off…

Great work, you put your heart and soul in it! Just one small point you could improve: in the pictures table5 and table6 there are dividers with visible cut edges (dividers between coins and dices). If you paint them, you will have another surface coverage as for the other parts of the table and with the utmost probability this will annoy you. My suggestion is to saw them in a way, that the grain is visible on top of the divider.

Great work! Especially the paratroopers!

MDF (Medium density board), 8mm

Is this stable enough? I build my travel table of MDF, 12 and 16 mmm, and it’s rather “flexible”. However, in any case, I need a desk to put the board on.

Left to be figured out is how to cover the “hole” that will be in one end when its folded in half

Don’t fit the sideboard parts into the “hole”? I can’t figure it out from the foto, weather the sideboard consists of one or more parts.

Nice table! I’m thinking about to make a new one for me and my friends and your design looks very interesting. What kind of material did you use? How did you connect the sideboards to the table (or are they connected? I can’t see it on the picture….)