AARHE: Map files

My rationale for altering territory PF values was to attempt to make them more ‘relatively’ accurate. Part of the problem is that A&A is a simplified simulation. A simplified map and simplified PF values.
My proposed changes barely alter the map (I include a new South India Territory). Where I attempted an alteration was to spread PF values into ‘Siberian Territories’ , to better reflect Canadian PF values and to do the same with ‘Indonesian’ Territories.
Kreuzfeldt, I am not or was not basing my alterations on ‘oil’ or ‘resources’ only. A&A, in all it’s various incarnations, is a simplified simulation.
As to your numbered points;

The map given is the map that must be worked with. I had no thought of population as opposed to resources. My alterations to PFs are my opinion of the relative values of the Territories affected. There is an emphasis on Canada to more accurately, imho, reflect it’s component parts. I am a Canadian so I wish to see a better relative accuracy there (here). The maps and the PF resource values may not be entirely accurate for the original territories (or even for my suggestions). Again, A&A is a very simplified simulation. Compromises have to be made. It is a fact that capital Territories, especially, in Europe (& for Japan territory) HAD the overwhelming or virtually all the concentrated industry (& resources). This explains where the Factories are placed. I see no problem, therefore, that PF values for France, West Germany or Russia are increased somewhat. You think the UK (England territory) should be worth considerably more than ‘France’ (Paris) or West Germany (the Ruhr)? Your choice, not mine.
4)My intent was to give ‘relative’ value to as many ‘spaces’ (territories) as possible. This is why I added value to some of the ‘Siberian’ territories in the USSR. This is why I spread the Indonesian values out to a few more spaces. The idea of ‘oil’ is subsumed into the game. It is not necessary to make Rumania so valuable (6 pts) as you suggest. I could be incorrect about the relative value I give to the Urals & NovoSibirsk, however, I observe that the ‘Urals’ space  reflects the ‘northern (arctic) Urals’ (hardly the space for industry). NovoSibirsk space could have a higher value. Note, Kreuzfeldt, the actual names used in the USSR & the fact many of these ‘spaces’ would have had a value greater than 0. Hence, I place a number of ‘value territories’ in the spaces that reflect ‘Siberia’ or parts thereof). So, I am trying (tried) to reflect an importance for Siberia (more, in fact, than the original map).
I did not alter the PFs (total points) of any ‘Nation’ from the original game. I simply attempt to offer a more accurate ‘relative’ PF value for certain Territories. I created a few new Territories but only where logical and where able (using the original map given).
Some players may dispute my new ‘relative’ PF Territory values. I am sure some values might be altered, however, not by much, imho.
As to A&A maps? All I will say is they have improved from the original but they still present ‘problems’.
Again, A&A is a simple simulation and ‘compromises’ are (& will) be made. The above Global 1940 Map alterations are my suggestions to making this map a little bit ‘better’.

I played another game with India at 5, but I played against myself instead of the AI (first time doing that!).

Russia got absolutely diced in the heavy Ukraine strafe, and so West Russia was abandoned R2 and with no fighter support (Iceland gone G1, no other good routes) Germany rolled over them on turn G5.

Once the fighter route was gone I went heavy tanks in India, hoping to swing out against the Japanese and provide defence for Moscow.  I did have 8 UK tanks about to rush in to Moscow for defence (on UK6), but that would have exposed India on J6 AND Japanese tanks were closing in on Moscow as well, so it would have been a 1 or 2 turn delay at most.  Japan had the luxury of building a factory in Manchuria for north route tanks and just stacking Yunnan with art and inf (with their fleet in the adjacent SZ) and deadzone Burma, so the UK troop buildup in India couldn’t really pivot out of India as much as I thought.  Any foray out of India, and the 5 IPC factory would be gone, so the two armies stayed in the gravitational pull of one another.

I’ve never really done a KJF, but I think that might work a lot better with 5 IPC India.  I might read some KJF strategies and try it out.  So far, 5 IPC India is a failure, haha.

For aesthetic reasons, to maintain the integrity of the AA50 map. Swiss have a distinct neutral color and i don’t want it mixed into the other nations.

ok ill make a third version with the changes you asked for. Tonight.

unless our German player is being too cautious, France has been very difficult.  At 15 IPC they generate 7 inf in their capital per turn.  I think Germany has too much along the Russian front for the 1st couple turns when Russia has no threat.

We will need to change Germany’s tactic and see what happens.

Germany takes Poland and Norway on turn one
On turn two they take Holland and finish off Norway
On turn three they send all their air force, armor and built up stuff and Frenchies have no answer.

You can even send the Italians in the south to finish the job.

It DOES read one level of technology transferred between one SIDE per turn.

so if axis as a group obtain 4 tech slots, only one level can pass from one nation to another that turn.

Soviets don’t share or receive secrets.

thats just fine.

oh I see
thats fine
the current tech list welcomes scrutiny

check out the draft detailing the techs if you haven’t already

the heavy artillery gives you a new unit at 5 IPC 3/2, it has ability to fight in adjacent territory with -1 modifier, provided itself is not being attacked