AARHE: Map files

Fair enough! And thanks very much for the writeup. If anyone tries this again, consider adding:

2 German subs in SZ 10 (Greenland)
2 German subs in SZ 12 (west of Morocco)
1 Japanese carrier with 1 Japanese fighter in SZ 62 (east of Tokyo)

I played another game with India at 5, but I played against myself instead of the AI (first time doing that!).

Russia got absolutely diced in the heavy Ukraine strafe, and so West Russia was abandoned R2 and with no fighter support (Iceland gone G1, no other good routes) Germany rolled over them on turn G5.

Once the fighter route was gone I went heavy tanks in India, hoping to swing out against the Japanese and provide defence for Moscow.  I did have 8 UK tanks about to rush in to Moscow for defence (on UK6), but that would have exposed India on J6 AND Japanese tanks were closing in on Moscow as well, so it would have been a 1 or 2 turn delay at most.  Japan had the luxury of building a factory in Manchuria for north route tanks and just stacking Yunnan with art and inf (with their fleet in the adjacent SZ) and deadzone Burma, so the UK troop buildup in India couldn’t really pivot out of India as much as I thought.  Any foray out of India, and the 5 IPC factory would be gone, so the two armies stayed in the gravitational pull of one another.

I’ve never really done a KJF, but I think that might work a lot better with 5 IPC India.  I might read some KJF strategies and try it out.  So far, 5 IPC India is a failure, haha.

OK here you go:

USA:
http://www.mediafire.com/?yc45jzgdk22

Russia:
http://www.mediafire.com/?m9wekdzzzj2

Japan:
http://www.mediafire.com/?yosk8d6aiui

UK:
http://www.mediafire.com/?w9tnjgl1vqs

Italy:
http://www.mediafire.com/?m7k0sjdiphr

Germany:
http://www.mediafire.com/?lz52uo2mddc

AA scale for destroyers is approximately 1/2400, 1" equals 200 feet.  On that scale an Iowa-class battleship would be almost 4.5" long, rather than the 2.25" it actually is.  Scale for the battleships runs from about 1/3600 for the UK Royal Soveriegn to about 1/4700 for the Iowa.  The Yamato is about 1/4200 and the Bismarck is about 1/4300.  The scale for the aircraft carriers ranges from the Wasp at about 1/3500 to the Shinano at about 1/4200, as all of the carriers are the same length, 2.5".  The two cruisers are about 1/3700 scale.  The subs range from the German Type VIIC at about 1/1400 to the Japanese I-15 class at about 1/2400.

If you buy 1/3000 scale ships, which is 1" equals 250 feet, an Iowa will run about 3.5 inches, considerably larger than the destroyers in the game.

Quote from: oldsalty on September 01, 2008, 07:17:52 am
That appears to make sense from the few pieces I’ve ordered to compare size and quality.

What is the difference between 1/2400 and 1/3000 in inches?  Looks like the 1/2400 is an USA scale (based in ft/in).  Is the 1/3000 the European scale based in meters?

Side by side, would a 1/2400 piece actually be 20% smaller than a 1/3000 scale piece?

A 1/3000 scale ship will actually be about 20% smaller than a 1/2400 scale ship.

I will post the scales for the aircraft once I finish measuring them.

Thats a complete waste of time…. The only scales for small inexpensive metal ships THAT IS ACTUALLY CURRENTLY IN PRODUCTION IS 1/2400 AND 1/3000…SO THE ONLY REALISTIC OPTION IS TO BUY 1/2400 SCALE WHICH ARE OFFERED FROM NAVWAR AND SKYTREX, WHILE 1/3000 SCALE IS TOO LARGE.

The scales are the same regardless representing objects 1/3000 or 1/2400 times smaller than original. Its not a Metric vs. English system.

Axis and allies uses 1/700 scale planes and 1/285 armor and 15 MM infantry ( or to convert you use HO 1/87 plastic or 1/72). These are the scales your looking for and i already posted the order sheet in another thread.

It DOES read one level of technology transferred between one SIDE per turn.

so if axis as a group obtain 4 tech slots, only one level can pass from one nation to another that turn.

Soviets don’t share or receive secrets.

ok thats fine then.

oh ok.

ok