AARHE: Map files

I was just trying to visual what the coolest possible legacy product for me would be.

A 3 or 4 section split map, so that its easy to move or store a set board. A rigid material that doesn’t get wet or bend, or worn from folding (since its sectional.) Something printed on metal would be coolest, because that would allow for Cyanite style magnetic sculpts and also a way to stack the sectional board, using pylons or columns like an inch or so high, you could stack a set board on top of itself with the sculpts in place for easier storage on top of a shelf or corner of a table (since A&A is such a long game that would be particularly rad).

A double sided map would be sweetest, with the obverse serving as the main base map, and the reverse something more customizable. So maybe a political historical theme for the front map (all the pretty national colors, with the labeling of things like VCs or starting territory control with little roundels etc being printed directly on it.) The reverse side could be a more stripped down build-it-yourself topographical map, showing the basic territory and sz divisions, but using movable control markers to indicate things like VCs and starting territories control. On upside down, it could then service multiple scenarios or different start dates.

Magnetic sculpts, with chips, baseplates and risers for easy grouping and stacking.

WW2 nation themed unit trays, dice, and dice tower.

The underside of the box lid itself, could serve as a large battle board field for multiple encounters per turn. Something that shows the base attack/defense power (“hits at”) in Rows 1-4, and shows moves remaining on the attacker side (“moves left”) in columns to the far right or left of each row 1-5. That way all the critical gameplay information is preserved when moving sculpts from the map to the battle box and back again. Movable battle markers could be used to indicate which square on the battleboard field corresponds to which territory or sz on the map. Since there is a lot of room on the box lid, you could also have a field/marker that is used to expand a territory or sea zone that is becoming overcrowded. Similar to the blow up boxes on the Classic map, but more adaptive.

The inside of the box base could serve (as it often already does), for rolling the dice and housing the sculpt trays, but with a tower this would make it easier to save space.

Using a sectional map rather than a folding map, with pylons everything could be stacked on top of itself, even for a set game. And then moved around easily from spot to spot. Basically a longer box, with a narrower attack profile hehe

The 1942 game map in print is 40″ x 26″ but its comprised of two folding pieces of cardboard which is harder to move around without a backing and takes up a lot of space when set. Global and AA50 also use folding maps. A rigid sectional map that was more like 12x24 in 4 panels would be larger when playing but easier to transport when set, and a lot smaller when stacked so you could have something a little closer in total size/space to the game box itself. Just a few inches taller. With magnets stuff wouldn’t shift around, so it’d be easier to leave out without dominating the room.

Then for the manual something like a gamemaster’s guide, or a players handbook or DMG in D&D but for Axis and Allies. Like with a layout of the standard rules for the scenario or campaign that comes in the box, but also with a section at the end on the history of the game, and ideas for how to customize or create new scenarios, paint sculpts, add to the game and whathaveyou.

Something like that would be platinum plus. Take all my loot hehe

Thanks! I mostly agree with your comment about per-dice research efficiency; the only reason I didn’t include additional penalties for triple-stacking your scientists is for the sake of simplicity. If you want to play with a -3 penalty, or (even better) a -4 penalty that rounds up to a -3 penalty if you roll three 1’s, then go right ahead!

Giving each Axis nation 3 tokens and each Allied nation 2 tokens tends to give the Axis an early edge in research (they will manage their first couple of breakthroughs earlier than the Allies will), but then the Allies will start to catch up and then overtake the Axis later in the war, because the Axis scientists (on average) will be more “crowded” and will take more stacking penalties.

You could bump Radar to 14 pts. or even to 16 pts. if you really want to, but there are limited opportunities to make full use of the potential synergy. E.g., suppose Germany is using a “Dark Skies” approach to ward off Allied fleets with its enormous Nazi bomber squadrons. Britain might want both Radar and Anti-Aircraft Cruisers to help protect its fleet. Russia, on the other hand, only needs Radar – they’re not going to build any cruisers. Similarly, Russia doesn’t have much use for Jet Fighters, since if it’s suffering from a strategic bombing campaign, it won’t be able to afford much in the way of extra fighters. There’s also the concern that “Heavy Bombers” has always been an overpowered technology in every version of Axis & Allies that had tech. I tried to err in the opposite direction by making the anti-aircraft techs roughly as powerful as the aircraft-enhancement techs!

There is an “Improved Artillery” tech in some of the OOB versions of Axis & Allies, and I’ve never seen anyone buy it, except maybe Russia, who really does have to count every dollar and might not be able to afford enough artillery to fully power its infantry stacks. It is really challenging to fully exploit the advantage of 2:1 artillery support is that it’s really hard to maintain the desired ratio. E.g. if I have a stack of 10 infantry and 5 artillery, then after one round of combat, I probably have something like 2 infantry and 5 artillery, and the extra artillery support becomes moot. It stays moot on defense, too, when those artillery try to hold the ground they just captured. But if I have a stack of 20 infantry and 5 artillery instead, then my army is hugely inefficient – even with 2:1 artillery support, I’m only generating 40 pips of punch on 25 units, so I’m going to give you multiple rounds of combat in which to score hits and wear down my army.

You get the same problem in reverse if you want to only boost the artillery’s native attack power. With a stack of, e.g., 8 infantry and 3 artillery, the tech would only give you +3 pips of punch – it’s just not very exciting. You could try attacking with a stack of all artillery, e.g., 10 artillery for $40, but that just seems weird and un-thematic.

Anyway, let me know if you try out the rules, with or without some modifications! I’d be curious to see how they work in live play. I’m defending my rules so you have the benefit of my opinions, but they’re just opinions, and ultimately the house rules are there for everyone to enjoy however they like…if you think you’ll have more fun tweaking the costs or nerfing a couple of the techs, then go with what seems fun! :-)

Combine Venezuela/Colombia/Ecuador, Chile/Bolivia/Peru, and Argentina/Paraguay/Uruguay together. No need to change IPC values.

From a playability standpoint it makes no sense to have 9 little countries across the continent.

I play it like this and things can get interesting.

Ever tried this?

thats just fine.

Note: This is not a complete list of all the modifications we’ve made in Phase 1. I will try to continually add to this as new ideas are posted. Please post any suggestions to the following rules at the Main Topic Board http://www.axisandallies.org/forums/index.php?topic=6470.0 or directly at one of the following related AARHE Phase 1 specific topics:

National Units http://www.axisandallies.org/forums/index.php?topic=6469.0
Unit Purchases and Mobilization http://www.axisandallies.org/forums/index.php?topic=6471.0
Income http://www.axisandallies.org/forums/index.php?topic=6473.0

Victory Cities

Every nation starts with 7 victory cities (VCs), each worth a certain number of victory city points (VCPs). Of these 7 VCs, 1 is designated as a capital (worth 5 VCPs), 1 other is designated as a major VC (worth 3 VCPs), 2 others are designated as moderate VCs (worth 2 VCPs each), and the last 3 are designated as a minor VCs (worth 1 VCP each).

The following is the list of VCs, the corresponding VCP value for that VC and the territory in which each is located. The VCs are organized by nation.

Russia:
Moscow (5)–Russia
Stalingrad (3)–Caucasus
Leningrad (2)–Karelia
Novosibirsk (2)–Novosibirsk
Archangel (1)–Archangel
Almaty (1)–Kazakh
Vladivostok (1)–Buryatia

Germany:
Berlin (5)–Germany
Rome (3)–S. Europe
Paris (2)–W. Europe
Kiev (2)–Ukraine
Warsaw (1)–E. Europe
Oslo (1)–Norway
Kursk (1)–W. Russia

UK:
London (5)–UK
Toronto (3)–E. Canada
Calcutta (2)–India
Sydney (2)–Australia
Cairo (1)—Anglo-Egypt
Damascus (1)–Trans-Jordan
Cape Town (1)–South Africa

Japan:
Tokyo (5)—Japan
Changchun (3)–Manchuria
Shanghai (2)–Kwangtung
Singapore (2)–FIC
Manila (1)—Philippines
Guadalcanal (1)–Solomon Islands
Milne Bay (1)–New Guinea

US:
Washington (5)–E. US
Los Angeles (3)–W. US
Chicago (2)–C. US
Chongqing (2)–China
Ãœrümqi (1)–Sinkiang
Honolulu (1)–Hawaii
Sao Paulo (1)–Brazil

Infantry Unit Placement at VCs

ICs no longer build infantry units. Infantry units are assembled only in territories containing VCs. They are still purchased and mobilized at the same time as non-infantry units. In order to purchase and place any infantry in a VC, that VC must have been in your control at the start of your turn (placing an infantry unit in a VC can be considered the same as placing the infantry in the territory containing that VC).

For each of the 7 VCs that are originally owned by each nation, the maximum number of infantry that may be purchased and placed at the VC per turn is equal to the corresponding value of VCPs except for the following nation-specific exceptions:

Exception for the nations of Russia, Germany and Japan: If the VC is not connected to the capital VC thorugh a continuous line of friendly territories (not including SZs or neutral territories), then the maximum infantry placement is 1 less than the corresponding VCP value.

Exception for the Western Allies (UK and US): The maximum infantry placement for the capital VC is 3.

For each captured VC, the infantry placement limit is half of the VCP value for that captured VC (rounded down). This means that 0 infantry may be purchased and placed at a captured minor VC, 1 infantry at a captured moderate or major VC, and 2 infantry at a captured capital VC.

If any territory containing a VC is attacked before the defender’s first turn, then the defender of that VC gets to immediately purchase any number of infantry not exceeding more than the respective maximums outlined above and place them at that VC. These infantry units are purchased and placed just before the battle takes place. This rule applies only before the defender’s first turn. For example, it can apply to Russia attacking the Ukraine on Russia’s first turn but cannot apply to Germany attacking Karelia on Germany’s first turn (since Russia already had their first turn by the time Germany gets to move).Â

Non-Infantry Unit Placement at ICs

All non-infantry units are still built at ICs, however, unit placement limits at ICs have changed. The total IPC value of all non-infantry units placed per turn at any IC in a given territory may not exceed 4 times the IPC value of that territory. If a certain territory contains both a VC and an IC, then the infantry placement limits for the VC are treated independently from the non-infantry placement limits for the IC.

The cost of purchasing new ICs now depends on the territory in which the IC will be placed. Any player purchasing an IC must declare where the IC will be placed during the ‘Purchase Units’ phase. The IC is still placed during the ‘Mobilize New Units’ phase. To determine the cost of an IC in a given territory, multiply the number of IPCs for that territory by the number of VCPs within that territory and subtract this number from the base IC cost of 15. For example, an IC in India, FIC or Kwangtung now costs 15 - (3 IPCs)(2 VCPs) = 9 IPCs. An IC in W. Europe or C. US now costs only 15 – (6 IPCs)(2 VCPs) = 3 IPCs.  All ICs in territories not containing a VC cost 15 IPCs since 0 VCPs multiplied by any number of IPCs always results in a reduction of no IPCs from the base cost.

An IC can only be placed in a territory that was in your possession at the start of your turn. Furthermore, non-infantry units may only be placed at an IC that was there at the start of your turn. (This means once you take over a territory you have to wait 1 turn to build an IC and yet another turn to build units).

There are 2 types of ICs, initial ICs and purchased ICs. All territories containing either a capital or major VC automatically start with an iniitial IC (note that this just adds ICs to Manchuria and E. Canada). These inital ICs do not have to be represented by an IC piece on the game board since they cannot be moved or destroyed so they are always present in that territory.  All purchased ICs are represented by an IC piece and can be destroyed at the defender’s discretion when the attacker wins the battle over that territory.

Infantry Unit Costs

Infantry purchased to be placed in that nation’s capital cost 2 IPCs each.
Infantry purchased to be placed in all other territories of that nation’s color cost 3 IPCs each.
Infantry purchased to be placed in any captured territory cost 4 IPCs each.

Victory Conditions

Just like in the AAR box rules, players agree before the start of the game which set of victory conditions they will use; Total Victory, Major Victory or Minor Victory.

Total Victory: The winning team is the first to control every territory by the end of any US player’s turn.

Major Victory: The Axis win if they control 45 VCPs at the end of any US player’s turn. Likewise, the Allies win if they control 55 VCPs at the end of any US player’s turn.

Minor Victory: Both sides bid the number of turns that they want the game to last if they are the Axis. The team that bids the higher number of turns gets to play as the Axis. The game will automatically end after the US player’s turn on the turn number that won the bid. The team controlling the majority of the VCPs at that time wins the game. Note: This is unlike the major victory conditions or traditional victory city rules in that the winner is not the first side to reach a certain number of VCPs, but the side who maintains control of the majority of the VCPs by a certain turn number agreed upon by both sides. This is intended to better fix the game duration and to allow for quicker games if players are pressured by a time constraint.

Changes to Fighter Movement

Fighters that begin a certain turn on an aircraft carrier must also end that turn on an aircraft carrier, unless the aircraft carrier they started the turn on is destroyed during that turn. Note: Fighters do not have to start and end the turn on the same aircraft carrier. Fighters that start the turn in a territory can always end the turn on either an aircraft carrier or in a territory.

As before, the sum of the spaces moved during the combat and non-combat move phases cannot exceed the total movement for the fighter, however, now all fighters must count 1 extra move during the combat phase whenever they conduct a SZ battle.

Fighters that don’t move in the combat move phase of a certain turn may then move in the non-combat move phase of that turn the number of spaces up to their maximum movement, land in a friendly territory, and then again move up to their maximum movement to land in another friendly territory.

Turn Sequence

1. Purchase units
2. Collect income
3. Combat Move
4. Conduct Combat
5. Place newly purchased units
6. Noncombat move
7. Develop weapons

Optional Rules

Technology

Radar: Every surface naval unit and fighter unit now detects enemy subs on a roll of 4 or less instead of just a 2 or less. Also, every AA gun (max of 3 may fire per territory) may detect enemy air units flying over the territory on a roll of 4 or less.

Rockets: You may purchase rockets at a cost of 2 IPCs each. Any number of rockets may be fired from any number of your territories, provided that every one of those territories is contiguously connected to your capital. Once a rocket is fired from a territory, it may move up to 2 spaces to reach an enemy IC. The amount of damage done to the IC is equal to the larger of 2 dice rolls. Always roll for each rocket individually (i.e always roll only 2 dice at a time). You may rocket attack any number of enemy ICs, but the max damage done to any IC is equal to the territory’s IPC value.

Super Subs= All your subs attack/ defend and interdict enemy commerce at a roll of 3 or less. Also, subs may move 3 in the non-combat move phase (Note that subs still can’t move in both the combat and non-combat move phases in the same turn).

Long-range aircraft= All your fighters move 6. All your bombers that don’t move in the combat move phase get to move 8 in the non-combat move phase of that same turn. Whenever any of your bombers get shot down you have a choice of either (a) paying 10 IPCs and losing the ability of bombing the enemy in that same turn or (b) assigning the bomber as a casualty as usual.

Jet Fighters= Your AA gun units hit enemy air units on a 1 or 2. Your fighters are detected by enemy AA gun units at half the  number they would otherwise detect them (i.e. they detect your fighters only on a 1 without radar and on a 1 or 2 with radar). Also, your fighters defend at a 5.

Heavy Bombers= Enemy AA gun units detect your bombers at half the number that they would otherwise detect them (i.e. they detect your bombers only on a 1 without radar and on a 1 or 2 with radar). Also, take the larger of 2 rolls to determine damage during tactical and strategic bombing.

Rules regarding techs:

Tech Development Re-startup fee:
If on any turn a given nation doesn’t purchase any tech rolls, then on the next turn that the nation buys at least 1 tech roll, the nation must pay an additional 5 IPCs as a re-startup penalty.

Each tech roll still costs 5 IPCs. No nation may spend more than half their IPCs in the Technology Development phase of that turn.

The tech/s you are rolling to develop are declared before you roll. If you roll the same number as the ‘target number’ associated with the tech (see above) then you develop the tech. If you roll the number that equals 7 minus the target number, then you achieved a technology breakthrough. A technology breakthrough makes it much easier to develop that specific tech later in the game. For every technology breakthrough you achieve in a certain tech category, you get 1 additional free die roll in every turn that you buy at least 1 tech roll for that same tech. For example if you achieved 2 breakthroughs in Super Subs (i.e. you previously you rolled a 4 two separate times while attempting to get Super Subs) but still have not developed Super Subs, then on the next turn that you buy a tech roll for Super Subs you get to roll a total of 3 dice to develop that tech (1 for the purchased roll + 2 free die rolls for the 2 breakthroughs). Breakthroughs may only be used in the same tech category that you obtained them in.

Diplomatic Relations

(This section still under construction)

Russian Xenophobia

Neutral Aid

Joint Strike

Soviet-Japanese Non-Aggression Treaty

Lend-Lease

when you feel happy with the infantry placement rules just tell me and I’ll paste them into the main document

I hope you’ll repost in table format though  :wink:

Yeah I recall seeing some photos somewhere on the internet.

Someone traced a real map.
Painted it on a huge piece of wood. A0 or A-1.  :mrgreen: