AARHE: Map files

@barnee said in Submarine Movement and Customized Map:

@gen-manstein

someone should roof a game store with sheets of AnA lol

I probably have enough maps to do my ceiling in the fort.

I was referring to @Black_Elk 's project.

I am planning on printing one of IL’s maps. I’ll probably use his smaller AA50 and size it to 48x24.

@oldsalty:

OK.  Cost of the IC is not an issue.  Understand when IC costs vary between $5 - $15.    Does that also mean than if the factory is in China or Middle East, for example, in a Country with 3 IPC where they can produce 4 x 3 = $12 of units that they could build 1 ftr and 1 tank?

They may have the resources and technology, but I agrue they would not have the skilled labor to do this (then).  I am not aware that either the Allies or Axis built planes or tanks, etc in 3rd world countries.

yes $12 worth of units
but no can’t build 1 ftr ($10) + 1 tank ($5) because thats $15

“4 x IPC  income” is meant to be a simple rule to control both

*what you can build (eg. UK can’t build Carrier at India)
*how much IPC you can build

Or am I getting too anal here and sacrificing game play for realism?  Just looking for a clarification of the intent of the game, not trying to change any rules.

no we love your feedback
we just have to work it out

AARHE wants realism and gameplay
specific listings were avoided if possible

simple number based rules are good structure wise
you set a model and stick to it

unfortunately this requires numbers on the map to be realistic to start with
so some things don’t work out prefectly on some territories of the OOB map

but we are bound to overlook things, over time we discover alternative simple rules that leads to even greater realism

AA scale for destroyers is approximately 1/2400, 1" equals 200 feet.  On that scale an Iowa-class battleship would be almost 4.5" long, rather than the 2.25" it actually is.  Scale for the battleships runs from about 1/3600 for the UK Royal Soveriegn to about 1/4700 for the Iowa.  The Yamato is about 1/4200 and the Bismarck is about 1/4300.  The scale for the aircraft carriers ranges from the Wasp at about 1/3500 to the Shinano at about 1/4200, as all of the carriers are the same length, 2.5".  The two cruisers are about 1/3700 scale.  The subs range from the German Type VIIC at about 1/1400 to the Japanese I-15 class at about 1/2400.

If you buy 1/3000 scale ships, which is 1" equals 250 feet, an Iowa will run about 3.5 inches, considerably larger than the destroyers in the game.

Quote from: oldsalty on September 01, 2008, 07:17:52 am
That appears to make sense from the few pieces I’ve ordered to compare size and quality.

What is the difference between 1/2400 and 1/3000 in inches?  Looks like the 1/2400 is an USA scale (based in ft/in).  Is the 1/3000 the European scale based in meters?

Side by side, would a 1/2400 piece actually be 20% smaller than a 1/3000 scale piece?

A 1/3000 scale ship will actually be about 20% smaller than a 1/2400 scale ship.

I will post the scales for the aircraft once I finish measuring them.

Thats a complete waste of time…. The only scales for small inexpensive metal ships THAT IS ACTUALLY CURRENTLY IN PRODUCTION IS 1/2400 AND 1/3000…SO THE ONLY REALISTIC OPTION IS TO BUY 1/2400 SCALE WHICH ARE OFFERED FROM NAVWAR AND SKYTREX, WHILE 1/3000 SCALE IS TOO LARGE.

The scales are the same regardless representing objects 1/3000 or 1/2400 times smaller than original. Its not a Metric vs. English system.

Axis and allies uses 1/700 scale planes and 1/285 armor and 15 MM infantry ( or to convert you use HO 1/87 plastic or 1/72). These are the scales your looking for and i already posted the order sheet in another thread.

if you want to be able to move through enemy submarines in non-combat move, I am ok with it

yes they can pass thru. no special dispensations.

if you want to be able to retreat into a sea zone occupied by enemy submarines, I am not sure about that (as mentioned)
if so I rather we let defender retreat into ANY adjacent sea zone

They can retreat to ANY sea zone not occupied by enemy surface warships ( so they can enter SZ with subs or transports)

From now on subs and transports don’t do anything unless its their active turn.

Of course you can send ASW units and try and kill them by hunting them down.

also,have some new ideas for subs which are extremely simple, listed under AA50 house rules.

I want to make a new AARHE version for AA50 once we fix these semantic issues and clarifications.

I have a map that’s the best map you have seen. Id say its at least as good as the new map and done in the same style. Its 98% done. adding artistic items. I will release this and alot of files in a few weeks time.

thanks

yeah a few house rules went to the details of oil costs for movement
its probably too much accounting for all but the most “hardcore”

I some sort of victor/oil city would be a neat way to do it
if one side holds X of Y oil regions for Z turns, they win

ah yeah I think love multiple victory conditions