AARHE: Map files

So heres my latest map for A&A 1914. Includes East Prussia and all correct borders, Has some Zones for Askarideployment in Africa.

I kept Albania, neutral Greece and Moscow as Russian Capitol.

1914Balance.png

as we are learning now, 1940 is an easier year to set up, because the Axis and Allies are a little more clearley defined

Try using ANZAC pieces to represent France on the AA 50th board

France gets ….

France, Morocco Algeria, French West Africa, French Central Africa, Madagascar, and French Indochina.
A french infantry in Trans-Jordan to represent Syria, and a french canadian infantry too.

If paris falls on the first turn then at the end of the victorious nations turn (Germany or Italy) do the following. Roll a die, any French units AND/or territories (that do not contain other allied units) convert to axis units if they are the able to be reached from france by any route in the number of game spaces shown on the die. If other allied land units are present (UK) then those french units remain free french. French naval vessels are scuttled IF they convert and vessels of any other nation are present (including the allies)

On a roll of a 1 Germany gets the French Mediteranin fleet (Destroyer and Transport) and the french atlantic fleet (if the uk player took its units there as casualties and only french vessles remained after combat)
On a roll of a 2 they also get Morocco Algeria
On a roll of a 3 they cant claim any more units because there are no elegible units 3 game spaces away from france
On a roll of a 4 french west africa converts to the axis, syrian french do not convert because there are UK units there.
On a roll of a 5 french equatorial africa also converts
On a roll of a 6 Madagascar also converts.

remember the 4X rule in these places and also the variations on costs for infantry depending on VC.

1.  Is there a limit as to the number of infantry that can be built at VCs?

yes of course, the 4x rule…

2.  If China is incapable of replacing American aircraft or building armor, why are they given a factory in the game?  In reality, China had only the capability to build infantry - which was poorly trained and equipt.  The presence of a factory in the game allows for China to build any type of unit.

4x rule allows them to only build artillery or infantry ( or mech)

As infantry are built at victory cities, I propose removing the factory from China.

but what about artillery? China had artillery and they are but an army of misfits w/o them

Again go by the set up. Thats official.

once you find all discrepancies ill fix everything so its correct.I have no idea why these errors exist but we will fix them.

unless our German player is being too cautious, France has been very difficult.  At 15 IPC they generate 7 inf in their capital per turn.  I think Germany has too much along the Russian front for the 1st couple turns when Russia has no threat.

We will need to change Germany’s tactic and see what happens.

Germany takes Poland and Norway on turn one
On turn two they take Holland and finish off Norway
On turn three they send all their air force, armor and built up stuff and Frenchies have no answer.

You can even send the Italians in the south to finish the job.

AA scale for destroyers is approximately 1/2400, 1" equals 200 feet.  On that scale an Iowa-class battleship would be almost 4.5" long, rather than the 2.25" it actually is.  Scale for the battleships runs from about 1/3600 for the UK Royal Soveriegn to about 1/4700 for the Iowa.  The Yamato is about 1/4200 and the Bismarck is about 1/4300.  The scale for the aircraft carriers ranges from the Wasp at about 1/3500 to the Shinano at about 1/4200, as all of the carriers are the same length, 2.5".  The two cruisers are about 1/3700 scale.  The subs range from the German Type VIIC at about 1/1400 to the Japanese I-15 class at about 1/2400.

If you buy 1/3000 scale ships, which is 1" equals 250 feet, an Iowa will run about 3.5 inches, considerably larger than the destroyers in the game.

Quote from: oldsalty on September 01, 2008, 07:17:52 am
That appears to make sense from the few pieces I’ve ordered to compare size and quality.

What is the difference between 1/2400 and 1/3000 in inches?  Looks like the 1/2400 is an USA scale (based in ft/in).  Is the 1/3000 the European scale based in meters?

Side by side, would a 1/2400 piece actually be 20% smaller than a 1/3000 scale piece?

A 1/3000 scale ship will actually be about 20% smaller than a 1/2400 scale ship.

I will post the scales for the aircraft once I finish measuring them.

Thats a complete waste of time…. The only scales for small inexpensive metal ships THAT IS ACTUALLY CURRENTLY IN PRODUCTION IS 1/2400 AND 1/3000…SO THE ONLY REALISTIC OPTION IS TO BUY 1/2400 SCALE WHICH ARE OFFERED FROM NAVWAR AND SKYTREX, WHILE 1/3000 SCALE IS TOO LARGE.

The scales are the same regardless representing objects 1/3000 or 1/2400 times smaller than original. Its not a Metric vs. English system.

Axis and allies uses 1/700 scale planes and 1/285 armor and 15 MM infantry ( or to convert you use HO 1/87 plastic or 1/72). These are the scales your looking for and i already posted the order sheet in another thread.

ok lets talk about it in the setup thread

http://www.axisandallies.org/forums/index.php?topic=8697.0

so far only change is FTR (fighter) on CV (aircraft carrier) is NAV (naval fighter)

I agree, Adding more rules doesn’t make the game more ballenced or acurate usualy it just makes it longer, but sometimes I am in the mood or a realy long game :wink: