AARHE: Map files

Combine Venezuela/Colombia/Ecuador, Chile/Bolivia/Peru, and Argentina/Paraguay/Uruguay together. No need to change IPC values.

From a playability standpoint it makes no sense to have 9 little countries across the continent.

I play it like this and things can get interesting.

I am planning on printing one of IL’s maps. I’ll probably use his smaller AA50 and size it to 48x24.

The Factories (As well as some of the Mnor Axis Units) came from “The War Game” (which is a great game).

No, the map of Europe is that the increase of Europe on the main game board.
During the next game, I am going to fix both cards together.
Both map will be on same height.
One table instead of two.

AA scale for destroyers is approximately 1/2400, 1" equals 200 feet.  On that scale an Iowa-class battleship would be almost 4.5" long, rather than the 2.25" it actually is.  Scale for the battleships runs from about 1/3600 for the UK Royal Soveriegn to about 1/4700 for the Iowa.  The Yamato is about 1/4200 and the Bismarck is about 1/4300.  The scale for the aircraft carriers ranges from the Wasp at about 1/3500 to the Shinano at about 1/4200, as all of the carriers are the same length, 2.5".  The two cruisers are about 1/3700 scale.  The subs range from the German Type VIIC at about 1/1400 to the Japanese I-15 class at about 1/2400.

If you buy 1/3000 scale ships, which is 1" equals 250 feet, an Iowa will run about 3.5 inches, considerably larger than the destroyers in the game.

Quote from: oldsalty on September 01, 2008, 07:17:52 am
That appears to make sense from the few pieces I’ve ordered to compare size and quality.

What is the difference between 1/2400 and 1/3000 in inches?  Looks like the 1/2400 is an USA scale (based in ft/in).  Is the 1/3000 the European scale based in meters?

Side by side, would a 1/2400 piece actually be 20% smaller than a 1/3000 scale piece?

A 1/3000 scale ship will actually be about 20% smaller than a 1/2400 scale ship.

I will post the scales for the aircraft once I finish measuring them.

Thats a complete waste of time…. The only scales for small inexpensive metal ships THAT IS ACTUALLY CURRENTLY IN PRODUCTION IS 1/2400 AND 1/3000…SO THE ONLY REALISTIC OPTION IS TO BUY 1/2400 SCALE WHICH ARE OFFERED FROM NAVWAR AND SKYTREX, WHILE 1/3000 SCALE IS TOO LARGE.

The scales are the same regardless representing objects 1/3000 or 1/2400 times smaller than original. Its not a Metric vs. English system.

Axis and allies uses 1/700 scale planes and 1/285 armor and 15 MM infantry ( or to convert you use HO 1/87 plastic or 1/72). These are the scales your looking for and i already posted the order sheet in another thread.

@oldsalty:

Bierwagan:

How would you have played your example if it were a bomber instead of a ftr?

Moin OldSalty!

I haven’t had a lone bomber defending a territory yet.  But, it wouldn’t really change anything.  Air units only get full attack strength when coupled with ground forces on a 1-to-1 basis.

@AAHRE:

Air Supremacy
When only one side has air units at the beginning of
combat cycle, air units fight with normal combat values
when matched 1-to-1 with a friendly land unit. Excess
air units fight at combat value of 1.

So, the bomber would have Air Supremacy but would only get a parting shot at 1 (n.b., bombers don’t get to select targets it is just carpet bombing) – then it would have to withdraw due to:

@AAHRE:

Land Combat: Retreat Decision
At the end of a land combat cycle, if only one side has
land units the other side must retreat.

TTP (Tactics, Techniques, and Procedures) insight for the day!
This becomes tactically significant later on in the game when you don’t have many ground units left.  I’ve seen people attack what looks like a solid defense in Berlin by tying up all the airplanes in the sky.  Then all you have to do is blast away the few defenders on the ground and “voila!” the vaunted Luftwaffe is forced to retreat because they have no land units, giving you the country and victory!

This really causes you to re-evaluate defense on the ground.  You have to watch UK as well because normally it’s just used as a non-mobile aircraft carrier – but NO MORE!

It’s all about balance… and aircover!  IL & Tekkyy have done a wondermus job of levelling the playing field and making it a real slobberknocker of a tactical puzzle.

Enjoy the day!

How about making it, if you don’t controll an oil rich territory, all unit movemt, except INF and ART (they could use horses for that) have only half their movement, and may not blitz.

MECH, ARM, BB, DD,TP and SS move only 1
CV,CA and fig move 2
BOMBERS move 3

Could also be used in AAR and if defined also AARHE…  Just define oil rich territories first.

oh I see
thats fine
the current tech list welcomes scrutiny

check out the draft detailing the techs if you haven’t already

the heavy artillery gives you a new unit at 5 IPC 3/2, it has ability to fight in adjacent territory with -1 modifier, provided itself is not being attacked