AARHE: Map files

My rationale for altering territory PF values was to attempt to make them more ‘relatively’ accurate. Part of the problem is that A&A is a simplified simulation. A simplified map and simplified PF values.
My proposed changes barely alter the map (I include a new South India Territory). Where I attempted an alteration was to spread PF values into ‘Siberian Territories’ , to better reflect Canadian PF values and to do the same with ‘Indonesian’ Territories.
Kreuzfeldt, I am not or was not basing my alterations on ‘oil’ or ‘resources’ only. A&A, in all it’s various incarnations, is a simplified simulation.
As to your numbered points;

The map given is the map that must be worked with. I had no thought of population as opposed to resources. My alterations to PFs are my opinion of the relative values of the Territories affected. There is an emphasis on Canada to more accurately, imho, reflect it’s component parts. I am a Canadian so I wish to see a better relative accuracy there (here). The maps and the PF resource values may not be entirely accurate for the original territories (or even for my suggestions). Again, A&A is a very simplified simulation. Compromises have to be made. It is a fact that capital Territories, especially, in Europe (& for Japan territory) HAD the overwhelming or virtually all the concentrated industry (& resources). This explains where the Factories are placed. I see no problem, therefore, that PF values for France, West Germany or Russia are increased somewhat. You think the UK (England territory) should be worth considerably more than ‘France’ (Paris) or West Germany (the Ruhr)? Your choice, not mine.
4)My intent was to give ‘relative’ value to as many ‘spaces’ (territories) as possible. This is why I added value to some of the ‘Siberian’ territories in the USSR. This is why I spread the Indonesian values out to a few more spaces. The idea of ‘oil’ is subsumed into the game. It is not necessary to make Rumania so valuable (6 pts) as you suggest. I could be incorrect about the relative value I give to the Urals & NovoSibirsk, however, I observe that the ‘Urals’ space  reflects the ‘northern (arctic) Urals’ (hardly the space for industry). NovoSibirsk space could have a higher value. Note, Kreuzfeldt, the actual names used in the USSR & the fact many of these ‘spaces’ would have had a value greater than 0. Hence, I place a number of ‘value territories’ in the spaces that reflect ‘Siberia’ or parts thereof). So, I am trying (tried) to reflect an importance for Siberia (more, in fact, than the original map).
I did not alter the PFs (total points) of any ‘Nation’ from the original game. I simply attempt to offer a more accurate ‘relative’ PF value for certain Territories. I created a few new Territories but only where logical and where able (using the original map given).
Some players may dispute my new ‘relative’ PF Territory values. I am sure some values might be altered, however, not by much, imho.
As to A&A maps? All I will say is they have improved from the original but they still present ‘problems’.
Again, A&A is a simple simulation and ‘compromises’ are (& will) be made. The above Global 1940 Map alterations are my suggestions to making this map a little bit ‘better’.

What software program do you use to edit the map?

Combine Venezuela/Colombia/Ecuador, Chile/Bolivia/Peru, and Argentina/Paraguay/Uruguay together. No need to change IPC values.

From a playability standpoint it makes no sense to have 9 little countries across the continent.

I play it like this and things can get interesting.

@Black_Elk:

That’s a clean map Ryuzaki_Lawlie!

The color selection is ideal. Though the black impassibles still jump out at me

From a design standpoint the only things that catch my eye are the two round sea zones surrounding Japan and Hawaii.

It feel like you need one in the Atlantic to balance things out aesthetically. Have you considered the possibility of one surrounding the British Isles?

Or maybe Iceland? Or maybe both?

I still think Mercator is a bit tight in Europe, a little stretching there might be ideal, even if it was just along the vertical axis. I think the map would still read fine, but you’d get a few more pixel for units into those key European spots. Also if you were willing to shrink South America slightly you could almost curve off a 10th of the map height at the bottom of the screen (which is notorious for players forgetting units in the south sea hehe) without really needing to change Africa/Australia of the pacific. Basically a slight bend would go a long way, even if using Mercator for the baseline.

Oh and I think the possession colors for Dutch Borneo and British Sarawak and North Borneo should be reversed.

My only suggestions :)

Nice work man. That would be a fun map to form the basis of a 1939 game, or any year from 39 on.

I like that you have not yet imposed on the map any extraneous information such as IPC values or VC. This means the map is adaptive for many purposes. I like the general division of territories. Only that the projection is a bit large at the poles for my tastes. If we could shrink them up slightly I think the map would be ideal. Its really more about screen dimension for me when it comes to the Big World Map that Wandering Head made. These days most screens are very long relative to their height, so standard Mercator always seems blown out a bit in tripleA to me, especially at the south end, and of course Europe is always tight. I wish the center picker for tripleA was better at housing units to smaller scales. Its a little better than it used to be, especially with the guiding lines, but still Europe loves to clutter up haha.
:-D

Again though, great design direction!

I’ll probably shift the continents (turning their general direction), and stretch out northern Africa and Europe, will probably require North America to get a bit skinny, but I think the big benefit from this, is that potentially more European spaces can be added. This will allow me to add more to the Mediterranean however (and it really needs the space), perhaps round out where Rome is. Africa, I think needs a bit more work. South America possibly as well, but I sort of need an idea of which cities can be considered major not only there, but elsewhere. Vladivostok will defiantly get added in with it’s own space.

I picked black for impassables, since it tells me that there is nothing there, no play space, it’s simply temporary, and they are there for the designer’s benefit.

I’m not sure where else to put a rounded Sea Zone, I’m considering more though.

I would like to be able to share the Axis & Allies Community maps, charts, tokens, aids, & Variants on my website. I already have one game system with map, rules, and setups that someone asked that I share with the Community, my only stipulation is that I am able to link to it within my web site that say it used a special color tank and I have it, I will link to it, tokens, etc. (It’s business)  :-D
Please email me your file(s) and a description on what you want on the site with your email or any credit for your work if you want it. It be be put on my site for downloads. If the file is too large, I will have to link it to mediafire where they can download it from there.
Thanks

@Imperious:

This is how AA should look except with areas carved out. No roundels, just flags. And just one flag per nation, not 15.

Don’t know what you’re talking about.

Manchester should, of course, be in 0934.  I’d put Hamburg in 1228.

One or two slip-ups with the flags, but overall a very impressive map.

I worked on the Wars of the Roses map (the heraldry is mine), and I’m developing an expanded version of Warriors of God.

oldsalty, regarding India and third world I think the problem is best addressed by playing with custom income values (rather than a specific rule)

AARHE don’t adjust it as it intends to be a house rule rather than a variant
even then variant map “AARHE 1939” is not that “pure” and gave India 4 IPC hehe

buy some number chips, Imperious can probably tell you where to get that kind of stuff

ok good.