AARHE: Map files

@Black_Elk:

That’s a clean map Ryuzaki_Lawlie!

The color selection is ideal. Though the black impassibles still jump out at me

From a design standpoint the only things that catch my eye are the two round sea zones surrounding Japan and Hawaii.

It feel like you need one in the Atlantic to balance things out aesthetically. Have you considered the possibility of one surrounding the British Isles?

Or maybe Iceland? Or maybe both?

I still think Mercator is a bit tight in Europe, a little stretching there might be ideal, even if it was just along the vertical axis. I think the map would still read fine, but you’d get a few more pixel for units into those key European spots. Also if you were willing to shrink South America slightly you could almost curve off a 10th of the map height at the bottom of the screen (which is notorious for players forgetting units in the south sea hehe) without really needing to change Africa/Australia of the pacific. Basically a slight bend would go a long way, even if using Mercator for the baseline.

Oh and I think the possession colors for Dutch Borneo and British Sarawak and North Borneo should be reversed.

My only suggestions :)

Nice work man. That would be a fun map to form the basis of a 1939 game, or any year from 39 on.

I like that you have not yet imposed on the map any extraneous information such as IPC values or VC. This means the map is adaptive for many purposes. I like the general division of territories. Only that the projection is a bit large at the poles for my tastes. If we could shrink them up slightly I think the map would be ideal. Its really more about screen dimension for me when it comes to the Big World Map that Wandering Head made. These days most screens are very long relative to their height, so standard Mercator always seems blown out a bit in tripleA to me, especially at the south end, and of course Europe is always tight. I wish the center picker for tripleA was better at housing units to smaller scales. Its a little better than it used to be, especially with the guiding lines, but still Europe loves to clutter up haha.
:-D

Again though, great design direction!

I’ll probably shift the continents (turning their general direction), and stretch out northern Africa and Europe, will probably require North America to get a bit skinny, but I think the big benefit from this, is that potentially more European spaces can be added. This will allow me to add more to the Mediterranean however (and it really needs the space), perhaps round out where Rome is. Africa, I think needs a bit more work. South America possibly as well, but I sort of need an idea of which cities can be considered major not only there, but elsewhere. Vladivostok will defiantly get added in with it’s own space.

I picked black for impassables, since it tells me that there is nothing there, no play space, it’s simply temporary, and they are there for the designer’s benefit.

I’m not sure where else to put a rounded Sea Zone, I’m considering more though.

as we are learning now, 1940 is an easier year to set up, because the Axis and Allies are a little more clearley defined

Try using ANZAC pieces to represent France on the AA 50th board

France gets ….

France, Morocco Algeria, French West Africa, French Central Africa, Madagascar, and French Indochina.
A french infantry in Trans-Jordan to represent Syria, and a french canadian infantry too.

If paris falls on the first turn then at the end of the victorious nations turn (Germany or Italy) do the following. Roll a die, any French units AND/or territories (that do not contain other allied units) convert to axis units if they are the able to be reached from france by any route in the number of game spaces shown on the die. If other allied land units are present (UK) then those french units remain free french. French naval vessels are scuttled IF they convert and vessels of any other nation are present (including the allies)

On a roll of a 1 Germany gets the French Mediteranin fleet (Destroyer and Transport) and the french atlantic fleet (if the uk player took its units there as casualties and only french vessles remained after combat)
On a roll of a 2 they also get Morocco Algeria
On a roll of a 3 they cant claim any more units because there are no elegible units 3 game spaces away from france
On a roll of a 4 french west africa converts to the axis, syrian french do not convert because there are UK units there.
On a roll of a 5 french equatorial africa also converts
On a roll of a 6 Madagascar also converts.

remember the 4X rule in these places and also the variations on costs for infantry depending on VC.

1.  Is there a limit as to the number of infantry that can be built at VCs?

yes of course, the 4x rule…

2.  If China is incapable of replacing American aircraft or building armor, why are they given a factory in the game?  In reality, China had only the capability to build infantry - which was poorly trained and equipt.  The presence of a factory in the game allows for China to build any type of unit.

4x rule allows them to only build artillery or infantry ( or mech)

As infantry are built at victory cities, I propose removing the factory from China.

but what about artillery? China had artillery and they are but an army of misfits w/o them

yeah its the intentional
the strategic situation is different between 39 and 42
China was isolated from help due to losing coastal areas

ok thats fine then.

@Lelouch_21:

2- On the rules I found this one “You do not collect any IPC during setup.” so on the first turn no one can buy right? It seems impossible, we try to play a game in this way but there weren’t anough troops on the board for conduct any combat… probably I don’t get the rule, someone can explain it to me?

3- On the URRS special turn the Russian can collect ipc, buy units, develop weapons and diplomacy or they can only move troops and attcka?

Hi Lelouch I just stumbled across these rules today, and I believe in the first turn only Russia moves, and does not collect any income and builds no units. Then, every successive round all nations collect income at the beginning of their turn* and so every nation also builds units starting from that turn.

I love copy and paste  :-).

I am a big fan of Diplomacy, but can’t imagine adding simultanious movement to A&A. First, as Imperious Leader noted, there would be a large amount of moves to write. In Diplomacy a leader has to write at most 17 orders, but will generally need to issue 5-10. In Axis and Allies both the number and the complexity of the orders increases.
Second, writing down orders will likely serve as somewhat of a deterent to inivation. For example; as Germany I draft a set of orders to strike the U.S.S.R at Causcus and Karelia. If I suddenly see a stronger strategy that involves me completely changing my orders for both countries, the time I already put in that will be lost and the time I will need to write up new orders may deter me from attempting my new course of action. Having to continuously edit a page or two of orders will be tedious.
Third, in real life military leaders would re-act to enemy movements. If as Japan I ordered my units in Kwangtung, Manchuria, and French Indochina to attack China, but was attacked by units in Soviet Far East and India my attack would not proceed. Not only that, the Manchurian units would likely be diverted to re-inforce and/or counter-attack.

Yep thats correct… but once Moscow is fallen its possible for western allies to move into Soviet territories because after all communism has fallen and Stalin is dead.

see its quite simple rule