AARHE: Map files

Yeah it’s a bit crude, and not really original but it was the first map I’ve made for AA, I’m hoping I’ll get better as I get more practice. :-)

as we are learning now, 1940 is an easier year to set up, because the Axis and Allies are a little more clearley defined

Try using ANZAC pieces to represent France on the AA 50th board

France gets ….

France, Morocco Algeria, French West Africa, French Central Africa, Madagascar, and French Indochina.
A french infantry in Trans-Jordan to represent Syria, and a french canadian infantry too.

If paris falls on the first turn then at the end of the victorious nations turn (Germany or Italy) do the following. Roll a die, any French units AND/or territories (that do not contain other allied units) convert to axis units if they are the able to be reached from france by any route in the number of game spaces shown on the die. If other allied land units are present (UK) then those french units remain free french. French naval vessels are scuttled IF they convert and vessels of any other nation are present (including the allies)

On a roll of a 1 Germany gets the French Mediteranin fleet (Destroyer and Transport) and the french atlantic fleet (if the uk player took its units there as casualties and only french vessles remained after combat)
On a roll of a 2 they also get Morocco Algeria
On a roll of a 3 they cant claim any more units because there are no elegible units 3 game spaces away from france
On a roll of a 4 french west africa converts to the axis, syrian french do not convert because there are UK units there.
On a roll of a 5 french equatorial africa also converts
On a roll of a 6 Madagascar also converts.

maybe Cruiser and Aircraft Carrier shouldn’t take 2-hits after all

I haven’t played games with all optional units select for play (usually only select naval fighter)
but yeah its funny how:
BB 2-hit, 2-turn
CA 2-hit, 1-turn
CV 2-hit, 2-turn

yes but we are working on that now with 4.1 no more 2 turn naval builds.

carriers could go to 1 hit units and of course the latter file for AA50HE will have them just at 1 for both CA and CV.

There are a few discrepancies between the 1939 map with set ups and player set up charts in the 1939 rules.

1.  France listed w 6 infantry set up charts:  4 on map
2.  UK shows only Factory in Canada and Australia on 1939 set up charts:  map adds factory in UK and India.

There may be more, this is the most obvious.  I assume the map is correct.  are there updated set ups?  The one I’m refering to is on the download dated 3-08. http://home.exetel.com.au/cometo/aarhe/

Also, on the 1939 map, the UK starts with a factory in India.  This gives UK 4 factories.  Should the UK have a factory in India, particularly in 1939?  Did India have such capability in producting ships, planes, armor etc that early?  I’d rather see UK required to build one.

looking into this now…

AA scale for destroyers is approximately 1/2400, 1" equals 200 feet.  On that scale an Iowa-class battleship would be almost 4.5" long, rather than the 2.25" it actually is.  Scale for the battleships runs from about 1/3600 for the UK Royal Soveriegn to about 1/4700 for the Iowa.  The Yamato is about 1/4200 and the Bismarck is about 1/4300.  The scale for the aircraft carriers ranges from the Wasp at about 1/3500 to the Shinano at about 1/4200, as all of the carriers are the same length, 2.5".  The two cruisers are about 1/3700 scale.  The subs range from the German Type VIIC at about 1/1400 to the Japanese I-15 class at about 1/2400.

If you buy 1/3000 scale ships, which is 1" equals 250 feet, an Iowa will run about 3.5 inches, considerably larger than the destroyers in the game.

Quote from: oldsalty on September 01, 2008, 07:17:52 am
That appears to make sense from the few pieces I’ve ordered to compare size and quality.

What is the difference between 1/2400 and 1/3000 in inches?  Looks like the 1/2400 is an USA scale (based in ft/in).  Is the 1/3000 the European scale based in meters?

Side by side, would a 1/2400 piece actually be 20% smaller than a 1/3000 scale piece?

A 1/3000 scale ship will actually be about 20% smaller than a 1/2400 scale ship.

I will post the scales for the aircraft once I finish measuring them.

Thats a complete waste of time…. The only scales for small inexpensive metal ships THAT IS ACTUALLY CURRENTLY IN PRODUCTION IS 1/2400 AND 1/3000…SO THE ONLY REALISTIC OPTION IS TO BUY 1/2400 SCALE WHICH ARE OFFERED FROM NAVWAR AND SKYTREX, WHILE 1/3000 SCALE IS TOO LARGE.

The scales are the same regardless representing objects 1/3000 or 1/2400 times smaller than original. Its not a Metric vs. English system.

Axis and allies uses 1/700 scale planes and 1/285 armor and 15 MM infantry ( or to convert you use HO 1/87 plastic or 1/72). These are the scales your looking for and i already posted the order sheet in another thread.

by the way, its buggy at the moment

*some units can move in both combat and non-combat

*not landing friendly air units (which you can’t control) would render them destroyed
(eg. Japanese planes in the axis collided “turn”)

*you can SBR victory cities (which is not too bad since in AARHE SBR is not restricted to ICs)

no we don’t need LHTR, because they uses different victory conditions and has different takes because its tailored for Tournament games. Our rules superseed LHTR EXCEPT for issues that we don’t clarify, that document overrides.

yeah not much to be said here
nothing “new”