Magnetic Bombers

@The-Captain
I used 3mm thumb nuts drilled out to fit 3mm acrylic rods. I used a number of 3d printed jigs for cutting the rods, assembly of the stands and gluing the magnets. If I remember later I’ll attached some pictures of the jigs/stands

@Radar alt text

Setup complete. Plating against chatgpt now and it made some horrific mistakes. My Italian navy destroyed the British Mediterranean fleet in turn 1 😂

@Der:

Cool - go to the last page for latest downloads (7.0)!

Missed that. Thx.

@siredblood:

@GeneralHandGrenade:

I couldn’t find any magnets that thin. I just redid mine yesterday and had to use thicker ones. Good job Sired.

I don’t know if they have Home Depot in Canada, but that’s where I got it, if not, you can find it here :

http://www.homedepot.com/p/MASTER-MAGNETICS-3-4-in-x-26-ft-Magnetic-Tape-with-Dispenser-96774/204752648?cm_mmc=Shopping%7cTHD%7cG%7c0%7cG-BASE-PLA-D25H-Hardware%7c&gclid=CN-u3In81tECFUi2wAodQuQIAA&gclsrc=aw.ds

It has bad reviews lol, but it works good, just don’t stick to anything. However the drop of super glue seems to work, as they have never fell off.

Thanks for the comment cyanight, all your magnetic mods are pretty amazing!

We do have Home Depot (all over the place here), but they don’t seem to carry Magnetic Tape.,… well, they do, but it’s this stuff : https://www.homedepot.ca/en/home/p.12-x-10-magnetic-tape.1000418120.html?autoSuggest=pip which wouldn’t work as it’s a LOT thicker.

I HAVE however seen that stuff at Micheals Arts and Crafts. You’re right, it doesn’t stick well (or at all) so superglue is a must.

Ready to be placed on the board.

Magnetic Carrier 1.jpg
Magnetic Carrier 2.jpg

You guys might want to check these sites out. Or just scroll up above this post.

@Imperious:

I found it.

http://corseceng.com/omni-stand/

This link has everything you need.  I will be using the black 30 mm stand with peg and micro magnets from the above link.

I think for global 40 sets will suffice, possibly 50. Need micro magnets for all the planes ( about 80-90) and 40 for the stands.

@Imperious:

I am combining the resources for making these bases.

This site has the proper magnets. Still looking for metal rods that are pre-cut about 2 inches.

A friend of mine has the most perfect examples. Here is what he did ( reprinted from email).

I bought the magnets from K&J Magnetics…  They were almost the smallest available size with a hole in the center to fit a 1/16" rod.

I drilled holes in pennies, glued 1/16 inch brass rod into them, placed the magnet on top and glued it down.

http://www.kjmagnetics.com/products.asp?cat=10
http://www.kjmagnetics.com/proddetail.asp?prod=RC22  ( this link has the base with 1/8 OD hole)

@Gargantua:

http://www.axisandallies.org/forums/index.php?topic=21083.0

Is a link where YOU personally link the instructional!

Also
http://www.axisandallies.org/forums/index.php?topic=21207.0

@Gargantua:

Somewhere in the customizations section a guy made a whole tutorial, with downloadable PDF’s.

Other Links

http://www.axisandallies.org/forums/index.php?topic=22472.0

http://www.downloadonline.info/dl/870394/magnetic_ac/

@dedo:

Oh, sorry, I didn’t know about that thread, eventually I lost my labour and waisted your time…

No problem.  There’s so much information scattered in so many threads on this board that it’s impossible to keep track of it all, so repeating a particular point of information can be very useful, especially to people who may have missed its first appearance elsewhere.  I just happened to remember the reference to the Beaufort because that information had been posted in response to a question I’d asked…and even then, I had to use the Search function to track down where I’d seen it because it was several months ago.

Hey Everyone,

Just joined the forum because I was looking for ideas on customizing my new G40.  It’s awesome to see all the information that you guys are posting.  I’m just learning how to navigate through this forum and I’m looking forward to be a part of the community. Sorry if this is the wrong section to say hello.