@Midnight_Reaper Thanks. These are cool but not exactly what I am looking for. I will keep looking as I don’t know if it is ok to post a picture of the map here to show you exactly what I mean. The Canadian mapleleaf is good but I am looking for the fascist Italian roundel, the Russians have a star instead of the traditional OOB, the German iron cross is similar except that the background is grey instead of red and then ANZAC has been modified with a blue circle emblem. I am also new to all of this so if it sounds like I don’t know what I am really talking about…that is because I dont really know what I am talking about.:grinning:
Custom Magnetic IPC & Tech Tracker Board
-
Hey folks,
This is my first post to the site and I’ve recently started my customization journey with AA50. My best customization yet is this magnetic tracker board set. The roundels are 3d printed by my design with press fit magnets. The boards are just common steel sheets with a label applied that I designed. The bases are another self designed base for angling the sheets and storing the extra roundels.Let me know what you think!
(https://drive.google.com/drive/folders/1zllLFe2Offr3GEfH0-JTNgcGUK6Ha_oL?usp=sharing)
-
@TitusJames Welcome to the forum.
I recommend that you convert your *.heic images to *.jpg and upload those directly to your posting.
-
@Panther Thank you! I will do so from now on!
-
@TitusJames

-
@TitusJames
Hi Titus,
Awesome - looks great.
What materials did you use for the base to your aircraft stands ?
We have attached a few pictures from our Global 1940 Expansion game where we use similar aircraft stands.
Captain

-
@The-Captain
I used 3mm thumb nuts drilled out to fit 3mm acrylic rods. I used a number of 3d printed jigs for cutting the rods, assembly of the stands and gluing the magnets. If I remember later I’ll attached some pictures of the jigs/stands





