Im not talking about a digital Map, but a real one. I consider myself very artistically minded so I think I could do it without it looking too bad. What materials would I need, how much time would it take? I wanna do a global map from about 1920.
Custom Magnetic IPC & Tech Tracker Board
-
Hey folks,
This is my first post to the site and I’ve recently started my customization journey with AA50. My best customization yet is this magnetic tracker board set. The roundels are 3d printed by my design with press fit magnets. The boards are just common steel sheets with a label applied that I designed. The bases are another self designed base for angling the sheets and storing the extra roundels.Let me know what you think!
(https://drive.google.com/drive/folders/1zllLFe2Offr3GEfH0-JTNgcGUK6Ha_oL?usp=sharing)
-
@TitusJames Welcome to the forum.
I recommend that you convert your *.heic images to *.jpg and upload those directly to your posting.
-
@Panther Thank you! I will do so from now on!
-
@TitusJames

-
@TitusJames
Hi Titus,
Awesome - looks great.
What materials did you use for the base to your aircraft stands ?
We have attached a few pictures from our Global 1940 Expansion game where we use similar aircraft stands.
Captain

-
@The-Captain
I used 3mm thumb nuts drilled out to fit 3mm acrylic rods. I used a number of 3d printed jigs for cutting the rods, assembly of the stands and gluing the magnets. If I remember later I’ll attached some pictures of the jigs/stands





