Global 1940 & 1943 Expansions Game Reports

@The-Captain

Finished reading it.

Looks great!

Hopefully in the future you can add Japanese impulse rounds to reflect their action in the Second Sino-Japanese War (maybe even simulate Khalkhin Gol).

@the-captain

Due to the fact that whilst most of your rules are historically accurate, their execution I have some problems with. To fix that, I wrote an article on changes to The Captain’s rules:

https://www.axisandallies.org/forums/topic/37504/let-s-make-the-axis-and-allies-global-1940-expansion-rules-even-more-accurate?_=1636385389023

Xeno games had it as roll two dice for repair cost and had to be in port, which was a coastal factory as they didn’t have NBs. Also BBs couldn’t bombard while damaged

Hi Erocco,
these numbers are based on a formula found during Classic time by Dauvio Vann and his friends, then improved and adjusted to better fit the need of Second Edition units. Here is one link in House Rule:
http://www.axisandallies.org/forums/index.php?topic=40346.msg1684954#msg1684954

Below, you get the whole formula and a short explanation:

@Baron:

@Dauvio:

It came to my attention that one of my formulas are already out there that I discovered 30 years ago.
http://www.axisandallies.org/forums/index.php?action=profile;u=185969 has also discovered the formula P^2*N=S
And just for fun you can try these formulas also. S/P^2=N. √(S/N)=P
P=POINTS
N=NUMBER OF UNITS
S=STRENGTH OF ONE KIND OF UNITS IN A TERRITORY
This formula should replace the punch formula. It is much better then the punch formula.

Now the next formula is (P100)/(C^26)=S
P=POINTS
C=COST
S=STRENGTH OF THE UNIT BASED ON COST
With this formula you can also price units according to their strength. √((P100)/(S6))=C
This formula is for points. (S*(C^2*6))/100=P

For better results for some of these formulas, have all your units cost ten times then what they are. These are some of the VANN FORMULAS I came up 30 years ago.

If you have any questions about these formulas, please ask.

I found how you can get the main part of Vann formula or Baron-Larrymarx according to a specific unit as benchmark.

I took the Fighter A3 D4 C10 and I wanted to convert into Tank A3 D3 C6 as benchmark (Baron-Larrymarx formula).

Then I saw what I did.

Power (of attacking Fighter): A3 * C6 (cost of Tank)/C10 (cost of Fg) * 1 Hit Point C6 (cost of Tank)/C10 (cost of Fg) = 1.08
You can reduce this equation because (cost of Tank)(cost of Tank)/ (cost of Fg)*(cost of Fg) is same to
(cost of Tank) IPCs^2 / (cost of Fg) IPCs^2 and give a simple ratio.

C6^2*A3/C10^2 = 1.08
36 squared IPCs 3 Power * 1 Hit /100 squared IPCs = 1.08 PowerHit Point

This explained what is hidden in Baron-Larrymarx formula:
Offence or defence strength factor= 36*Power/Cost^2.

The whole Enigma formula is
Refence unit Cost^2Power of the actual unit1 HP/Cost of the actual unit^2

So, the Basic offence or defence strength factor result (1.08, in this case) is express in Power*Hit Point
1^2*Power (of a given unit)*1 hit/Cost (of this same given unit)^2

And this formula can be adapt according to any benchmark, for instance a 1 IPC unit:
131 hit/10^2 = 0.300

And this is a very small number. That’s why Vann formula:
Strength= (Power100)/(Cost^26)

add an arbitrary 1001/6= 16.667…
So, 16.667131 hit/10^2 = 0.5
And this would provide the Fighter strength attack factor based on an hypothetical benchmark unit of √16.667 = 4.0825 IPCs.
A 5 IPCs revised Tank in Vann formula gives a Strength : 16.66731 hit/5^2 = 2.00 powerhit

Can you elaborate on the ship calculations?

Destroyer strength: .30144/8^2  = 0.675
Cruiser    strength: .60144/12^2= 0.600
Battleship strength: .701442.618/20^2 = 0.660

These numbers means that Destroyer is the most optimized unit for combat to buy for each IPC invested, then it is battleship and finally Cruiser.
Said otherwise, Cruiser is sub-optimal for the cost.
3 DDs C8 A3 D3 (A9 D9, 3 hits) will be stronger than 2 Cruisers C12 A6 D6 (A12 D12, 2 hits) if you can use a Battlecalc to test D10-sided values.

From stronger to weaker for 120 IPCs basis:
15 DDs A3 D3 (A45 D45)
6 BBs A7 D7 (A42 D42)
10 CAs A6 D6 (A60 D60)

The new map is an uneasy compromise, with some tts values reflecting oil wealth, others not.

Personally I prefer adding industrial base and mineral resources together to create a single economic index, but the separate oil values have been tried:

http://www.basesproduced.com/aaa.html

The big problem is that the Allies always have more than enough oil, the Axis hardly ever enough.  Forcing the Axis to take oil centres to keep going makes their moves very predictable.

Its like Tank Blitzing. If the SZ has an enemy token but unoccupied, IN NCM you must stop. Only in combat can you blitz into two empty zones.

The map will look more like a history book showing the control of sea zones. I guess you need more tokens.

As a huge fan of Imp Games’ East & West, these kinds of games always intrigue me. It’s set in 1948, so there are some similarities to the '46 scenario.

IMHO, 1948 is sort of the high-water mark for NATO (i.e. the European empires) however, East & West is a bit non-historical in this sense.

• NATO was not formed until 1949
• Turkey and Greece did not join NATO until 1952, but are part of the Alliance in-game
• Pakistan, India, and Burma were all independent of Britain in 1948; in E&W they are still part of the empire, and a huge thorn in the side of the USSR
• The breakdown of Indonesia between Dutch-controlled areas and independent(ish) ones is not in line with history

The other high-water mark of the Cold War (based on my research) is around 1975-76. Off the top of my head:

• The Vietnam War was over; Cuba, Afghanistan, Angola, Mozambique, and Ethiopia were all ruled by communist regimes. The USSR (or Warsaw Pact) was at the height of its influence
• The Arab League had expanded across all of north Africa; the Islamic Conference also greatly increased its membership around this time
• The Central Treaty Organization (CENTO) including Turkey, Iran, and Pakistan, as well as the Southeast Asia Treaty Organization (SEATO) including Thailand, Philippines, Australia and New Zealand were still in existence, supported by the major NATO powers of the US, UK, and France
• China had annexed Tibet and fought a small war with India

I’ve done work on 1975-76 scenarios for both the Original A&A as well as E&W and have done a fair bit of study on the cold war era “map” so to speak. If anyone wants to discuss the subject/games here or in a PM, I’d be very happy to respond. :-)

Ah…way better flashman.
More realistic.

But Iraq must be pro axis at the beginning and should be annexed and or Attack by UK.
Persia = 2 TT. North and south.
North side should be annexed by USSR.
South side by UK.
All Yougoslavia was not pro axis. The Serbian and the Russians were friends
So Yougoslavia = 2 TT.
Croatia and Serbia.

ROMANIA is a problem in that it should still be in control of Bessarabia.  It was the grabbing of this province by Stalin in July that propelled Romania into the Axis camp.
Suggestion: Romania pro-Axis, Bessarabia pro-Allied? 
OR Romania combined is neutral, but invasion of one part by a power makes the other part pro the other alliance.
2 TT:  Romania and Bessarabie. If USSR attack or annexe Bessarabia, this will not declare war against Germany.