Lt. Dan's G40 Map "Memphis Belle" Edition

@marc131 Here is a drive link with the XCF file and the raw map file.

https://drive.google.com/drive/folders/1T0ta6maV3rIRHLilHiYfl1ThUgR4dgP4?usp=sharing

@monroe Actually I hear that a whole turn equates to 6 months for A&A…

@manincellv awesome looking map!

@Valladares Noted! Will change ASAP

@DMcLaren Hey thanks! Only with that version. Anniversary got the same treatment (kept it completely original) and currently tapping away at 1914. But I know what you mean. Once the bug bites…

@folewnik as a small time scale modeler, I very much admire your work. You have exceptional attention to detail so I thank you very much for this compliment.

@Ghoster Thanks! And that’s awesome! I think you’ll really enjoy the experience. I’ve been asked this several times now so I’ll just post it here and on YouTube:

Russia - TS-62 NATO Brown
UK - TS-46 Light Sand
USA - TS-28 Olive Drab 2
Germany - TS-6 Matte Black
Australia - TS-66 IJN Gray
Italy - AS-22 Dark Earth

the rest were bottle paints shot from an airbrush:
France - XF-18 (tamiya)
China - Interior Green mixed with some yellow
Japan - Model Master’s Italian Red mixed with Rust from the same company

Lompestein, thanks for the complements, pretty much everybody else was underwhelmed. I mounted a 5 ft version on press board I cut into a circle and mounted on a lazy susan so you could spin it. Played twice on it but the guys I played with were interested in the regular maps.

I made this after injuring my leg at work and was immobile for a while. It took a long time, about a couple of months of daily tinkering. I enjoyed it, kept me busy.

What I had to do was cut the map into about 16 to 20 horizontal strips. I didn’t keep the original files they died with an old computer I used. I used the polar function in gimp under distorts to spin the map into a circle.

I would then individually stretch vertically the strips to account for distortions at the outer and inner extremes. Spin unspin adjust, spin unspin adjust.

All the graphics had to be erased before doing this.

Repair all the borders. I also had to tweak individual land masses and continents by cutting them out and pasting them on new clear layers stretch and pull trial and error.

I believe the xcf file still has the graphics on a transparent layer over the map.

Feel free to do whatever you want to it and send me a pic of your results.

My motivation was the Gleason New Standard Map of 1892
https://www.amazon.com/Flat-Earth-Map-Gleasons-Rowbotham/dp/B01GQUW6PO?th=1

There was also a similar map used in WW 2 for people to track the progress of the war at home.

@Tottes1337 all versions (previous and current) of the BBR cards are also available for purchase here:

https://www.makeplayingcards.com/sell/yg-card-decks

If you want a free download, they are available on the discord (link should be above).

The best approach I’ve seen was a friend who cut his factories in half with a hacksaw. Large factories are majors, while the smaller, halved factories are minors.

I’ve got mine painted three different colors. Bought a lot of 50 for a few dollars from a vendor at Nashcon in May 2016.

Before Nashcon, I used red Monopoly hotels for the major factories and the green hotels for minor factories. I still like to use the green ones every now and again because I think they’re nifty.