Strategy Guide Global 1940

@barnee
Thanks for the feedback. Currently we do not have a printed technology sheet. We just write the name of the technologies on flash cards and place a national control markers and chips to keep track of progress.

As for them being too involved, for a first-time player we disagree. We played with a couple people that had never played Axis and Allies, but after a single game of G40 (keep in mind this already entails 8+ hours of practice) and they were all ready to implement our house rules on the next game.

Our house rules started as a question of how can we re-work the existing research rules to encourage the use of all out of box units.
It was never our goal to have unique technologies/units for each nation. The work done by @The-Captain and company is more complex than what we attempted to do, so kudos to them as it looks like they did a terrific job developing their house rule expansion. We should give their rules a try one day.

We play Afghanistan as a Strict Neutral. Only Russia in game can influence.
But we do have an event card if drawn the Afghanistan’s become hostile Guerillas ( Japan Influencers ) like they did in WW 2 and attacked UK/FEC/Indian ground troops.

Have 4 inf there.

@the-captain said in Axis & Allies Global 1940 2nd. House Rules Expansion:

…Some players in our play groups have used online TripleA since september 2020.

We have created a House Rules Basic Expansion - and I believe these rules are implemented in TripleA online. …

Would you ask them to post the file ? I couldn’t find it on map DLs. I’m reading through everything again and while edit will be required for some of the rules, I think it can get close to 90-95%. Maybe 80% edit free.

At any rate, I’m gonna take a crack at it.

@Steiner This board is so cool! I love the colors and how 3D it is. I’d love to see photos with all the units setup!

@baron-Münchhausen

I reviewed the 2 hits Battleship values to 2.5 multiplier factor.
It is an approximation but this is easier to use this value if you need to assess between two naval fleet during a live game with no AACalc allowed.

It is based on the very even (almost 50%-50% survival equilibrium ) combat between 1 Destroyer @2 and 1 Cruiser @3 against 1 Battleship, 2 hits @4.
http://calc.axisandallies.org/?mustland=0&abortratio=0&saveunits=0&strafeunits=0&aInf=&aArt=&aArm=&aFig=&aBom=&aTra=&aSub=&aDes=&aCru=&aCar=&aBat=1&adBat=&dInf=&dArt=&dArm=&dFig=&dBom=&dTra=&dSub=&dDes=1&dCru=1&dCar=&dBat=&ddBat=&ool_att=Bat-Inf-Art-AArt-Arm-Sub-SSub-Des-Fig-JFig-Cru-Bom-HBom-Car-dBat-Tra&ool_def=Bat-Inf-Art-AArt-Arm-Bom-HBom-Sub-SSub-Des-Car-Cru-Fig-JFig-dBat-Tra&battle=Run&rounds=&reps=10000&luck=pure&ruleset=AA1942&territory=&round=1&pbem=

1 Destroyer @2 and 1 Cruiser @3
5 pips * 2 hits = 10 pips*hits

1 Battleship, 2 hits @4.
4 pips * 1 BB worth 2.5 hits = 10 pips*hits

Hi Erocco,
these numbers are based on a formula found during Classic time by Dauvio Vann and his friends, then improved and adjusted to better fit the need of Second Edition units. Here is one link in House Rule:
http://www.axisandallies.org/forums/index.php?topic=40346.msg1684954#msg1684954

Below, you get the whole formula and a short explanation:

@Baron:

@Dauvio:

It came to my attention that one of my formulas are already out there that I discovered 30 years ago.
http://www.axisandallies.org/forums/index.php?action=profile;u=185969 has also discovered the formula P^2*N=S
And just for fun you can try these formulas also. S/P^2=N. √(S/N)=P
P=POINTS
N=NUMBER OF UNITS
S=STRENGTH OF ONE KIND OF UNITS IN A TERRITORY
This formula should replace the punch formula. It is much better then the punch formula.

Now the next formula is (P100)/(C^26)=S
P=POINTS
C=COST
S=STRENGTH OF THE UNIT BASED ON COST
With this formula you can also price units according to their strength. √((P100)/(S6))=C
This formula is for points. (S*(C^2*6))/100=P

For better results for some of these formulas, have all your units cost ten times then what they are. These are some of the VANN FORMULAS I came up 30 years ago.

If you have any questions about these formulas, please ask.

I found how you can get the main part of Vann formula or Baron-Larrymarx according to a specific unit as benchmark.

I took the Fighter A3 D4 C10 and I wanted to convert into Tank A3 D3 C6 as benchmark (Baron-Larrymarx formula).

Then I saw what I did.

Power (of attacking Fighter): A3 * C6 (cost of Tank)/C10 (cost of Fg) * 1 Hit Point C6 (cost of Tank)/C10 (cost of Fg) = 1.08
You can reduce this equation because (cost of Tank)(cost of Tank)/ (cost of Fg)*(cost of Fg) is same to
(cost of Tank) IPCs^2 / (cost of Fg) IPCs^2 and give a simple ratio.

C6^2*A3/C10^2 = 1.08
36 squared IPCs 3 Power * 1 Hit /100 squared IPCs = 1.08 PowerHit Point

This explained what is hidden in Baron-Larrymarx formula:
Offence or defence strength factor= 36*Power/Cost^2.

The whole Enigma formula is
Refence unit Cost^2Power of the actual unit1 HP/Cost of the actual unit^2

So, the Basic offence or defence strength factor result (1.08, in this case) is express in Power*Hit Point
1^2*Power (of a given unit)*1 hit/Cost (of this same given unit)^2

And this formula can be adapt according to any benchmark, for instance a 1 IPC unit:
131 hit/10^2 = 0.300

And this is a very small number. That’s why Vann formula:
Strength= (Power100)/(Cost^26)

add an arbitrary 1001/6= 16.667…
So, 16.667131 hit/10^2 = 0.5
And this would provide the Fighter strength attack factor based on an hypothetical benchmark unit of √16.667 = 4.0825 IPCs.
A 5 IPCs revised Tank in Vann formula gives a Strength : 16.66731 hit/5^2 = 2.00 powerhit

Can you elaborate on the ship calculations?

Destroyer strength: .30144/8^2  = 0.675
Cruiser    strength: .60144/12^2= 0.600
Battleship strength: .701442.618/20^2 = 0.660

These numbers means that Destroyer is the most optimized unit for combat to buy for each IPC invested, then it is battleship and finally Cruiser.
Said otherwise, Cruiser is sub-optimal for the cost.
3 DDs C8 A3 D3 (A9 D9, 3 hits) will be stronger than 2 Cruisers C12 A6 D6 (A12 D12, 2 hits) if you can use a Battlecalc to test D10-sided values.

From stronger to weaker for 120 IPCs basis:
15 DDs A3 D3 (A45 D45)
6 BBs A7 D7 (A42 D42)
10 CAs A6 D6 (A60 D60)

I’m using a house rule from an expansion set for the Global War 1936-1945. The rules didn’t translate very well to the A&A Global 40 game so I wrote some of my own. I have a video which will explain the rule that I will give you a link for. I also made a chart to use the tokens that you get with the set.I’ll provide a link to download the chart if you are interested in using this rule. The file is a re-writeable WORD file so you can change the rules to whatever you want them to be.It only cost me about 6 bucks to have the file printed on both sides and laminated.

Video;
https://www.youtube.com/watch?v=pO8gcDu6Pw4&feature=youtu.be
Chart;
http://www.mediafire.com/file/ys92hu0h082u0zh/American+Minorities+at+War+G+40.docx

@Charles-de-Gaulle

I noticed that you don’t allow the US to activate Brazil when neutral in another game (your blog). Would you say that applies to your rules as well? Thank you!