Global 1940 Basic Expansion

@FranceNeedsMorePower

That’s a better idea, especially since Japan is usually somewhat stretched to the limits on their declaration of war on the US.

@crockett36

No thank you, I don’t have the time. So you’re reducing the IPC value of Japan whilst giving fixed bonuses? Hmm, that does limit Japan’s options and would definitely be a slight nerf.

For players who have questions to the Game Mechanisms of the G40 HRE game, we draw attention to the fact that this thread explains what is “Behind the Scenes”.

See the top of the first post in this thread for further information.

We’ll gradually add more Information & Explanations about the remaining Units & Rules in the G40 HRE rulebook.

@timothy-gengarella all the forts and coastal guns in the zone are lost if you lose the territory

Hi @nishav

I use Factory Limited from the Redesign Thread. I find them to work well.

“FactoryLimited” Air and Naval Bases now cost 12. All captured and newly constructed Minor Factories may only produce Artillery, AAguns, Armor, Mech Infantry, Mobile Infantry, Marines, Elite and Infantry. If a NB is present you may also build Subs, Transports, Escort Carriers and Destroyers. If an AB is present you may also build Fighters and Tac Bombers.

ABs are required to build Fighters, Tac Bombers, Bombers and Air Transports. Bombers and Air Transports may only be built in Factories on originally owned Territories that also have an AB. In addition, Bombers and Air Transports may not be built in the following territories: Kwangtung, Egypt, Norway, Alaska, West India and Korea. May not build at an AB with 3 or more damage.

NBs are required to build all Naval Units. BBs, CVs and CAs may only be built in Territories with originally owned starting Factories. These Territories must also have a NB (Need not be original NB). May not build at a NB with 3 or more damage.

So similar to what you’ve suggested. Basically the Big Guns can only be built in original major factories.

Hi Erocco,
these numbers are based on a formula found during Classic time by Dauvio Vann and his friends, then improved and adjusted to better fit the need of Second Edition units. Here is one link in House Rule:
http://www.axisandallies.org/forums/index.php?topic=40346.msg1684954#msg1684954

Below, you get the whole formula and a short explanation:

@Baron:

@Dauvio:

It came to my attention that one of my formulas are already out there that I discovered 30 years ago.
http://www.axisandallies.org/forums/index.php?action=profile;u=185969 has also discovered the formula P^2*N=S
And just for fun you can try these formulas also. S/P^2=N. √(S/N)=P
P=POINTS
N=NUMBER OF UNITS
S=STRENGTH OF ONE KIND OF UNITS IN A TERRITORY
This formula should replace the punch formula. It is much better then the punch formula.

Now the next formula is (P100)/(C^26)=S
P=POINTS
C=COST
S=STRENGTH OF THE UNIT BASED ON COST
With this formula you can also price units according to their strength. √((P100)/(S6))=C
This formula is for points. (S*(C^2*6))/100=P

For better results for some of these formulas, have all your units cost ten times then what they are. These are some of the VANN FORMULAS I came up 30 years ago.

If you have any questions about these formulas, please ask.

I found how you can get the main part of Vann formula or Baron-Larrymarx according to a specific unit as benchmark.

I took the Fighter A3 D4 C10 and I wanted to convert into Tank A3 D3 C6 as benchmark (Baron-Larrymarx formula).

Then I saw what I did.

Power (of attacking Fighter): A3 * C6 (cost of Tank)/C10 (cost of Fg) * 1 Hit Point C6 (cost of Tank)/C10 (cost of Fg) = 1.08
You can reduce this equation because (cost of Tank)(cost of Tank)/ (cost of Fg)*(cost of Fg) is same to
(cost of Tank) IPCs^2 / (cost of Fg) IPCs^2 and give a simple ratio.

C6^2*A3/C10^2 = 1.08
36 squared IPCs 3 Power * 1 Hit /100 squared IPCs = 1.08 PowerHit Point

This explained what is hidden in Baron-Larrymarx formula:
Offence or defence strength factor= 36*Power/Cost^2.

The whole Enigma formula is
Refence unit Cost^2Power of the actual unit1 HP/Cost of the actual unit^2

So, the Basic offence or defence strength factor result (1.08, in this case) is express in Power*Hit Point
1^2*Power (of a given unit)*1 hit/Cost (of this same given unit)^2

And this formula can be adapt according to any benchmark, for instance a 1 IPC unit:
131 hit/10^2 = 0.300

And this is a very small number. That’s why Vann formula:
Strength= (Power100)/(Cost^26)

add an arbitrary 1001/6= 16.667…
So, 16.667131 hit/10^2 = 0.5
And this would provide the Fighter strength attack factor based on an hypothetical benchmark unit of √16.667 = 4.0825 IPCs.
A 5 IPCs revised Tank in Vann formula gives a Strength : 16.66731 hit/5^2 = 2.00 powerhit

Can you elaborate on the ship calculations?

Destroyer strength: .30144/8^2  = 0.675
Cruiser    strength: .60144/12^2= 0.600
Battleship strength: .701442.618/20^2 = 0.660

These numbers means that Destroyer is the most optimized unit for combat to buy for each IPC invested, then it is battleship and finally Cruiser.
Said otherwise, Cruiser is sub-optimal for the cost.
3 DDs C8 A3 D3 (A9 D9, 3 hits) will be stronger than 2 Cruisers C12 A6 D6 (A12 D12, 2 hits) if you can use a Battlecalc to test D10-sided values.

From stronger to weaker for 120 IPCs basis:
15 DDs A3 D3 (A45 D45)
6 BBs A7 D7 (A42 D42)
10 CAs A6 D6 (A60 D60)

https://www.youtube.com/watch?v=LQUXuQ6Zd9w

I recently went back to my older games and incorporated the newer pieces into them.  I only went as far back as Revised.  At first I thought it would simply be a matter of altering the setup some but found a few more problems:
1 - In the older games, Destroyers were 3-3-2-12, same as Cruisers are now.  Also, Aircraft Carriers had an attack of 1, now they have no attack value.  So basically, you have to bring the costs back to the older games and you have to use the 1940 battle boards.
2 - You can’t use air or naval bases in the older games.  Especially in Revised because there are a lot less sea zones.  For example, with a naval base, Japan and W USA are one move away from each other.
3 - ICs and build limits also present a problem.  In the older games, you simply have ICs and their build limit is based on the IPC value of the territory they are on.  I don’t know how to incorporate Major and Minor ICs into the older games.  I simply used the new unit values with the old IC rules.

Well, I hope this helps you.  If you would like my setup changes, let me know and I can post them for you.