Global 1943 Expansion, Revised

@Sam87
Sam, we have a group that plays in Fairfax County, next meeting is this Saturday, November 15. We have a sub-group that is planning to play Bloodbath on November 29 in Woodbridge VA. If you are interested I can send you directions.

Jonathan Rost / jonkrost@comcast.net

Re: https://www.axisandallies.org/forums/topic/37319/canada-s-distinct-ownership-icons

We did create Canada as a distinct power and the extra ally does create imbalance- we took the money from UK so they are slow to do much. But my son was geeked up to order some UK troops and paint them cherry red.
We haven’t quite found a counter balance for the axis. Maybe we shall try Vichy France.
I lose more than win but my kid knows his ww2 history and world geography pretty well, so…

Yes I agree that more VCs needed in PTO and Japan should have to work to get that 1 more VC in the PTO. I do have a VC Capital in Manchuria for my 40 game but with not having 18 inf in area it doesn�t seem to get pressured much.
Singapore is out of the question due to Japan being so strong by islands from G40 game reports. Got to make Japan earn it. Just some thoughts.

Hi Erocco,
these numbers are based on a formula found during Classic time by Dauvio Vann and his friends, then improved and adjusted to better fit the need of Second Edition units. Here is one link in House Rule:
http://www.axisandallies.org/forums/index.php?topic=40346.msg1684954#msg1684954

Below, you get the whole formula and a short explanation:

@Baron:

@Dauvio:

It came to my attention that one of my formulas are already out there that I discovered 30 years ago.
http://www.axisandallies.org/forums/index.php?action=profile;u=185969 has also discovered the formula P^2*N=S
And just for fun you can try these formulas also. S/P^2=N. √(S/N)=P
P=POINTS
N=NUMBER OF UNITS
S=STRENGTH OF ONE KIND OF UNITS IN A TERRITORY
This formula should replace the punch formula. It is much better then the punch formula.

Now the next formula is (P100)/(C^26)=S
P=POINTS
C=COST
S=STRENGTH OF THE UNIT BASED ON COST
With this formula you can also price units according to their strength. √((P100)/(S6))=C
This formula is for points. (S*(C^2*6))/100=P

For better results for some of these formulas, have all your units cost ten times then what they are. These are some of the VANN FORMULAS I came up 30 years ago.

If you have any questions about these formulas, please ask.

I found how you can get the main part of Vann formula or Baron-Larrymarx according to a specific unit as benchmark.

I took the Fighter A3 D4 C10 and I wanted to convert into Tank A3 D3 C6 as benchmark (Baron-Larrymarx formula).

Then I saw what I did.

Power (of attacking Fighter): A3 * C6 (cost of Tank)/C10 (cost of Fg) * 1 Hit Point C6 (cost of Tank)/C10 (cost of Fg) = 1.08
You can reduce this equation because (cost of Tank)(cost of Tank)/ (cost of Fg)*(cost of Fg) is same to
(cost of Tank) IPCs^2 / (cost of Fg) IPCs^2 and give a simple ratio.

C6^2*A3/C10^2 = 1.08
36 squared IPCs 3 Power * 1 Hit /100 squared IPCs = 1.08 PowerHit Point

This explained what is hidden in Baron-Larrymarx formula:
Offence or defence strength factor= 36*Power/Cost^2.

The whole Enigma formula is
Refence unit Cost^2Power of the actual unit1 HP/Cost of the actual unit^2

So, the Basic offence or defence strength factor result (1.08, in this case) is express in Power*Hit Point
1^2*Power (of a given unit)*1 hit/Cost (of this same given unit)^2

And this formula can be adapt according to any benchmark, for instance a 1 IPC unit:
131 hit/10^2 = 0.300

And this is a very small number. That’s why Vann formula:
Strength= (Power100)/(Cost^26)

add an arbitrary 1001/6= 16.667…
So, 16.667131 hit/10^2 = 0.5
And this would provide the Fighter strength attack factor based on an hypothetical benchmark unit of √16.667 = 4.0825 IPCs.
A 5 IPCs revised Tank in Vann formula gives a Strength : 16.66731 hit/5^2 = 2.00 powerhit

Can you elaborate on the ship calculations?

Destroyer strength: .30144/8^2  = 0.675
Cruiser    strength: .60144/12^2= 0.600
Battleship strength: .701442.618/20^2 = 0.660

These numbers means that Destroyer is the most optimized unit for combat to buy for each IPC invested, then it is battleship and finally Cruiser.
Said otherwise, Cruiser is sub-optimal for the cost.
3 DDs C8 A3 D3 (A9 D9, 3 hits) will be stronger than 2 Cruisers C12 A6 D6 (A12 D12, 2 hits) if you can use a Battlecalc to test D10-sided values.

From stronger to weaker for 120 IPCs basis:
15 DDs A3 D3 (A45 D45)
6 BBs A7 D7 (A42 D42)
10 CAs A6 D6 (A60 D60)

Hi all!
I made this new research table breakthrough for A&A Global, cause i think the original ones was too weak. Stuff like War Bonds or Improved Shipyards are strange concepts imho (spend money to recieve money back overtime ? :? ). Those rules can be used of course on every A&A game, not only Global 1940.

I just want to share this new research with you all, and listening at your feedbacks, you veterans!  :-D
Please let me know what do you think!
Enjoy!  :lol:

(N.B.: 1,2,3 Ground and 1,5,6 Air/Naval are the same of standard rules)

NEW RESEARCH AND DEVELOPMENT RULES BY ZAIBACH

Research and Development sequence
1. Boost research
2. Roll research dice
3. Roll breakthrough dice
4. Invest in research

1. If you don’t have any research token in your reserve, go directly on step 4. If you have at least one research token, you can choose to boost research for that turn. If you do so, spend 5 IPCs: only for that turn the research is boosted.
2. Roll a die for each research token in your reserve, +1 die if you boost the research for that turn. If you score at least one “1”, you made a breakthrough: remove all research tokens from your reserve and go to step 3. If not, skip step 3 and go to step 4.
3. Choose one table and roll a dice to determine the research you’ve gotten.
4. You can choose either to invest or do not invest in research. If you do not invest, you lost all the research tokens in your reserve. If you do invest, you spend 5 IPCs and add one research token in your reserve.

Example:

On first turn Japan starts with 0 research token and so go directly on step 4. He decides to invest in research, spending 5 IPCs and taking one research token. On second turn Japan decides to boost his research, spending 5 IPCs. He then roll two dice, one for the token and one for the boost. He scores 2 and 5, no breakthrough. He then decides to continue investing in research, spending 5 IPCs, acquiring a second research token. On third turn Japan decides to not boost his research, and then roll two dice for the two tokens he has. He scores 6 and 1, breakthrough! He remove all the tokens and got a research. Then he decide to continue investing in research, spending 5 IPCs. He now has one research token in reserve.

GROUND TABLE

1. Advanced Artillery. Each of your artillery units can now provide greater support. One artillery unit can support up to 2 infantry and/or mechanized infantry units per attack. Up to 2 infantry and/or mechanized infantry units when coupled with 1 artillery unit have attack values of 2.
2. Rockets. Your air bases can now launch rockets. During the Strategic and Tactical Bombing Raids step of your Conduct Combat phase each turn, each of your operative air bases can make a single rocket attack against an enemy industrial complex, air base, or naval base within 4 spaces of it. This attack does one die roll of damage to that facility. Rockets may not be fired over neutral territories.
3. Paratroopers. Up to 2 of your infantry units in each territory with an air base can be moved to an enemy controlled territory 3 or fewer spaces away that is being attacked by your land units from adjacent territories and/or by amphibious assault. When moving, paratroopers must obey the same restrictions that air units do. If the territory being attacked has AAA (antiaircraft artillery) units, the paratrooper infantry units are subject to antiaircraft fire in the same way as air units. If attacking along with land units from adjacent territories, paratroopers may retreat as normal.
4. Improved Factory. Each of your industrial complexes can now produce additional units beyond their normal production ability. Major industrial complexes can mobilize up to 12 units, and minor ones can mobilize up to 4 units. Also, your industrial complexes have now built-in Artillery. Major industrial complexes have 2 built-in Artilleries and minor ones have 1 built-in Artillery. You can use this Artilleries in battle only for defence. This special Artilleries are added on the battle board but can’t never be taken as a casuality. If in any round, after remove casualities, there are no other defence units except for built-in Artilleries, they are immediatly removed. In any case, at the end of the battle, remove them from the battleboard.
5. Accurated Bombardment. Your Artilleries can now be parried with Fighters. This improve the Artillery both Attack and Defence by 1 (from 2 to 3). A single Fighter can both be parried with an Artillery and a Tactical Bomber in the same moment.
6. Fast Tanks. Only on the first cycle of combat, your tanks can support infantry/mechanized infantry (just like artilleries).

NAVAL/AIR TABLE

1. Super Submarines. The attack value of your submarines is now 3 instead of 2.
2. Antiaircraft Cruisers. Your Cruisers have now a built-in AAA (antiaircraft artillery).
3. Torpedo Bombers. Your Tactical Bombers are now equipped with a single Torpedo. Only during the first round of a Naval Combat, both Defending and Attacking Torpedo Bombers roll an extra dice called “Torpedo”. Those dices have attack and defence value of 2 (3 if coupled with a fighter). Enemy aircrafts cannot be hitted by “Torpedo” dices. When you have to allocate hits, first of all allocate “Torpedo” dices, and then proceeds with the others.
4. Dreadnought Battleships. Your Battleships now have long range cannons. Before a naval battle begins (even before AAA phase), there is a single special round fight. In this special round only Battleships attack and defence with a value of 2, and submarines and aircrafts cannot be taken as casualities. For each Fighter on your side you can increase one Battleship attack and defence to 3. Casualities are immediatly removed and cannot take place in the normal battle.
5. Long-Range Aircraft. All of your air unit’s ranges are increased by one space.
6. Heavy Bombers. Your strategic bombers are now heavy bombers. When attacking, whether in a battle or a strategic bombing raid, roll two dice for each bomber and select the best result.

Torpedo Bombers, Example:
A Japanese Aircraft Carrier and an American one are standing in the pacific ocean. They have both one Fighter and one Torpedo Bomber.

During the Japanese turn, the Japanese attack with his Fighter and his Torpedo Bomber on the sea zone with the American Aircraft Carrier. The Japanese has 1 dice of 3 for the Fighter, 1 dice of 4 for the Tactical Bomber, and 1 more dice “Torpedo” of 3.
He rolls and obtains 6, 4, 2 respectively, inflicting 1 normal hit and 1 “Torpedo” hit.

The American has 1 dice of 2 for the Aircraft Carrier, 1 dice of 3 for the Torpedo Bomber, and 1 dice of 4 for the Fighter. His “Torpedo” dice is lost, because there aren’t ships on Japanese army.
He rolls and obtains 5, 5, 3 respectively, inflicting 1 normal hit.

The Japanese assign the hit to his Fighter, which is destroyed.
The American first of all have to assign the “Torpedo” hit, he has to assign it to the Aircraft Carrier, because it has to be assigned on ships, which is now damaged. Then he assign the normal hit at his Torpedo Bomber, which is destroyed.

At this point the Japanese decide to pull back with his Torpedo Bomber, returning on his Aircraft Carrier.
The American Fighter cannot land in the Aircraft Carrier, because it’s damaged, and cannot also land in any place, so it’s destroyed.

With this attack the Japanese, losing only 1 Fighter, has inflicted a devastating blow to the American fleet, destroying two Aircrafts and damaging an Aircraft Carrier!

Preface: I’m somewhat new here, so I’m sure there are other house rules for this topic that I’m not aware of, but this is my attempt at what makes the most sense to me.

Vichy France and Free France House Rules
(To be used with appropriate markers from Historicalboardgaming.com, http://www.historicalboardgaming.com/Custom-Roundel–Free-Vichy-French_p_369.html)

Capitulation and Armistice

If France and Normandy fall to the Axis, immediately remove any units (Allied or otherwise) from Southern France and place a Vichy marker on the territory. Place a Vichy marker on the IPC production chart on “3” (the value of Southern France). Place 4 alternate colored infantry units (old versions of Germans work well) on Southern France and an extra Minor Industrial Complex in Germany* (As part of France’s capitulation, Germany took over 2 million French soldiers as laborers). Vichy France is controlled by the German player.

*I know technically, no more than one IC can be in a territory, and practically, Germany will not produce 13 units in the same zone, so I’m open to suggestions on how to represent the French laborers.

The Colonies and the Free French Movement

At the creation of the Vichy France government, roll a die for each French territory on the map.

An “even” result means the territory joins De Gaulle’s “Free French” movement. Place a Free French marker on the territory and on the IPC production chart on the value of the territory. Move the IPC marker up for any additional territories that join the movement.

An “odd” result means the territory remains loyal to the Vichy French government. Replace any French Units with equivalent alternate colored units. Move Vichy’s IPC marker up for each territory that joins.

Roll for each French fleet on the map, and replace all units in a fleet if they choose the Vichy government.

The units in England remain Free French.

Every turn, Free France may convince one unoccupied Vichy colony to join their movement. Roll as before, and place a marker if the territory turns.

Special Rules

When a territory is “liberated” by the Allies, it becomes Free French.

When a territory is “liberated” by the Axis, it can either become Vichy or be occupied.

Vichy France may collect IPC income, but can only purchase Infantry, Anti-Air, transports, and destroyers. It must also give 1D6 of its IPC income to Germany every turn (Germany required the Vichy government to pay for its troops in the Northern Occupied Zone).

Free France may collect IPC income, but may not purchase or place any units until an Industrial Complex is built in one of its territories.

Vichy France may not move units into any territory in Europe. It may move units out of Europe via transports, and it may attack and move normally in the colonies.
Axis troops may move through Vichy France and its colonies freely.

Collapse of the Vichy Government

If Vichy is attacked by the Allies directly, it will defend as if it was a member of the Axis. If, however, Normandy and France are taken by the Allies, all Vichy units in Southern France disband, and control passes to whatever Axis units remain in the territory. If and when Southern France falls to the Allies, all Vichy units abroad disband and control of all colonies passes to the Free French.