3D Printing Files

@cwo-marc
And when you consider how all the other units, tanks, fighters, bombers, and infantry are all their own scales, having consistency in class seems to make the most sense. At least to me. Even if units are the same size in real life, as you said, its easier for non-historians/enthusiasts to pick up the game if unit type x is scale size x.
Maybe if this was just a naval game or a land war game, then all units could be the same scale. As 3D printing becomes more common, I was interested in hearing how others approached this.
Thanks

Any discounted coupons that are current for printing Maps at Office Depot/Max?

I plan on printing some out from Siredblood’s link.  I watched his video and you can certainly do it that way.  My only concern with adhesive backed “stickers” is that with all the handling of game pieces, I can imagine that the stickers begin to peel up after a while. If you’re going to use the adhesive backed stickers, might I recommend to apply thin CA glue around the outside edge of the sticker after you’ve burnished it down on the carrier deck.  You can get some thin CA at your local hobby shop where they sell RC planes, or just order it online.  Because it is literally as thin as water, you’ll need to apply it with some sort of makeshift precision applicator.  But after that, you won’t have to deal with annoying stickers that don’t want to stay down tight.

Also, if you use a glossy type sticker paper, after you’ve applied it and the carrier is “all done”, spray the entire piece with a light coat of Testor’s Dullcote spray laquer.  You’ll get rid of the sheen both on the plastic and from the glossy paper. All the colors will “blend” together and the piece will look much better.  :wink:

Make up your own House Rule……here are some ideas

Recruitment Center (this one just happens to be a Nazi)
-The ability to build Reg. Infantry at non-factory territories
-Territories must have a value of (1)
-Only (1) Center per Territory
-Cost: 9
-Movement: N/A
-Build of (1) Reg. Infantry
-Can be Burned, or removed round before capture
-Can be Captured and be used
-Can be Bomb and unable to produce Infantry till repaired.  Cost of Repair is (3)IPC

These will be on my Shapeways Store Soon
https://www.shapeways.com/shops/war-game-miniature

IMG_20170410_205109.jpg
IMG_20170410_205127.jpg

@Private:

It’s the same map Ryuzaki - in terms of territories, szs, etc. Only the artwork is different.

Cheers
PP

I’m aware, sorry for a lack of clarity, but I need the artwork too.