@bratcher You must right click the transport, then right click the units you want to load, then right click the sea zone you want the transports to move to, then right click the territory you want to unload units into. Hope it works for you.
They Fixed Transports in the New Patch
-
@Magro Please provide a screenshot and/or detailed step by step what you’re doing.
-
@JuliusBorisovBeamdog I followed your list aboce with rightclick-left lcik etc. Just not playing this until it is updated again.
-
@Magro Thing is, it’s working in my game. I suspect you’re not doing something that is required but I can’t help without the details.
-
transports are still effed.
If you wanna start in one SZ ; load a single unit ; move one or two steps ; load a second unit ; then offload both of these into a third territory ; you must ALWAYS without fault follow this Sequence:- Click on the Transport you wanna lose with leftclick, make sure it is properly highlighted as selected. 2) RIGHT CLICK on the first unit you wanna onload 3) RIGHT CLICK move the transport into the SZ you want it next ; 4) RIGHT CLICK onto the next unit you want to LOAD ; // THIS IS IMPORTANT // do not move into another seazone and try to click onto an adjecent Land territory, BUT!! 5) Right Click onto the Land Territory you want to conduct the Naval Invasion towards immediately, not taking any intermediary steps in the Seazone.
It will never work if you try to move the land unit by clicking it and moving it onto the transport
it will also never work if you have several transport in a SZ and you try to onload all of them, then move all of them, onload some new units, and then offload them - you must ALWAYS conduct this sequence exactly for each single individual transport; no excuses.Its Unplayable!
-
@teferi Please edit out the foul language from your post. You’re borderline, if not in full, rules violation.
-
@djensen you mean the wurd “f***ed” in the first sentence? Replaced it.
What else do I need to remove / replace :) I do want to comply with code of conduct and Forum Rules :)((Edit:)) I cannot rectify this Post, when trying to edit the post I get this error Message: You are only allowed to edit posts for 3600 second(s) after posting
Please advise what action I need take to be in compliance :)
-
@teferi I updated it for you just changed it to
effed
:shrug: -
@djensen thank you very much :)
-
We’ve put together a quick guide explaining Transport Rules and UI for Axis & Allies 1942 Online.
https://steamcommunity.com/sharedfiles/filedetails/?id=2384347603
-
@juliusborisovbeamdog said in They Fixed Transports in the New Patch:
We’ve put together a quick guide explaining Transport Rules and UI for Axis & Allies 1942 Online.
https://steamcommunity.com/sharedfiles/filedetails/?id=2384347603
I got this as a reply onto my steam review, too!
I will say this: That Guide is helpful.But writing or filming a Guide instead of FIXING the problem is not professional, it is at best a band aid for an annoying problem which has been known SINCE DAY ONE
If this Developer Studio were my Company, I would be firing people left right and center.