Axis & Allies storage. Post yours!

Expanding on the amazing set of Custom National Advantages Cards that “Dagon81” created along with an “Anniversary Upgraded version”, at the:
https://www.axisandallies.org/forums/post/1235815
I’ve created a few extra sets for all editions, by editing these cards in my computer. These extra cards as well as many initials, are based mainly on the Axis & Allies Revised Rulebook but also of the other editions, and include in addition to their National Advantages and Technologies. They appear in my related comment archives:
The Cards Book (pdf):
https://www.axisandallies.org/forums/post/1618056
The Extra Cards Sets (jpg):
https://www.axisandallies.org/forums/post/1618116
A sample of them is shown below:
AA 50 Upgrade Combo p.33.jpg

For more card sets for National Objectives and how to print, see the post below:
https://www.axisandallies.org/forums/post/1635724

I can’t understand German, but I know what your doing, and that is cool, and will make it easier to keep track of. :-)

Super job on this spreadsheet.

Cheers!

John

I’m not aware of such a blank outline map existing.  Your best option might be to cover the game map with several taped-together sheets of clear acetate (the kind used for purposes like overheard projection) and trace the borders with a felt pen to produce a blank outline.  You’d then have various options for transfering this outline to the wood surface.  A low-tech method would be to cover the wood surface with sheets of carbon paper (if you can still find any, since it’s gone out of style), place your acetate outline over the carbon paper, then trace over the borders with a hard pencil.  Alternately, you could scan or digitally photograph your acetate outline and use that as the printing file you mentioned.

@mentok27:

Man now I wish I had some new stuff to share. But I didn’t finish any pieces  I started recently…. I did do quite a few Hungarian pieces but I was waiting till I did the Air Force as wel before I snapped a pic.

I lost a lot of time recently on the battlefield 1 beta.

No problem, you have inspired me to get back to painting. Due to health reasons, I haven’t done anything in a year, but I’m about to least, do some small jobs, here and there.

Can’t wait to see your Hungarian pieces. :-)

Cheers,

John

Hello everyone,

I have been getting some requests for the air base & naval base icons I used for my custom map, so here they are…

I’ve updated the approximates sizes/scales for some basic and alternate units.  Keep in mind that many classes of ship and aircraft, though in the same class, varied in size so my sizes will be off on some units.  If your like me I want to be able to visually distinguish between units quickly so keeping classes similar in size I find works the best. Below is my guide/attempt to standardize my pieces where they are relatively the same size for their respective class.  I’ve added some alternative classes that I use in my games and ties in some of the alternate pieces that HBG is putting out.  If you need something scaled and not sure how to do it let me know and I’ll do my best to help.

Carrier 6.5 cm 1/3700
Light/Escort Carrier 5cm 1/3100
Battleship 6 cm 1/4000
Cruiser 5.5 cm 1/3700
Light Cruiser 5 cm 1/3400
Destroyer 4.8 cm 1/2400

(cm is for the wingspan)
Heavy Bomber 4.7 cm 1/700
Medium Bomber 3.5 cm 1/600
Light Bomber 1.7 cm 1/600
Heavy Fighter (Twin engine) 2.8 cm 1/600
Fighter 2.2 cm 1/500
Light Fighter 1.7 cm 1/600
Dive/Torpedo Bomber 3 cm 1/500

This is really nice. It’s good to see someone put so much effort into the game, no matter what the version.

It also makes me want a three season room.

this first pic is what i had been using, i manually printed things out in one page sections via “print selection” command and pieced them all together, and laminated them with clear packing tape. Ultimately it proved to be a little larger than the default gameboard like I wanted, but still sloppy looking and with some bumps here and there which complicated unit placement due to tipping or sliding:

it was larger enough than the default board that things in europe didn’t seem so crowded anymore, but shoddy looking still, and that can wear on the nerves.

So I finally said enough is enough, and took the map pdf file on a jump drive down to minuteman press in London Kentucky and had them blow it up and laminate it….it costed $118 IPCs U.S. Dollars.

Its 2 foot by 3 foot, and gives us plenty of room for stacks. I got tired of kenny’s fat fingers knocking over my german stacks and scattering them across europe…he says my money was wasted because “those damn germans were going across europe anyway I just helped you out is all”.

but here it is: