Some more of my stuff and modifications.

Here’s a couple tweaks, since I can hear the imagined rebuke of Charles de Gaulle ringing in my ears, “France is no Joke!!” This artwork practically begs for an equally humorous House Rule:

Glorieuse France
If France ever has 3 Aircraft Carriers in play, the game is over immediately and France (not the Allies) shall be declared the sole winner.

Full file with humorless French Carriers:
https://www.mediafire.com/file/uw04vq6x0te4trs/carrier_decals_FranceIsNoJoke.pdf/file

carrier_decals_HumorlessFrench.png

Just the “Humorless French” Carrier Decal (600 DPI Print):

France_Carrier_Decal.png

@The-Captain
I used 3mm thumb nuts drilled out to fit 3mm acrylic rods. I used a number of 3d printed jigs for cutting the rods, assembly of the stands and gluing the magnets. If I remember later I’ll attached some pictures of the jigs/stands

@chrisbump86

I think @ScottMcCullar created a lot of that board in Adobe Illustrator. I am about to undertake a similar project for my Anniversary Game setup. Happy to share when I am done.

@ScottMcCullar Where did you get the foldable backing ?

Cheers

Pvt. Griff

Here are the modules from the “G40 Lite” release that can be used with any AA50 map. They have also been posted to the first post in this thread.

Jehol (1) split off from Manchuria (3)

Jehol.png

“Impassible” text added below Mongolia, Switzerland, Sahara, and Himalaya, which becomes important if playable Neutrals are used.

Impassibles.png

Playable IPC-ified Neutrals:
– Sweden (2)
– Turkey (2)
– Saudi Arabia (2)
– Spain (2)
– Afganistan (1)
– Northern South America (2)
– Peruvian Central [South America] (1)
– Argentina Chile (2)
– Angola (1)
– Mozambique (1)

IPC_Neutrals.png

@the-captain they are water slide decals.

IMG_7203.JPG
Hi all, here are the latest additions to the ever-growing “Affordable Armory” :)

In addition to beginning to print in Gray and Black as well as the original White, I’ve also newly designed an Anti-Aircraft Gun (similar to OOB), a Kriegsmarine Escort Ship (Type 39 Torpedo Boat), and I’m printing the Royal Navy Hunt-Class light Destroyers (original model by AntarcticFox on thingiverse) for the Allied side as well.

While I work on a few bigger things (Light Tanks, Escort Carriers, Rail Depots, Coastal Artillery…) there are also some new miscellaneous bits as well: Oil Drums, Naval/Landmines, “Czech Hedgehog” anti-tank obstacles, and Metal Bars/Ingots. Come take a look at www.Etsy.com/shop/NathanDetr0itDesigns!

@Midnight_Reaper
Anzac uses them. Had to make the tac. and lvl. bomber engine counts different, being that some in my group are not the most, let’s say “on the spot” when it comes to unit ID. Had to swap some navel units around for the same reason. Bristols went to the French.
Before I put 'ol Glorious away, I started tinkering and found that filing the bottom of the Mosquito engine nacelles even to the fuselage solved the issue.
Thanks mate.

I know this is quite old, but I would love an SVG file of the map at a decently high quality (high enough to distinguish roundels and text). If needed, you can email it to me.