Recommendations for 3D printers to print Axis and Allies pieces, and customizations?

@LebaneseWarlord said in Need advice for custom dice DIY:

I’ve recently bought 96 dice because I wanted to make custom hit/miss dice for Global 40. I bought these dice from amazon and they’re plain blank and white dice.

I don’t have a lot of experience with DIY projects but I have access to a lot of good tools so I’m looking for advice regarding techniques on how to mark and repaint the dice I bought.

For the marking, I was thinking about using a rotary tool to carve a little dot.

The real challenge is the painting. I looked a lot on internet and I can’t seem to find a technique for painting on plastic that everyone agrees on, but here’s what I have so far.

Wash the dice to remove any grease that could be on the surface Use very fine sandpaper or some sort of abrasive to remove the protective finish that is on the dice right now and offer a better surface for the new paint to stick Wash the dice again the remove the dust from the paint removal Apply one or a few (I’m not sure about this one, I’ll read what is suggested on the can) of primer Apply a few thin layer of the color I want on the dice Paint a white dot in the carving I made earlier with a fine brush Apply one or a few (not sure about this one either, something will be suggested on the can) of clear finish to protect the paint

Any correction or suggestion would be very welcome!

Guys use RIT dye for color. Go to Siredblood’s custom dice you tube video. Shows how he used a jig to spot hole dice and then dye them

@macdown343
Why don’t you use the existing map files or do you want to customrise territory’s ?

@Imperious-Leader said in Axis & Brollies : Action Cards and Event Cards:

you should set it up with card decks made at “Artscow” or something like it in terms of name. They are sold as long as you set up account and you will earn a bit of change

Also consider:
www.makeplayingcards.com was recently (2019) used successfully by siredblood to produce his “Blood Bath” A&A version card deck - at a resulting fair price for consumers

drivethrucards.com was recently (2018) used successfully by Young Grasshopper to produce his co-deck “Omaha” and “Utah” cards for A&A G’40 - at an absolute steal of a deal for consumers

If you have not already done so, please consider selling your deck(s) at either or both sites - I would love to see you get paid for your work.

I plan on printing some out from Siredblood’s link.  I watched his video and you can certainly do it that way.  My only concern with adhesive backed “stickers” is that with all the handling of game pieces, I can imagine that the stickers begin to peel up after a while. If you’re going to use the adhesive backed stickers, might I recommend to apply thin CA glue around the outside edge of the sticker after you’ve burnished it down on the carrier deck.  You can get some thin CA at your local hobby shop where they sell RC planes, or just order it online.  Because it is literally as thin as water, you’ll need to apply it with some sort of makeshift precision applicator.  But after that, you won’t have to deal with annoying stickers that don’t want to stay down tight.

Also, if you use a glossy type sticker paper, after you’ve applied it and the carrier is “all done”, spray the entire piece with a light coat of Testor’s Dullcote spray laquer.  You’ll get rid of the sheen both on the plastic and from the glossy paper. All the colors will “blend” together and the piece will look much better.  :wink:

@CWO:

@John:

Congratulations to you, and KNP! :-D

Hear hear!

Appreciate it Marc! :-)

Take the ideas from the thread in House rules about tech cards.

Also, make cards with various IPC values.

Present the logo here that will be shown on all backs.

Artscow is best resource

After building my AA50 table and a portable wargaming table, I think I’m tabled out (and let’s face it, I just don’t have any more room for tables in my already cramped household) but I did love making them.

After painting my entire AA50th set + a Spring 1942 set of pieces, I’d be more than willing to do more if the need arose.

Right now I’m more into Wargaming terrain and miniatures though.  There’s enough there to keep me pretty busy!

I have them formatted to avery .75 round labels. see house rules ( pieces and where to get them)