Recommendations for 3D printers to print Axis and Allies pieces, and customizations?

Expanding on the amazing set of Custom National Advantages Cards that “Dagon81” created along with an “Anniversary Upgraded version”, at the:
https://www.axisandallies.org/forums/post/1235815
I’ve created a few extra sets for all editions, by editing these cards in my computer. These extra cards as well as many initials, are based mainly on the Axis & Allies Revised Rulebook but also of the other editions, and include in addition to their National Advantages and Technologies. They appear in my related comment archives:
The Cards Book (pdf):
https://www.axisandallies.org/forums/post/1618056
The Extra Cards Sets (jpg):
https://www.axisandallies.org/forums/post/1618116
A sample of them is shown below:
AA 50 Upgrade Combo p.33.jpg

For more card sets for National Objectives and how to print, see the post below:
https://www.axisandallies.org/forums/post/1635724

@sweetchops27 Surprised that Senussi isn’t on here as an Ottoman-Aligned Territory (land area could be in-between Cyrenaica and Egypt) . If you don’t want to add more territories, you could very well replace Cyrenaica with it and make it north and south instead of west and east.

@bolasgod

Not sure if you triplea but “Global 40 House Rules” has a lot of options. Here’s a link to the “Redesign” thread which has a lot of the ideas:

https://www.axisandallies.org/forums/topic/26089/g40-redesign-currently-taking-suggestions/1609

Also oztea has some in his 42 mod here:

https://www.axisandallies.org/forums/topic/20575/oztea-s-1942-global-setup?page=1

I had to use multiple trays for some nations, but I managed to fit and organize all my pieces into the boxes!

What did you get? Where did you get them?
You mean value as in attack & defence?

No Trenacker. Just get a white primer and don’t forget to put on some sort of clear coat after to protect them.

The next group of infantry, will be, DESERT LIGHT INFANTYRY.

Until next time.

Cheers!

John

Sounds great!