First time painted game pieces for 3G40

@vodot Really useful, thanks a lot

Part 4: Starting the ships, adding decals to the tanks, skin tones on the soldiers

Today spent some time adding paint to the sprayed ships, including painting the water jettisons on the subs black (this was very tricky and ended up looking a little sloppy). Advice for painting the jettisons: toothpicks are not small enough! If you do use toothpicks, you’ll have to dab a dot of black for each tiny jettison.

The battleships were a bit easier, and painting the decks, bridge, and smoke stacks were all done in silver. I plan on adding the final grey coat last after the deck and stacks/bridge dry. I experimented with how to add the national emblem, and will probably opt for a white background with a red dot on the bow of the ship. In the future I may do that with the rear end of the ship.

I painted the tranny smoke stacks silver and added a white background for the emblem on the destroyers. All in all, the Japanese navy is coming along nicely.

The armor is pretty much done. I added a white flag to the front side of the armor and will be adding the red dots later. For the aircraft, I’ll be adding a red band around the rear part of the plane. I was debating between sky blue and red and may alternate just for some variety.

The soldiers got some skin! And I just want to say that adding the paint alone brings out the contours of their facial features in an excellent manner on their own. I may add a touch of black to certain areas of the face but that will be a last step. The next step will be panting their uniforms, rifles, and helmets.

After all this is done, I will be spray painting the japanese bombers white, the aircraft carrier black, and then will add the details to those. The Japanese are about 55% done all in all and I’m pleased with the results so far even if they do look a bit amateurish. Stay tuned.

IMG_6405.JPG IMG_6404.JPG IMG_6403.JPG IMG_6402.JPG

E6000 will glue anything.

Appreciate the comments. You must have been busy the last few days. Haven’t seen any of your work.

Are you and your friend painting anything, this week?

@Andy6049:

Thank you all for the information.  Hopefully, I will start my painting project soon.  Getting a new airbrush isn’t an option right now, but I will definitely keep it in mind for later.  The plastic brush I have works decent when its not being temperamental.

I will be experimenting with spray paint, at least for primer.

When I start to finish some some, I will post a new thread with all the information of how, what , when, where, I did to paint the pieces.  Hopefully, it will benefit someone to wants to do the same and be as inspirational as the amazing work already on this forum has been for me.

Can’t wait to see your work. I’m glad to see this part of the forums grow. It has been awesome seeing everyone’s work.

I hope to be painting again, soon, myself. Glad to have another member to the team. :-)

Cheers!

John

Thanks for the advice!  I will try a different primer.

Nice!

this first pic is what i had been using, i manually printed things out in one page sections via “print selection” command and pieced them all together, and laminated them with clear packing tape. Ultimately it proved to be a little larger than the default gameboard like I wanted, but still sloppy looking and with some bumps here and there which complicated unit placement due to tipping or sliding:

it was larger enough than the default board that things in europe didn’t seem so crowded anymore, but shoddy looking still, and that can wear on the nerves.

So I finally said enough is enough, and took the map pdf file on a jump drive down to minuteman press in London Kentucky and had them blow it up and laminate it….it costed $118 IPCs U.S. Dollars.

Its 2 foot by 3 foot, and gives us plenty of room for stacks. I got tired of kenny’s fat fingers knocking over my german stacks and scattering them across europe…he says my money was wasted because “those damn germans were going across europe anyway I just helped you out is all”.

but here it is: