AARHE: Phase 3: Revised NA's

I like this. Very simple. Very elegant. I’m going to have to borrow this for our next game. I’m going to make 8 Blue Allied Victory Tokens, 8 red Axis Victory Tokens and 1 Gold Victory Token.

@WILD:

@Imperious:

Well if you allow BB and CV to take 2 turns to build and pay half each turn, it makes alot of sense to buy cruisers. The 3 move is great, but not sure to give it a 4 MOVE if from a naval port.

I’m also experimenting with many more convoy zones (UK convoy routes) mostly in the Atlantic, around Africa, and the Med. I’m hoping that giving the cruiser 3 moves (4 from nb) allows the axis to use it as a convoy raider at times because it can out run (or keep pace) with the allies ships. Adding more convoy zones is also making German subs more viable as commerce raiders.

To Baron Munchhausen, yea escort or light carrier would probably be a better terms then support carrier. I’ve been using A0, D1, M2-3, C12-carries 1 plane.  You bring up a good point about many of these light carriers were built on cruiser hulls though. Being this is a new ship for me at a relatively low cost (12 IPCs) I think I will keep it with the standard move of 2-3 for now (to warrant the cruiser at 12 IPC as the only fast ship), but will probably take a 3-4 move light carrier for a spin at some point.

PS: I’m really liking the 2 turn capital ship builds, and it is making ship building pretty interesting.

I’m also thinking about limiting 2 turn capital ship builds to major ICs (exception of USA who’s minors will be majors at some point). You can drop a capital ship at one of your minor ICs, but it takes an extra turn for delivery (3 turns to build). This is basically to stop the US or Japan from building capital ships in remote places. I would allow the UK Pac, Anz, Canada etc to build capital ships at their minor ICs, but theoretically they pay for the ship, it is built in England and delivered to the minor IC over 3 turns (same concept for the other powers building at their minor ICs). I realize that you could make a point that any ship built at a minor IC should be +1 turn because most ship yards would be at in the home territory where the major IC is (looking at that too lol).

Adding CVL to Cruiser, both at M3-4, makes a way to depict the historical US Fast Task Force fleet in PTO.
I made a house rule for Convoy Raid. It works well with 1942.2 and AA50.
http://www.axisandallies.org/forums/index.php?topic=35687.msg1467061#msg1467061

@Black_Elk:

That’s a clean map Ryuzaki_Lawlie!

The color selection is ideal. Though the black impassibles still jump out at me

From a design standpoint the only things that catch my eye are the two round sea zones surrounding Japan and Hawaii.

It feel like you need one in the Atlantic to balance things out aesthetically. Have you considered the possibility of one surrounding the British Isles?

Or maybe Iceland? Or maybe both?

I still think Mercator is a bit tight in Europe, a little stretching there might be ideal, even if it was just along the vertical axis. I think the map would still read fine, but you’d get a few more pixel for units into those key European spots. Also if you were willing to shrink South America slightly you could almost curve off a 10th of the map height at the bottom of the screen (which is notorious for players forgetting units in the south sea hehe) without really needing to change Africa/Australia of the pacific. Basically a slight bend would go a long way, even if using Mercator for the baseline.

Oh and I think the possession colors for Dutch Borneo and British Sarawak and North Borneo should be reversed.

My only suggestions :)

Nice work man. That would be a fun map to form the basis of a 1939 game, or any year from 39 on.

I like that you have not yet imposed on the map any extraneous information such as IPC values or VC. This means the map is adaptive for many purposes. I like the general division of territories. Only that the projection is a bit large at the poles for my tastes. If we could shrink them up slightly I think the map would be ideal. Its really more about screen dimension for me when it comes to the Big World Map that Wandering Head made. These days most screens are very long relative to their height, so standard Mercator always seems blown out a bit in tripleA to me, especially at the south end, and of course Europe is always tight. I wish the center picker for tripleA was better at housing units to smaller scales. Its a little better than it used to be, especially with the guiding lines, but still Europe loves to clutter up haha.
:-D

Again though, great design direction!

I’ll probably shift the continents (turning their general direction), and stretch out northern Africa and Europe, will probably require North America to get a bit skinny, but I think the big benefit from this, is that potentially more European spaces can be added. This will allow me to add more to the Mediterranean however (and it really needs the space), perhaps round out where Rome is. Africa, I think needs a bit more work. South America possibly as well, but I sort of need an idea of which cities can be considered major not only there, but elsewhere. Vladivostok will defiantly get added in with it’s own space.

I picked black for impassables, since it tells me that there is nothing there, no play space, it’s simply temporary, and they are there for the designer’s benefit.

I’m not sure where else to put a rounded Sea Zone, I’m considering more though.

The interseting thing with the Supreme Excellence card is what it brings in for strategy, not so much about the numbers. If you attack and concentrate a force into one zone or territory, just to deplete an enemy on a stack of strategically interesting units, you might end up in trouble. What would happen if the defending player plays the Entrenchment or Signals Intelligence card! As you see, it will bring a second level thought to the strategy that we have never seen before. Make it more of a strategy game, and less luck, which is the opposite to what most people think at first sight. If you try these rules you will discover new insights about this second level thought in many other situations of the game play. Enjoy!

Mr. Andersson

@knp7765:

@Gamerman01:

Not everyone agrees the Allies need a bid

I agree with you. I don’t care for bids either. I think either side can win if played right with the setup as is.

That being said, Grasshopper’s list is very interesting. I think you should spice things up though. Make ONE of the dice rolls end up in a $15 bid for the Axis. Perhaps an extra German tank in Poland, an extra Italian tank in Tobruk and an extra Japanese infantry in Kwangsi.
The Allies still have a 5/6 chance of getting some padding for themselves. But now there is a 1/6 chance that the Allies will have to go without.

lol that’s insane.  It would be radical enough to have a 1/6 chance that the Allies get no bid, but to give 15 to the Axis?  Most players would give up before playing if they rolled that.

ok always on then.

My bad… I forgot the 4x rule.  That clears up a lot.

AA scale for destroyers is approximately 1/2400, 1" equals 200 feet.  On that scale an Iowa-class battleship would be almost 4.5" long, rather than the 2.25" it actually is.  Scale for the battleships runs from about 1/3600 for the UK Royal Soveriegn to about 1/4700 for the Iowa.  The Yamato is about 1/4200 and the Bismarck is about 1/4300.  The scale for the aircraft carriers ranges from the Wasp at about 1/3500 to the Shinano at about 1/4200, as all of the carriers are the same length, 2.5".  The two cruisers are about 1/3700 scale.  The subs range from the German Type VIIC at about 1/1400 to the Japanese I-15 class at about 1/2400.

If you buy 1/3000 scale ships, which is 1" equals 250 feet, an Iowa will run about 3.5 inches, considerably larger than the destroyers in the game.

Quote from: oldsalty on September 01, 2008, 07:17:52 am
That appears to make sense from the few pieces I’ve ordered to compare size and quality.

What is the difference between 1/2400 and 1/3000 in inches?  Looks like the 1/2400 is an USA scale (based in ft/in).  Is the 1/3000 the European scale based in meters?

Side by side, would a 1/2400 piece actually be 20% smaller than a 1/3000 scale piece?

A 1/3000 scale ship will actually be about 20% smaller than a 1/2400 scale ship.

I will post the scales for the aircraft once I finish measuring them.

Thats a complete waste of time…. The only scales for small inexpensive metal ships THAT IS ACTUALLY CURRENTLY IN PRODUCTION IS 1/2400 AND 1/3000…SO THE ONLY REALISTIC OPTION IS TO BUY 1/2400 SCALE WHICH ARE OFFERED FROM NAVWAR AND SKYTREX, WHILE 1/3000 SCALE IS TOO LARGE.

The scales are the same regardless representing objects 1/3000 or 1/2400 times smaller than original. Its not a Metric vs. English system.

Axis and allies uses 1/700 scale planes and 1/285 armor and 15 MM infantry ( or to convert you use HO 1/87 plastic or 1/72). These are the scales your looking for and i already posted the order sheet in another thread.