Deck building area control WWII game?

USSR Lid.png USA Lid.png UK Lid.png Weapons Development.png National Production.png Battle Board.png

I plan on printing some out from Siredblood’s link.  I watched his video and you can certainly do it that way.  My only concern with adhesive backed “stickers” is that with all the handling of game pieces, I can imagine that the stickers begin to peel up after a while. If you’re going to use the adhesive backed stickers, might I recommend to apply thin CA glue around the outside edge of the sticker after you’ve burnished it down on the carrier deck.  You can get some thin CA at your local hobby shop where they sell RC planes, or just order it online.  Because it is literally as thin as water, you’ll need to apply it with some sort of makeshift precision applicator.  But after that, you won’t have to deal with annoying stickers that don’t want to stay down tight.

Also, if you use a glossy type sticker paper, after you’ve applied it and the carrier is “all done”, spray the entire piece with a light coat of Testor’s Dullcote spray laquer.  You’ll get rid of the sheen both on the plastic and from the glossy paper. All the colors will “blend” together and the piece will look much better.  :wink:

Thanks for the offer, however the design I created for this project has already been submitted so unfortunately I won’t be able to change much until the project is completed.

While I hope there will be some people who find this software useful, it is only meant to be a small scale project as part of my software class so I don’t mind if there isn’t great support for it.

When I painted my units, I had issues with Britain, I originally made 2 schemes, then decided I only wanted the tan, not green… On my painting, I used a combo of lacquer Enamel and acrylic, it was at the enamel stage, but I soaked them in paint thinner (in all preparation to consider them toast and order new units)… but they came clean, they soaked for 10 min or so, and I used my tooth brush (yes mine lol, bristle’s turned green, and yes, I still use it, the green faded away HAHA) to scrub away the paint film.

Richard,

@Maofator:

Looking good Mr Johnson!
––Yes,…VERY NICE!
Although I’ve told you in person I realize I’d overlooked giving you some well deserved public acclaim. Your "stickers"are a novel approach and look very crisp and clean. Let’s talk further on the project I’d discussed with you earlier. Again,…Wel Done!
Tall Paul

@HBG wow

Wow that woodburning is top notch! I have other skillsets pertaining to my hobbies, but that is certainly not one of them. I am very impressed with this.

this first pic is what i had been using, i manually printed things out in one page sections via “print selection” command and pieced them all together, and laminated them with clear packing tape. Ultimately it proved to be a little larger than the default gameboard like I wanted, but still sloppy looking and with some bumps here and there which complicated unit placement due to tipping or sliding:

it was larger enough than the default board that things in europe didn’t seem so crowded anymore, but shoddy looking still, and that can wear on the nerves.

So I finally said enough is enough, and took the map pdf file on a jump drive down to minuteman press in London Kentucky and had them blow it up and laminate it….it costed $118 IPCs U.S. Dollars.

Its 2 foot by 3 foot, and gives us plenty of room for stacks. I got tired of kenny’s fat fingers knocking over my german stacks and scattering them across europe…he says my money was wasted because “those damn germans were going across europe anyway I just helped you out is all”.

but here it is: