Custom Global 1940 Reference Charts

I haven’t used that map, but I’d recommend scaling your pieces up by about 10-20% to keep things proportional. Test fit as you go to make sure it works.

@Call77 and its not finished like I have said a few times

@the_good_captain

All my boards are on 5mm foamex boards.
Waterproof, fade proof, and really hard wearing

@jeffcamis:

I determined the biggest size that would fit on my dining room table would be 28 inches by 51 inches.  Can I go to a print shop have them down a map and print it in that size?

You definitely can print the map I shared with the community (look at 2Huskies link) at this size.

I plan on printing some out from Siredblood’s link.  I watched his video and you can certainly do it that way.  My only concern with adhesive backed “stickers” is that with all the handling of game pieces, I can imagine that the stickers begin to peel up after a while. If you’re going to use the adhesive backed stickers, might I recommend to apply thin CA glue around the outside edge of the sticker after you’ve burnished it down on the carrier deck.  You can get some thin CA at your local hobby shop where they sell RC planes, or just order it online.  Because it is literally as thin as water, you’ll need to apply it with some sort of makeshift precision applicator.  But after that, you won’t have to deal with annoying stickers that don’t want to stay down tight.

Also, if you use a glossy type sticker paper, after you’ve applied it and the carrier is “all done”, spray the entire piece with a light coat of Testor’s Dullcote spray laquer.  You’ll get rid of the sheen both on the plastic and from the glossy paper. All the colors will “blend” together and the piece will look much better.  :wink:

Thank you for the positive feedback! I forgot to say that in the previous post, and it’s very important that I do. It’s very encouraging and motivating to get good feedback, and we certainly appreciate it. The above mentioned four Essex class carriers are complete, a long with several other ships of the US Navy, so its time to update the thread. Just ships by FOlewnik in this post. More aircraft are almost done but I haven’t put magnets in them yet (so not really done), so no aircraft pictures this post.

We’ll start with the two “odd men out” of the HBG sculpt Baltimore Class Heavy Cruisers. Why “odd men out”? Because in the below picture we have on the left, the USS Unnamed Baltimore Class Cruiser Wearing Measure 31a, Design 9C, and on the right is the USS Columbus (CA 74), which wasn’t commissioned until June 8, 1945. The cruiser with the long name is wearing a design that was never used, but was taken from a period design found at https://www.wikiwand.com/en/World_War_II_US_Navy_dazzle_camouflage_measures_31,_32_and_33:_cruisers. The USS Columbus is wearing a Measure 12 Modified designed by FOlewnik to match the pieces we’ll be using for the US Atlantic fleet. These will get aircraft added, but at the time of the photographs the decals on the wings of the aircraft were drying.
DSC_0510a.jpg
DSC_0511a.jpg
DSC_0512a.jpg
Pattern_sheet,_MS-31a_9C_for_Baltimore_class.jpg

Next up are some metal destroyers from GHQ. Below on the left, the very brave USS Johnston (DD-557) painted in MS-3_/6D as it looked when it was “Sunk by Japanese Warships off Samar October 25 1944,” and next to it is USS Van Valkenburgh (DD-656) painted in camouflage Measure 31, Design 9d. All Wartime photos taken from Navsource.org, a great resource for US Navy history buffs.
DSC_0514a.jpg
DSC_0515a.jpg
DSC_0516a.jpg

Below, the real USS Johnston shortly before her final battle, and the official design sheet:
DSC_0516a0555715.jpg
Pattern_sheet,_MS-31-32-33_6D_for_Fletcher_class.jpg

A great wartime picture of the USS Van Valkenburgh, which is the same on both sides:
DSC_0516a0565603.jpg

Now on to these two. From GHQ, USS The Sullivans (DD-537) painted in Measure 1, and the HBG sculpt light cruiser USS Marblehead (CL-12) who always wore Measure 2 throughout the war. If I can get FOlewnik to put the Shamrock on the first stack of The Sullivans when he puts the scout aircraft on the Marblehead, as seen in the below wartime photograph, I’ll come back and edit the post.
DSC_0520a.jpg
DSC_0522a.jpg
DSC_0519a.jpg
DSC_0520a0553740.jpg
DSC_0520a0401208.jpg

The post previous to this post showed four Essex Class sculpts from HBG getting prepped and started with a base coat. Those are now completed and I had too much fun playing with them and the aircraft (that are complete so far) while I was taking photographs. I’m pretty sure I didn’t make any wooshing sea or aircraft noises or FOlewnik would have laughed at me. I was tempted though, and here’s why:
DSC_0524a.jpg
DSC_0525a.jpg
DSC_0526a.jpg
Above we have the first of the Long Hull Essex Class, USS Ticonderoga (CV-14) on the left looking as she did after her April 1945 refit from suffering a Kamikaze Attack on January 21, 1945, and USS Bunker Hill (CV-17) on the right. The Bunker Hill is wearing Measure 33, Design 6A, of which Navsource says, “Her port side camouflage pattern was the most intricate design applied to any carrier.” One glance can confirm that!
DSC_0526a021772.jpg

The final two Essex Class carriers are the USS Essex (CV-9) herself, and the USS Bennington (CV-20). The Essex is wearing a unique pattern, Measure 32v6, Design 10D, adapted from a destroyer pattern specifically for the long hulled Essex. The Bennington is painted in Measure 32, Design 17A.
DSC_0527a.jpg
DSC_0528a.jpg
DSC_0529a.jpg
DSC_0529aPattern_sheet,_MS_32a_17A_for_Essex_class.jpg
DSC_0529aUSS_Essex_(CV-9)_in_MS_32_6-10D_camouflage.jpg

Finally, some group pictures just for fun:
DSC_0531a.jpg
DSC_0532a.jpg
DSC_0533a.jpg
DSC_0534a.jpg
Thank you for checking out the post! If you liked it, please click the little heart. I’m trying to figure out why our post is only rated with a 2 when it seems it should be a bit higher if the other likes are any indication.

@Young:

Thanks CWO Marc, really appreciate your comments… do you play often? I understand there is a lot of players in Montreal, do you have a game group?

For many years I’ve had too much going on in my life, professionally and otherwise, to have had time to do much of anything other than collecting the A&A games.  And, to be honest, I have too many issues with many of the features of the various A&A games that I’ll probably never play anything other than what I’m hoping to create at some distant point in the future when I do have the time for it, which is a completely personalized version of the Global game that, for all intents and purposes, keeps the sculpts and the map board but throws out the entire rulebook and reconceptualizes the game from scratch.  And it’s not even fully correct to say “keeps the sculpts and the map board” either.  I’ll be expanding the number of nations and the number of unit types by making use of the very large pool of A&A sculpts I’ve acquired over the years, for instance the ones from the early-edition games and the ones from 1941 and 1914.  And as I’ve noted in the thread where I’ve posted pictures of my custom table, one of the first things I did to the Global 1940 map was to rework its “under-the-plexiglass” roundel allocations to better reflect the structure of the world as it existed prior to the invasion of Manchuria in 1931, as a starting point from which I can then modify the map (by placing roundels on top of the plexiglass) to represent any subsequent starting date from 1931 onward.  A related project that I worked on to create the infrastructure for this eventual new game was the Global 1940 map inventory, a copy of which I posted over here last September:

http://www.axisandallies.org/forums/index.php?topic=36590.0

But at this point I don’t have an actual plan for what this reconceptualization will look like.  Nor am I likely to do so until I have the time to work on this project solidly for months at a time…so this may have to wait until retirement (which isn’t for tomorrow by a long shot) before this idea translates into anything concrete.

This will be the last pictures until the end of the year.

The US EUROPEAN FORCES will be the next set that graces my map, followed by the GERMANS, but it will be awhile before the Axis can get on the board.

I hope you have enjoyed the pictures.

Until next time.

Over and out! :-D