If you need some WWI / WWII buildings

Where are the two dots? The two little islands left of Borneo are on the map anyways and it’s hard to see if they are darker because of a pen or because of the quality of the picture.

Anyhow: whatever you try to clean it, please try it on the back of the board first. A bit of the artwork of the map is folded over the edge of the board towards the back of it. Better to ruin that bit that the actual top of the board.

The key that I’ve seen is the dam rifles like to peel from use and I do use my pieces a lot. So main reason why I asked if there was a better sticking primer.

With some specific parts of pieces, I think moderate chipping and flaking of paint is going to be inevitable, especially with the rifle ends of the infantry pieces.  Those end pieces (the rifle barrels) flex and bend around when being handled.  Therefore, you need to find a flexible primer and paint to work with that flexing.  Latex paint is one type that comes to mind.  This type of paint is used heavily by scale RC airplane guys (me included).  As a scale RC airplane is flying in the air, the wings and control surfaces get flexed.  Furthermore, fluctuations in temperature and humidity make the wooden structure of the RC plane expand and contract.  They need a paint that works with all this flexing and contracting so that the paint doesn’t flake off and chip away.  Latex paint.

I have not tried it on scale miniature game pieces, so I cannot say with certainty if it works just as well in this arena.  All you can do is try it and see.

Cheers,
Busarider

Looks like you have a pretty good collection already. I have about $100 invested after buying both of the global games and still nowhere close to where I want to be. Nice setup though

Iwugrad, do you have any pieces painted that you can post pictures. You will need about 20  posts for the administrator to open up privileges for you to post any pictures.

I can’t wait till you have something to show us.

Good luck on your set! :-D

They in fact DO have a European counterpart. Also, if it were just decals you may be able to request a standard mailing envelope if they dont have the stock you are looking for in Europe and have to get it from the US. Ask him in an email first, it never hurts to ask.

I know a producer in Germany, who could deliver a mixture of white dashed and continous lines decals (s. picture). One decal consists of 23 white lines, each of 125 mm length and 0,75mm width, where each decal is EUR 3,50. A direct shipping from the producer to the U.S. would be very expensive, it is about EUR 35,-. If you are interested in, I can order the decals and send it to you personally. This will cause shipping costs of roundabout EUR 10 (depending on the weight…).

The decal is a digital print, that is, you have to cut out the lines. More pleasant would be a screen print, then each line is spearated from the others as a distinct decal in the printing process.

The producer also offers an individual development of decals, but I don’t know how much this is in EUR or $. If you are interested in I will ask.

Web: www.ds-design.de, english and german language

white dashed lines.jpg

Guys,

@Vance:

I rather like the cities from Risk as minors and the grey axis & allies factories as majors because the risk cities have a little building on them that looks just like the A&A factory without the smokestacks (same 3 tiered roof). � If you upgrade it to a major that little factory becomes an giant one I guess.

Here’s an pic of both the OOB (Major I.C.) and the “Risk” (Minor I.C.) side by side. These were prototypes as the end result had no doors, windows, or skylights added and the red brick style of smokestack. Personally, I love how the “Risk” city represents a Minor I.C. and I simply can’t stand the cardboard cr*p that comes with the game. Hope this helps.

“Tall Paul”

p.s.–-These were painted by “Allworkandnoclay” and they have a thread about them specifically if you’re interested.

http://www.axisandallies.org/forums/index.php?topic=26834.0

factories1-1.JPG

Those tanks are some of the best AA pieces I’ve ever seen! I really like the extra details added and especially like the matt finish.