[Global 1940] Additional Unit Stats

@FranceNeedsMorePower

Go to https://github.com/triplea-game/triplea/releases/

Click on the latest version (the top post).

Under “Assets” there should be a set of links. Click on the one that fits your computer (if you use Mac, click on the link with the macos, Windows, the one with windows in it, etc.).

Click on the file in Downloads. It should open up a TripleA downloader similar to the one you used when you first downloaded TripleA. It should open (if there’s an error, it’s probably on your end).

It’s a vast improvement over 2.5 but is very easily navigable.

Mind you, you could pair your reduction of IPC values with a reduction in the number of units on the board at the start of the game. How much you would have to remove is something you would have to play out several times in order to get the balance right. I suspect this would start moving away from “easy fix” and moving towards “might as well be a different game”.

Such is gaming.

-Midnight_Reaper

@baron-Münchhausen

I reviewed the 2 hits Battleship values to 2.5 multiplier factor.
It is an approximation but this is easier to use this value if you need to assess between two naval fleet during a live game with no AACalc allowed.

It is based on the very even (almost 50%-50% survival equilibrium ) combat between 1 Destroyer @2 and 1 Cruiser @3 against 1 Battleship, 2 hits @4.
http://calc.axisandallies.org/?mustland=0&abortratio=0&saveunits=0&strafeunits=0&aInf=&aArt=&aArm=&aFig=&aBom=&aTra=&aSub=&aDes=&aCru=&aCar=&aBat=1&adBat=&dInf=&dArt=&dArm=&dFig=&dBom=&dTra=&dSub=&dDes=1&dCru=1&dCar=&dBat=&ddBat=&ool_att=Bat-Inf-Art-AArt-Arm-Sub-SSub-Des-Fig-JFig-Cru-Bom-HBom-Car-dBat-Tra&ool_def=Bat-Inf-Art-AArt-Arm-Bom-HBom-Sub-SSub-Des-Car-Cru-Fig-JFig-dBat-Tra&battle=Run&rounds=&reps=10000&luck=pure&ruleset=AA1942&territory=&round=1&pbem=

1 Destroyer @2 and 1 Cruiser @3
5 pips * 2 hits = 10 pips*hits

1 Battleship, 2 hits @4.
4 pips * 1 BB worth 2.5 hits = 10 pips*hits

@hengst not wasted at all. Repetition is what fine tunes these scenarios to make them the best they can be. Keep up the good work

Ichabod,
This project is finished.  I left a link on the first post to the latest version.  All the rules you need to play are from 1940 or specified with the setup.  Countries like Poland are simply made pro–allies.  Although this is 1939, it is only suppossed to be a one turn rewind of 1940.  To faciiliate blitzkreig, Germany can take Poland, Denmakr, Norway, and Holland/Belgium before the Allies can react.  France is suppossed to fall turn two.

As for Russia, it can take all the territories you mentioned.  (See the politicial situation changes).  All other rules are left as OOB because I want this to be a generic setup that people can customize as they want.

Europe 1939 is finished, and I will get the Pacific and Global finalized soon.

I would be simpler.
A1 if towed (M2 max), D1 each round against either Tank or Aircraft, not both in same round.
Cost 5

@oztea:

I like this idea a lot. I had a similar idea a while back, wherein to win you had to get to a certain number of points. 2 points for each capital, 1 point for each non capital VC, and 1 point for each National Objective you satisfied this turn.

You calculate the axis total, and the allied total.

Lets spit ball, the axis wins if they have 20 points at then end of turns 1-5
or they win if they have 18 points at the end of turns 6-10
or they win if they have 16 points at the end of any turn after 11 they win.

The Allies would win if the axis falls below 10 points at the end of turns 1-5.
Or if they fall below 12 points at the end of turn 6-10
Or if they fall below 14 points at the end of any turn after 11.

I’m gonna have to digest this and see how the math works in different situations, regardless… it’s great to hear from someone that believes in the points per city formula, and I really like the idea of points for objectives as well.

I have some additional rules here:

http://www.boardgamegeek.com/filepage/70044/aaa50-expansion-rules-tech-chart

And the tech chart as an excel:

http://www.boardgamegeek.com/filepage/70044/aaa50-expansion-rules-tech-chart

They’re for AA50th but should work fine…