Need Ideas for New Decals

Also slowly working on making my own pieces and designs for my new resin printer. I’m going to open up an online store for new pieces, boards, rules, and other items in the near future.

@LebaneseWarlord said in Need advice for custom dice DIY:

I’ve recently bought 96 dice because I wanted to make custom hit/miss dice for Global 40. I bought these dice from amazon and they’re plain blank and white dice.

I don’t have a lot of experience with DIY projects but I have access to a lot of good tools so I’m looking for advice regarding techniques on how to mark and repaint the dice I bought.

For the marking, I was thinking about using a rotary tool to carve a little dot.

The real challenge is the painting. I looked a lot on internet and I can’t seem to find a technique for painting on plastic that everyone agrees on, but here’s what I have so far.

Wash the dice to remove any grease that could be on the surface Use very fine sandpaper or some sort of abrasive to remove the protective finish that is on the dice right now and offer a better surface for the new paint to stick Wash the dice again the remove the dust from the paint removal Apply one or a few (I’m not sure about this one, I’ll read what is suggested on the can) of primer Apply a few thin layer of the color I want on the dice Paint a white dot in the carving I made earlier with a fine brush Apply one or a few (not sure about this one either, something will be suggested on the can) of clear finish to protect the paint

Any correction or suggestion would be very welcome!

Guys use RIT dye for color. Go to Siredblood’s custom dice you tube video. Shows how he used a jig to spot hole dice and then dye them

Custom Ship Deck Decal Sets

Hello everybody. I wanted to announce that AxisandAlliesBoardGaming.com has released new decal sets specifically made for the Axis & Allies naval game pieces from the following game versions: Europe 1940, Pacific 1940, Spring 1942 & 1941 Anniversary Edition.

This is the DIY option for those who want the enjoyment and challenge of painting their own game pieces. Now you can finish them off with precision-cut waterslide decals to give your creations a professional look. Each individual ship deck decal has been pre-cut to ensure a perfect fit every time.

It is very difficult to get a clean edge on your ship decks using a paint brush by hand. One side of the ship might have straight lines but the other side might be noticeably wavy or you painted onto the superstructure by accident. You can pay others to painstakingly paint your ships but that can be very expensive for an entire fleet or game set. With these decals, there are no more worries about the final look and feel of your ships. Now it is easy to produce game pieces like a pro, and you can paint as many pieces as you want and every one will look great.

These are sold in fleet sets that include deck decals for all the naval game pieces for the selected country and game version. Some examples:

The Italian Europe 1940 set – 26 ships in all.
a0b62420-bbf2-436c-a412-dda83ecf66b2-image.png

The German 1941 Anniversary Edition set – 42 ships in all.
30f1e58e-010f-4601-8dec-38a9e9e69e09-image.png

The French Europe 1940 set – 18 ships in all.
7ef6e16a-e55e-4269-a772-16787441e7c5-image.png

The US 1941 Anniversary Edition set – 48 ships in all.
2f768989-caa2-41f1-a126-785688e40dbf-image.png
Check them out and more at www.axisandalliesboardgaming.com.

Here’s the latest addition, flak towers !

https://www.shapeways.com/product/68WV3LMFT/wwii-flak-tower-x6?optionId=65736803&li=shop-inventory

I just wanted to pass on to everyone some new units on Shapeways that are now in Axis and Allies size.
C.O.B. Constructs and Miniatures has a set of New Mexico class Battleships in 1/3800 scale that are perfect for your light Battleships and New Aragon Mechanical Works has just made available a Aichi E16A1 Zuiun (Paul) float plane in the 1/500 scale.  So, if your looking for some new units to add to your board then check these two out.

Nice work - Dare I ask how many hours you put into it? For interest’s sake.

I’m not aware of such a blank outline map existing.  Your best option might be to cover the game map with several taped-together sheets of clear acetate (the kind used for purposes like overheard projection) and trace the borders with a felt pen to produce a blank outline.  You’d then have various options for transfering this outline to the wood surface.  A low-tech method would be to cover the wood surface with sheets of carbon paper (if you can still find any, since it’s gone out of style), place your acetate outline over the carbon paper, then trace over the borders with a hard pencil.  Alternately, you could scan or digitally photograph your acetate outline and use that as the printing file you mentioned.

Hi, how is the work going ?
I am looking forward for that app.