Custom carriers from OOB's and painted pieces

@LebaneseWarlord said in Need advice for custom dice DIY:

I’ve recently bought 96 dice because I wanted to make custom hit/miss dice for Global 40. I bought these dice from amazon and they’re plain blank and white dice.

I don’t have a lot of experience with DIY projects but I have access to a lot of good tools so I’m looking for advice regarding techniques on how to mark and repaint the dice I bought.

For the marking, I was thinking about using a rotary tool to carve a little dot.

The real challenge is the painting. I looked a lot on internet and I can’t seem to find a technique for painting on plastic that everyone agrees on, but here’s what I have so far.

Wash the dice to remove any grease that could be on the surface Use very fine sandpaper or some sort of abrasive to remove the protective finish that is on the dice right now and offer a better surface for the new paint to stick Wash the dice again the remove the dust from the paint removal Apply one or a few (I’m not sure about this one, I’ll read what is suggested on the can) of primer Apply a few thin layer of the color I want on the dice Paint a white dot in the carving I made earlier with a fine brush Apply one or a few (not sure about this one either, something will be suggested on the can) of clear finish to protect the paint

Any correction or suggestion would be very welcome!

Guys use RIT dye for color. Go to Siredblood’s custom dice you tube video. Shows how he used a jig to spot hole dice and then dye them

Greetings,
Did you ever finish your map?
If so, can you share with community?
I am in process of selecting a map to print, and yours embodies much of what I am looking for in a map.

@Noble:

I love that you touch your pinky to your other hand. I do the same when painting and it’s the best way to stay steady. Keep up the great work!

LOL, that’s funny you noticed! Thanks for the comment!

Anzac defender,

––Keep up the good work.
----I don’t know if you’re interested, but there is a company called I-94 Enterprises that make many, many decals that are useful for our A&A units.

Tall Paul

With the complexity of modifications you’re attempting, you might want to illustrate a map by hand and then scan it. Once you have the territory proportions edited on paper and scanned, you can than modify and touchup in the design programs you mentioned. Your task seems very ambitious and I hope to see your final version some day, in the mean time… Imperious Leader may have some advise as he is the most experienced map maker of us all.

Ready to be placed on the board.

Magnetic Carrier 1.jpg
Magnetic Carrier 2.jpg

You guys might want to check these sites out. Or just scroll up above this post.

@Imperious:

I found it.

http://corseceng.com/omni-stand/

This link has everything you need.  I will be using the black 30 mm stand with peg and micro magnets from the above link.

I think for global 40 sets will suffice, possibly 50. Need micro magnets for all the planes ( about 80-90) and 40 for the stands.

@Imperious:

I am combining the resources for making these bases.

This site has the proper magnets. Still looking for metal rods that are pre-cut about 2 inches.

A friend of mine has the most perfect examples. Here is what he did ( reprinted from email).

I bought the magnets from K&J Magnetics…  They were almost the smallest available size with a hole in the center to fit a 1/16" rod.

I drilled holes in pennies, glued 1/16 inch brass rod into them, placed the magnet on top and glued it down.

http://www.kjmagnetics.com/products.asp?cat=10
http://www.kjmagnetics.com/proddetail.asp?prod=RC22  ( this link has the base with 1/8 OD hole)

@Gargantua:

http://www.axisandallies.org/forums/index.php?topic=21083.0

Is a link where YOU personally link the instructional!

Also
http://www.axisandallies.org/forums/index.php?topic=21207.0

@Gargantua:

Somewhere in the customizations section a guy made a whole tutorial, with downloadable PDF’s.

Other Links

http://www.axisandallies.org/forums/index.php?topic=22472.0

http://www.downloadonline.info/dl/870394/magnetic_ac/

Hey Everyone,

Just joined the forum because I was looking for ideas on customizing my new G40.  It’s awesome to see all the information that you guys are posting.  I’m just learning how to navigate through this forum and I’m looking forward to be a part of the community. Sorry if this is the wrong section to say hello.