Custom carriers from OOB's and painted pieces

Here is Akagi sculpt as Akagi, and again modded as the Kaga, with the tower taken from HBG’s Casablanca light carrier:

Hiryu:

Soryu (a little blurry, sorry!) Added better side shots:

Here’s all 4 together:

The various modded Akagi sculpts lined up with original Akagi so you can see what’s cut away from the Akagi sculpt to make a shorter light carrier- from the top: completed Zuiho, Shoho in progress with white putty before its sculpted away, 95% completed Amagi, Akagi at bottom.  On the unpainted black Shoho-in-progress, you can still see where the tower was cut away.  That tower was used on a OOB Shinano sculpt to make the Zuikaku in the first picture of the post. The pieces are lined up so you can see the front of the sculpt was cut off for the Zuiho, a little front and back for the Shoho, and the rear was cur off and the bow extended to better fit the ship profile on the Amagi.

Modded cruisers, with extra gun platforms on the tower: (these have been further modified- better pictures below)

In for a “rest and refit” to replace lost scout planes:

Zuiho:

Ryujo made from a Shinano.  FJO got a saw and drill from the hobby shop and went to town- note the stern has been cut away under the deck:

Amagi (not quite finished, still needs the sides done):

Another angle on the Amagi:

The only decal used on the carrier decks was an HBG Jap meatball decal, and with all else that went on with the carriers (like putting in magnets AFTER they’d been painted on some), even those had to get repainted.  When the holes were drilled for the magnets (slightly over 1/16th of an inch deep to bury the magnet), the exiting plastic looked funny (like bombs hitting), so FJO took a picture:

The paint is the usual water based stuff you find at the hobby store.  I’m using Testor’s enamel on the planes.  I think “Army Painter” may be one of the brands he’s bought.  We’re both relying a lot on Army Painter’s brushes called Insane Detail, and another called The Psycho.  Both are pretty small, and FJO has a few Insane Detail brushes that have lost some hairs and are VERY thin.  He’s also found some pens at Michael’s with tiny, tiny heads to make the arrestor cables and dots on the carriers and ships. The brand of the pens is Pigma Micron and you might find them in a 3 pack with sizes .005, .08 & .02.  Brushes from Michael’s in sizes 20/0, 10/0, 0000, 000, and 0.

I came across an excellent graphic while I was researching planes for Japan that showed the squadron markings for each of the big 6 carriers, which lead me to read about Takeshige Egusa, so I had to do his plane, along with appropriate Vals and Zeroes for each of the 6 major IJN carriers.  Airfix makes an orange Val that I found some photos of, and I wanted to keep at least one piece with the original plastic color on it, and it turned out that the orange Val was just right for one of the carriers.

I bought some Oscars and Vals from HBG because I liked their Stuka G’s so much, and we wanted land based fighters for the Japanese forces in China.  While researching Japanese air units based there, I found a nice camo pattern on an Oscar, so I copied it for the fighter and tactical based in Kiangsu, and when they were done and placed on the board, our eyes bulged.  What great camo for those planes!  The Manchurian Oscars are based on actual planes that were stationed there, but the tacticals were just painted to match.  The black camo is showing signs of wear on the tail that need to be touched up.