Painted Pieces by Johnson

@barnee thanks, I was inspired after watching Midway to do them like that, and to differentiate them from fighters for my less observant friends. I liked it so much I did my Stukas and Japanese tacs the same way as well.

@hengst said in Historical Board Gaming Piece Colors:

On this note, is “blonde” or “tan” a better color match for OOB UK G40 pieces?

I think tan is a better match. Blonde is too light a color to be a good match.

-Midnight_Reaper

Thank you for the positive feedback! I forgot to say that in the previous post, and it’s very important that I do. It’s very encouraging and motivating to get good feedback, and we certainly appreciate it. The above mentioned four Essex class carriers are complete, a long with several other ships of the US Navy, so its time to update the thread. Just ships by FOlewnik in this post. More aircraft are almost done but I haven’t put magnets in them yet (so not really done), so no aircraft pictures this post.

We’ll start with the two “odd men out” of the HBG sculpt Baltimore Class Heavy Cruisers. Why “odd men out”? Because in the below picture we have on the left, the USS Unnamed Baltimore Class Cruiser Wearing Measure 31a, Design 9C, and on the right is the USS Columbus (CA 74), which wasn’t commissioned until June 8, 1945. The cruiser with the long name is wearing a design that was never used, but was taken from a period design found at https://www.wikiwand.com/en/World_War_II_US_Navy_dazzle_camouflage_measures_31,_32_and_33:_cruisers. The USS Columbus is wearing a Measure 12 Modified designed by FOlewnik to match the pieces we’ll be using for the US Atlantic fleet. These will get aircraft added, but at the time of the photographs the decals on the wings of the aircraft were drying.
DSC_0510a.jpg
DSC_0511a.jpg
DSC_0512a.jpg
Pattern_sheet,_MS-31a_9C_for_Baltimore_class.jpg

Next up are some metal destroyers from GHQ. Below on the left, the very brave USS Johnston (DD-557) painted in MS-3_/6D as it looked when it was “Sunk by Japanese Warships off Samar October 25 1944,” and next to it is USS Van Valkenburgh (DD-656) painted in camouflage Measure 31, Design 9d. All Wartime photos taken from Navsource.org, a great resource for US Navy history buffs.
DSC_0514a.jpg
DSC_0515a.jpg
DSC_0516a.jpg

Below, the real USS Johnston shortly before her final battle, and the official design sheet:
DSC_0516a0555715.jpg
Pattern_sheet,_MS-31-32-33_6D_for_Fletcher_class.jpg

A great wartime picture of the USS Van Valkenburgh, which is the same on both sides:
DSC_0516a0565603.jpg

Now on to these two. From GHQ, USS The Sullivans (DD-537) painted in Measure 1, and the HBG sculpt light cruiser USS Marblehead (CL-12) who always wore Measure 2 throughout the war. If I can get FOlewnik to put the Shamrock on the first stack of The Sullivans when he puts the scout aircraft on the Marblehead, as seen in the below wartime photograph, I’ll come back and edit the post.
DSC_0520a.jpg
DSC_0522a.jpg
DSC_0519a.jpg
DSC_0520a0553740.jpg
DSC_0520a0401208.jpg

The post previous to this post showed four Essex Class sculpts from HBG getting prepped and started with a base coat. Those are now completed and I had too much fun playing with them and the aircraft (that are complete so far) while I was taking photographs. I’m pretty sure I didn’t make any wooshing sea or aircraft noises or FOlewnik would have laughed at me. I was tempted though, and here’s why:
DSC_0524a.jpg
DSC_0525a.jpg
DSC_0526a.jpg
Above we have the first of the Long Hull Essex Class, USS Ticonderoga (CV-14) on the left looking as she did after her April 1945 refit from suffering a Kamikaze Attack on January 21, 1945, and USS Bunker Hill (CV-17) on the right. The Bunker Hill is wearing Measure 33, Design 6A, of which Navsource says, “Her port side camouflage pattern was the most intricate design applied to any carrier.” One glance can confirm that!
DSC_0526a021772.jpg

The final two Essex Class carriers are the USS Essex (CV-9) herself, and the USS Bennington (CV-20). The Essex is wearing a unique pattern, Measure 32v6, Design 10D, adapted from a destroyer pattern specifically for the long hulled Essex. The Bennington is painted in Measure 32, Design 17A.
DSC_0527a.jpg
DSC_0528a.jpg
DSC_0529a.jpg
DSC_0529aPattern_sheet,_MS_32a_17A_for_Essex_class.jpg
DSC_0529aUSS_Essex_(CV-9)_in_MS_32_6-10D_camouflage.jpg

Finally, some group pictures just for fun:
DSC_0531a.jpg
DSC_0532a.jpg
DSC_0533a.jpg
DSC_0534a.jpg
Thank you for checking out the post! If you liked it, please click the little heart. I’m trying to figure out why our post is only rated with a 2 when it seems it should be a bit higher if the other likes are any indication.

Love HGB……but $3-$4 a piece adds up

So very true. When I first started painting my aircraft I had to include decal roundels for the players to distinguish the pieces from one another. My naval units are painted mostly with a color scheme for playability except for the capital ships like the Carriers and popular Battleships. All of them have a decal or flag to show which nation they belong too. I actually replaced the OOB British Cruisers because I thought they looked too close in size with the destroyers. I ended up replacing with some ships I found on Shapeways. The biggest problem I had with naval units is that they can exist in the same seazone with enemy pieces unlike land territories. Because of this I decided to keep the subs, destroyers, cruisers and non unique battleships following a color scheme. There are so many colors in the spectrum though we should be able to come up with a solution that will make them look more historical yet keep the pattern or color scheme for the nation. I really would love to paint all the ships historically and maybe I will revisit them again someday. Every time I go back and repaint my pieces I seem to get better at it. Or at least I think I do, hehe.

@sgtwiltan:

Yes. There are so many. Trying to get one thing done at a time. I sent back some pieces and have started on a big batch of artillery which he loves. I’m amazed at his patience. Still have a lot of pieces he sent me and was able to find and keep them in a box so I know which pieces are his that I need to work on. They had been lost in multiple boxes from when I moved 4 years ago. I’ve also redone literally hundreds of PZIIIs including some all of the painted ones. One of these days…… I’ll get them done.

That is cool! I’m sure he doesn’t mind, because the end result is fantastic. :-)

Heyo Paul,

I’ll look around… I think I have some A&A pics I never posted, I’ll slap 'em on here.  Been painting other figs more recently (when I actually have time :|).  You have any pics of your cool minis during a game?  I think it would be cool to see them ‘in action!’.