Tjoek's 1940 Global Map file and setup charts (Updated May 30th 2018)

@Tjoek:

@Loig:

thanks for the reply. did you layer it?
:mrgreen:

Short answer is no. I did make my changes in layers, but most where merged along the way to keep the total file size manageable (just under 1GB)

thanks buddy!

@Macaoidh:

I have been keeping a attentive eye on this project. After taking a good look at the map, I wanted to provide some feedback  The quality of your work is exceedingly impressive! I am currently shopping around for a printer to bring this to reality. Thanks for all the countless hours you spent on this project and for supporting this community in such a tangible way.

Thumbs up.
Plus 1 to  you, Tjoek.

Dutch Lancaster recently uploaded a video on youtube of the G40 event we recently had in Amsterdam (the Netherlands).

There were 2 printed versions of this map present (the right table is the scaled version of 100x219 cm)

See https://www.youtube.com/watch?v=inf0muIwV_I

@Quirky-Turtle: Great video! The printed map looks fantastic. I’m curious though- what do the Litko Flaming Wreckage and Splash Markers indicate on the printed map, and the large green chess pawn looking things on the oob board represent?

@DMcLaren: Haha good spot
In my games I use the Medium Flaming Wreckage markers from Litko as indicators for Combat’s and territories that change hand. This makes it easier to see in one overview if you’ve rolled all battles and handled all IPC changes. I believe the green pawns on the other map are used in a similar way.
In order to not forget to move certain units in the non-combat movement phase I use the Litko yellow alert tokens.
I use the micro flaming wreckage markers for damaged capital chips.

Finally the splash markers are used to mark convoy disruptions. We’ve found that typically when moving into a SZ during your own turn you tend to remember there is a convoy disruption but by the time the next player comes around you forget, so this way we can quickly scan the board at the end of each round and see if we’ve overlooked anything.

@Tjoek this is incredible. Printing this out as I type. Now to find a sheet of 36x78in plexiglass…

@vodot said in Tjoek's 1940 Global Map file (Updated May 30th 2018):

@Tjoek this is incredible. Printing this out as I type. Now to find a sheet of 36x78in plexiglass…

In case this info helps, here’s how I obtained the 36" x 96" sheet of plastic that my customized table (which has an extended-width version of the Global 1940 map board) needed. I found a local plastics company whose merchandise lines were described on their website, and I determined that the best option was a material called non-glare Acrylite P-99; the company had various sizes in stock, and one of them was originally sized by the manufacturer at 48" x 96" x 1/16" thickness. The 96" length was already correct, so all the plastics company had to do for me was to cut the sheet to the correct width. They then shipped it to me by delivery truck, rolled up into a tube about two feet in diameter with a sheet of cardboard wrapped around it to protect it. They even included the slice they had removed. They only charged me ten bucks for the custom cutting, and they did a nice job; the sheet went straight onto the table without needing any work on my part, other than my peeling away the manufacturer’s thin temporary film which protects the acrylic from scratching during storage and shipment.

@Tjoek It looks awesome. I have access to fancy plotters at work, and I did this on a 36" roll of heavyweight photo paper with a satin finish on maximum quality. It took half an hour, and it is a thing of beauty. I’ll try to get some pics at home.

@CWO-Marc said in Tjoek's 1940 Global Map file (Updated May 30th 2018):

@vodot said in Tjoek's 1940 Global Map file (Updated May 30th 2018):

@Tjoek this is incredible. Printing this out as I type. Now to find a sheet of 36x78in plexiglass…

In case this info helps, here’s how I obtained the 36" x 96" sheet of plastic that my customized table (which has an extended-width version of the Global 1940 map board) needed. I found a local plastics company whose merchandise lines were described on their website, and I determined that the best option was a material called non-glare Acrylite P-99; the company had various sizes in stock, and one of them was originally sized by the manufacturer at 48" x 96" x 1/16" thickness. The 96" length was already correct, so all the plastics company had to do for me was to cut the sheet to the correct width. They then shipped it to me by delivery truck, rolled up into a tube about two feet in diameter with a sheet of cardboard wrapped around it to protect it. They even included the slice they had removed. They only charged me ten bucks for the custom cutting, and they did a nice job; the sheet went straight onto the table without needing any work on my part, other than my peeling away the manufacturer’s thin temporary film which protects the acrylic from scratching during storage and shipment.

Thanks for the tip @CWO-Marc- I actually have 48x48" polycarbonate sheets available to me as well (#engineeringrocks), so I’ll probably pop a couple sheets on the bandsaw and call it good. I’m ok with a physical seam at the Europe/Pacific divide :) I have a teak table that should work as a platform; now I just need a big plywood sheet to set the map on. Maybe one day I’ll have a table to rival some of you crazies with bunkers?

I mean, the pictures are not going to look as nice as the print, and I don’t have a surface yet or the plexiglass cut to size to cover it. I’ll try to get something out in the next few days, though.

@Tjoek Some pics below. They’ve been through Google photos compression and aren’t the raws, but the map still looks great. It is virtually impossible to overstate how clean it is in person. I decided to kill two birds with one stone and also demo some of my custom 3D printed pieces on the map as well- please forgive the shameless cross-promotion :) As I mentioned above, I did this on a 36" HP T850 plotter on heavyweight satin photo paper, on maximum quality, at a feed speed of about 3"/min.

Congrats for your work!

Hi @Tjoek, I hope you don’t mind but I’d like to use your map for this 1940 tracker I’m building. I can see how long you’ve spent cleaning this up, so I would like to add you to the credits if that’s okay.

I think I might have taken some of the tokens you cleaned up already while bulding my prototype. I think they popped up in google image searches, I hope you don’t mind. I plan on sharing freely with the community in a seperate thread once it’s more polished.

Here’s a link with a picture of the board : https://storage.googleapis.com/aa-calkit4me/index.html

And here’s a preview with you image :

As you can see, I’ll need to insert the IPC tracker at the top again (I think it adds a nice touch) and realign a few icons, but you get the gist. I think it would look much nicer.

Thanks in advance,

Kev

Actually, here’s an updated version of the link. The former is no longer active.

https://aa-g40.k2m.ca/