Sired's Map project - Updated- 4/16 - files available see first post

Re: Sired's Map project - Updated- 4/16 - files available see first post

Anyone who knows if it was intended that Sired blood changed the IPC of Celebes from 3 to 4 on his OOB map?

Lompestein, thanks for the complements, pretty much everybody else was underwhelmed. I mounted a 5 ft version on press board I cut into a circle and mounted on a lazy susan so you could spin it. Played twice on it but the guys I played with were interested in the regular maps.

I made this after injuring my leg at work and was immobile for a while. It took a long time, about a couple of months of daily tinkering. I enjoyed it, kept me busy.

What I had to do was cut the map into about 16 to 20 horizontal strips. I didn’t keep the original files they died with an old computer I used. I used the polar function in gimp under distorts to spin the map into a circle.

I would then individually stretch vertically the strips to account for distortions at the outer and inner extremes. Spin unspin adjust, spin unspin adjust.

All the graphics had to be erased before doing this.

Repair all the borders. I also had to tweak individual land masses and continents by cutting them out and pasting them on new clear layers stretch and pull trial and error.

I believe the xcf file still has the graphics on a transparent layer over the map.

Feel free to do whatever you want to it and send me a pic of your results.

My motivation was the Gleason New Standard Map of 1892
https://www.amazon.com/Flat-Earth-Map-Gleasons-Rowbotham/dp/B01GQUW6PO?th=1

There was also a similar map used in WW 2 for people to track the progress of the war at home.

Part 4: Starting the ships, adding decals to the tanks, skin tones on the soldiers

Today spent some time adding paint to the sprayed ships, including painting the water jettisons on the subs black (this was very tricky and ended up looking a little sloppy). Advice for painting the jettisons: toothpicks are not small enough! If you do use toothpicks, you’ll have to dab a dot of black for each tiny jettison.

The battleships were a bit easier, and painting the decks, bridge, and smoke stacks were all done in silver. I plan on adding the final grey coat last after the deck and stacks/bridge dry. I experimented with how to add the national emblem, and will probably opt for a white background with a red dot on the bow of the ship. In the future I may do that with the rear end of the ship.

I painted the tranny smoke stacks silver and added a white background for the emblem on the destroyers. All in all, the Japanese navy is coming along nicely.

The armor is pretty much done. I added a white flag to the front side of the armor and will be adding the red dots later. For the aircraft, I’ll be adding a red band around the rear part of the plane. I was debating between sky blue and red and may alternate just for some variety.

The soldiers got some skin! And I just want to say that adding the paint alone brings out the contours of their facial features in an excellent manner on their own. I may add a touch of black to certain areas of the face but that will be a last step. The next step will be panting their uniforms, rifles, and helmets.

After all this is done, I will be spray painting the japanese bombers white, the aircraft carrier black, and then will add the details to those. The Japanese are about 55% done all in all and I’m pleased with the results so far even if they do look a bit amateurish. Stay tuned.

IMG_6405.JPG IMG_6404.JPG IMG_6403.JPG IMG_6402.JPG

when can i purchase your G40 custom card deck and whats the cost also is there any way I can get the 1 piece map already made and shipped thanx computers are nt my forte they re just a necessary evil for me thanx for all you do

In case this is useful, here’s a page which shows photos of all the sculpt types in A&A 1941 (http://www.axisandallies.org/p/axis-allies-1941-preview-unit-details-and-abilities/) along with a list of how many sculpts of each type are in the game.  Clicking on each picture will give you an enlarged version.

@dazzaman77
Can you email me at trisdin@younggrasshopper.org

@dangermouse650:

@John:

@dangermouse650:

Great work John

Thanks DM.

Where have you been?

Have you been working, as of late?

Yes, work has been very hectic and other life happenings that are keeping me too busy to paint……but keep up with yours your doing great. :-)

Appreciate it DM. I hope you get to paint soon. :-)

John

@DiscoKnekt:

Nice table! Really like the NO cards! We have a problem that people tend to forget what NOs they have so we need some kind of reminder, maybe this is solution! Is there any chance you could share the file for the cards so that i save some time typing them? :)

My NO card deck will be available soon, I will let you know by PM how you can get one when they’re ready.