Sired's Map project - Updated- 4/16 - files available see first post

@Lompestein Awesome work! Big thanks for including the .xcf’s and brushes as well, that should help others get a leg-up on their own projects.

Not much to say just sharing a map I made. As you can see it is heavily inspired by the War Room map, “hand drawn” and set to correspond to the original AA50 map 1:1.
This map is 100 cm in diameter or about 39 and a half inches.

You can see how it fits the units in the “images” section on BGG!

Good luck and have fun!

https://boardgamegeek.com/filepage/237973/new-round-map-ana-50ae-fixed

1.png

And as a bonus the round map for AA - 1941: https://boardgamegeek.com/filepage/237931/new-round-map-ana-1941

Counting TUV, expected losses after a variety of round 1 openers, KJF and KGF both need some viability the additional russian units are necessary for an even remote possibility of KJF, assuming a 6-9 bid for the allies.

A heavily stacked axis map needed more to it going on many fronts. Kept the fun and minus the complete devastation. UK can sink Japan fleet by east indies with a sub bid and an infantry on egypt, the KJF becomes viable, at the same time, japan quickly catches up in income and can knock out india if it gets no support.

Lots of Russian players like to do ukraine, the added artillery smooths it out, Germany has plenty to counter attack no problem, nothing drastic. Taking london with tech roll LRA on round 1 non sense is out of the picture, tech players rejoice, as if LRA is germany is not devastating enough, plus even a carrier in baltic seazone and air on france… forces a huge turtle buy from uk, mitigating some of that still makes the baltic fleet thing strong just not so overwhelming. Basically all the germany strategies need some kind of drawback or investment. Like you should have to work for Africa if you want it instead of just getting it. The high risk high reward battles still there, because it comes under the assumption of an allies bid, even if you play without one there is still something for the allies to look forward to.

One of the key reasons this map is seldom played is because the allies really have nothing to look forward to for the first 3 rounds. So this just addresses that issue, it is still an axis favored map, the allies still have to make something happen, it is just they now have the tools to try to do something.

The germany destroyer may get removed, I added it to make germany 1 a bit more dynamic instead of linear. Players would also send 2 subs to sink usa transports, baltic subs to sink uk bship, go for egypt or protect bship at gibraltar, it is all the same stuff, now you can yolo attack usa and have a pretty even fight, block usa from landing africa, 2 sub sink uk dd trans and 1 dd to hit the cruiser or use dd to sink bship sub from russia, there is more decision making.

TL:DR More decision making for the axis instead of “this is the best option so I got to do this or I can risk this purchase if it does not work out oh well there will be no punishment anyway.”

The best approach I’ve seen was a friend who cut his factories in half with a hacksaw. Large factories are majors, while the smaller, halved factories are minors.

I’ve got mine painted three different colors. Bought a lot of 50 for a few dollars from a vendor at Nashcon in May 2016.

Before Nashcon, I used red Monopoly hotels for the major factories and the green hotels for minor factories. I still like to use the green ones every now and again because I think they’re nifty.

@der-kuenstler

Great looking cards DK.

Regarding prices, here are some quotes that I got from two different Southern California print shops  (I had posted this also on the thread entitled Ambilzi & Grasshopper’s 1940 Global Map)

The first print shop provided the following estimates (note the $52 set up fee):

SET UP:  $52.05 ( digital color file set up, latex printer set up)

48" x 105" vinyl $142.63  print digital color 4/0 on white smooth vinyl (15oz)

48" x 105" canvas  $300.13  print digital color 4/0 on canvas

48" x 105" versa fabric  $273.88  print digital color 4/0 on versa fabric

53" x 116" vinyl  $174.63 print digital color 4/0 on white smooth vinyl (15oz)

53" x 116" canvas $368.13  print digital color 4/0 on canvas

53" x 116" versa fabric $335.88 please note: print cannot be any larger, printing on a 54" rolld

A second set of quotes from a different Southern California printing company for printing on vinyl (the type of material used for advertising banners):

48"x105" ,  white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $230.80

53"x116",    white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $258.78

56"x122.5",  white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $277.42

(I might check on the AliBaba website to see what I can find for printing services in China.  Also, I’m checking on the possibility of printing on upholstery vinyl and marine vinyl).

@sgtwiltan:

Yes. There are so many. Trying to get one thing done at a time. I sent back some pieces and have started on a big batch of artillery which he loves. I’m amazed at his patience. Still have a lot of pieces he sent me and was able to find and keep them in a box so I know which pieces are his that I need to work on. They had been lost in multiple boxes from when I moved 4 years ago. I’ve also redone literally hundreds of PZIIIs including some all of the painted ones. One of these days…… I’ll get them done.

That is cool! I’m sure he doesn’t mind, because the end result is fantastic. :-)