Sired's Map project - Updated- 4/16 - files available see first post

Not much to say just sharing a map I made. As you can see it is heavily inspired by the War Room map, “hand drawn” and set to correspond to the original AA50 map 1:1.
This map is 100 cm in diameter or about 39 and a half inches.

You can see how it fits the units in the “images” section on BGG!

Good luck and have fun!

https://boardgamegeek.com/filepage/237973/new-round-map-ana-50ae-fixed

1.png

And as a bonus the round map for AA - 1941: https://boardgamegeek.com/filepage/237931/new-round-map-ana-1941

Here are my latest ship customizations, the CV-4 Ranger and CV-7 Wasp. These two ships have been missing from my aircraft carrier lineup. Now I have all the US aircraft carriers available from the Lexington class to the Midway class.

The Ranger & Wasp have highly detailed flight decks and authentic hull camouflage. As you can see, the realism is taken to the next level. There simply isn’t anything else like them offered on the market. These look good in pictures but they don’t quite capture the magic of holding one in your hand.

Both are fully magnetized to hold two aircraft.

The Ranger is a 3D print sculpt from EBard Models.

Ranger Angled View - EBard 1200x900.jpg

Ranger Stbd View 1200x900.jpg

Ranger Port View 1200x900.jpg

Ranger Bottom View 1200x900.jpg

The Wasp is also a 3D print sculpt from EBard Models.

CV-7 - Angled View 1200x900.jpg

CV-7 - Port View 1200x900.jpg

CV-7 - Stbd View 1200x900.jpg

CV-7 - Bottom View 1200x900.jpg

Visit my site at A&A Boardgaming and see the entire lineup of US aircraft carriers and more.

@macdown343
Why don’t you use the existing map files or do you want to customrise territory’s ?

Are the arrows small enough to fit on the rudder?
60327_p1_large.jpg

Thank you for both the response and all of the info. Any recommended material to print on? Vinyl seems pretty common so far but I’m not sure if there is better.

Any customization is welcome on this thread.

Your other question would probably go in one or two places.

You can either ask your question on the thread, "other axis and allies variants, "  or the thread, "house rules, " which might be a better place for it.

That would be my guess, but others may have suggestions as well.

I hope that helps. :-)

John

I’ve updated the approximates sizes/scales for some basic and alternate units.  Keep in mind that many classes of ship and aircraft, though in the same class, varied in size so my sizes will be off on some units.  If your like me I want to be able to visually distinguish between units quickly so keeping classes similar in size I find works the best. Below is my guide/attempt to standardize my pieces where they are relatively the same size for their respective class.  I’ve added some alternative classes that I use in my games and ties in some of the alternate pieces that HBG is putting out.  If you need something scaled and not sure how to do it let me know and I’ll do my best to help.

Carrier 6.5 cm 1/3700
Light/Escort Carrier 5cm 1/3100
Battleship 6 cm 1/4000
Cruiser 5.5 cm 1/3700
Light Cruiser 5 cm 1/3400
Destroyer 4.8 cm 1/2400

(cm is for the wingspan)
Heavy Bomber 4.7 cm 1/700
Medium Bomber 3.5 cm 1/600
Light Bomber 1.7 cm 1/600
Heavy Fighter (Twin engine) 2.8 cm 1/600
Fighter 2.2 cm 1/500
Light Fighter 1.7 cm 1/600
Dive/Torpedo Bomber 3 cm 1/500

Those tanks are some of the best AA pieces I’ve ever seen! I really like the extra details added and especially like the matt finish.