Sired's Map project - Updated- 4/16 - files available see first post

@conquisitore
That is the right kind of price!
I might try harder to find someone who can do that for me here

Hello gents,

not sure if this was already discussed here, but is there a place where we can share
AAA related stl files for 3d printing?
Thanks for your help.

Wow. I had inquired in previous threads on this forum and had only been directed to versions that had multiple personal touches on them. This is way better than mine! Lol, I’ll take it though.

Do you have any guidance on printing your own map? I hear neoprene is pretty sharp.

In case this is useful, here’s a page which shows photos of all the sculpt types in A&A 1941 (http://www.axisandallies.org/p/axis-allies-1941-preview-unit-details-and-abilities/) along with a list of how many sculpts of each type are in the game.  Clicking on each picture will give you an enlarged version.

I’ve gotten several private messages and some responses in this thread… so just as a head’s up and a community service…

Because of the private messages, I have ALREADY made a deal to unload my custom units, and they are, in-fact, already mailed off.

I know its kinda pointless now, but if you’re still that curious as to what I did have, here’s the complete list of the custom HBG units I had purchased in the last few weeks to beef up my bins… since I later made a decision to pull them and not use them, I did eventually re-order equivalent numbers of default/original OOB A&A units from HBG to beef up my numbers (like if I didn’t like the two HBG Japanese Fuso battleships, I reordered two OOB Kongo or Yamato battleships to replace them… so-on and so-on.  Anyways, here’s the (now kinda pointless) list:

(BTW: you may notice that for the most part, planes are missing from this list… I found most custom HBG aircraft to be good enough and scaled well enough to survive my “off-scale axe”.  So there are many HBG planes like P-47s and F4F/Hellcats that survived the cut and made it into my permanent bins)

HBG Battle Pieces (custom units)

US - Olive Drab:
5x Pershing Tanks
5x M5 Stuart tanks
15x M4A3 Sherman tanks
5x P-51 fighters

5x Essex CVs
5x South Dakota BBs
2x Nevada BBs
5x Baltimore CAs

UK - Tan:
10x Churchill Tanks
10x Valentine Tanks

5x Ark Royal CVs
3x King George V BBs

Russia - Brown
2x KV-2 tanks
11x T-34 tanks
4x T-26 tanks

German - Black
2x Schleswig Holstein BBs
2x Seydlitz CVs
8x Pz-III tanks

Japan - Pumpkin Orange:
10x Type 97 tanks
5x Ki-43 fighters
2x G8N Rita bombers

2x Kaga CVs
2x Ryujo CVs
5x Nagato BBs
2x Fuso BBs
5x Mogami cruisers
5x I-400 subs

MyHBGrejects.jpg

@WorldWideArmy:

Hi All,

After building a custom table for my global 40 setup I was looking for other maps to use on the table.

Surprisingly I found there aren’t really any available in this size so I decided to spend a bit of time creating them from some of the great resources available.

If your looking for a copy of AA50 that fits your game table, you are in luck sir!

Download it here:

-http-boardgameconsole.com/AA50(Printable)32x70.pdf-

I’m considering building Guadalcanal next… what do you all want?

Frank

This link is broken…

If you are really looking for a good finish on all your HBG pieces, you could buy a couple small cans of differing lacquers and test each one. $20 should get almost 3 cans worth. It may be a waste to some degree, but at least you can know for sure which one works best.

I have a flat Testors lacquer/sealant spray that I used on Tall Paul’s finished pieces. Granted, these were painted first, so the effect may be thrown off. However, I will say that I did not observe any level of gloss on the HBG or OOB pieces after I applied it. It was quite flat as advertised. FWIW.

Counting TUV, expected losses after a variety of round 1 openers, KJF and KGF both need some viability the additional russian units are necessary for an even remote possibility of KJF, assuming a 6-9 bid for the allies.

A heavily stacked axis map needed more to it going on many fronts. Kept the fun and minus the complete devastation. UK can sink Japan fleet by east indies with a sub bid and an infantry on egypt, the KJF becomes viable, at the same time, japan quickly catches up in income and can knock out india if it gets no support.

Lots of Russian players like to do ukraine, the added artillery smooths it out, Germany has plenty to counter attack no problem, nothing drastic. Taking london with tech roll LRA on round 1 non sense is out of the picture, tech players rejoice, as if LRA is germany is not devastating enough, plus even a carrier in baltic seazone and air on france… forces a huge turtle buy from uk, mitigating some of that still makes the baltic fleet thing strong just not so overwhelming. Basically all the germany strategies need some kind of drawback or investment. Like you should have to work for Africa if you want it instead of just getting it. The high risk high reward battles still there, because it comes under the assumption of an allies bid, even if you play without one there is still something for the allies to look forward to.

One of the key reasons this map is seldom played is because the allies really have nothing to look forward to for the first 3 rounds. So this just addresses that issue, it is still an axis favored map, the allies still have to make something happen, it is just they now have the tools to try to do something.

The germany destroyer may get removed, I added it to make germany 1 a bit more dynamic instead of linear. Players would also send 2 subs to sink usa transports, baltic subs to sink uk bship, go for egypt or protect bship at gibraltar, it is all the same stuff, now you can yolo attack usa and have a pretty even fight, block usa from landing africa, 2 sub sink uk dd trans and 1 dd to hit the cruiser or use dd to sink bship sub from russia, there is more decision making.

TL:DR More decision making for the axis instead of “this is the best option so I got to do this or I can risk this purchase if it does not work out oh well there will be no punishment anyway.”