Customized (mass) Unit Markers

@The-Captain
I used 3mm thumb nuts drilled out to fit 3mm acrylic rods. I used a number of 3d printed jigs for cutting the rods, assembly of the stands and gluing the magnets. If I remember later I’ll attached some pictures of the jigs/stands

@LebaneseWarlord said in Need advice for custom dice DIY:

I’ve recently bought 96 dice because I wanted to make custom hit/miss dice for Global 40. I bought these dice from amazon and they’re plain blank and white dice.

I don’t have a lot of experience with DIY projects but I have access to a lot of good tools so I’m looking for advice regarding techniques on how to mark and repaint the dice I bought.

For the marking, I was thinking about using a rotary tool to carve a little dot.

The real challenge is the painting. I looked a lot on internet and I can’t seem to find a technique for painting on plastic that everyone agrees on, but here’s what I have so far.

Wash the dice to remove any grease that could be on the surface Use very fine sandpaper or some sort of abrasive to remove the protective finish that is on the dice right now and offer a better surface for the new paint to stick Wash the dice again the remove the dust from the paint removal Apply one or a few (I’m not sure about this one, I’ll read what is suggested on the can) of primer Apply a few thin layer of the color I want on the dice Paint a white dot in the carving I made earlier with a fine brush Apply one or a few (not sure about this one either, something will be suggested on the can) of clear finish to protect the paint

Any correction or suggestion would be very welcome!

Guys use RIT dye for color. Go to Siredblood’s custom dice you tube video. Shows how he used a jig to spot hole dice and then dye them

Hey Everyone,

Here is our progress on this project as of August 1st 2017…
https://www.youtube.com/watch?v=AL1avCMC_i0

Cheers!

I have glued together 6 chips to make the stack, primed + painted, then added turf/grass on top, and last the painted piece. I didn’t want to use something that could be confused with units in the game, so i chose some random colors…

The nations roundel is fairly quick to paint, and once you get the technique right (holding brush + type of brush) its easy. My global units set is just over 1600 pieces, all have nations markers :)

The large piece where you place all your units is made of a wooden disc, with speck/filler + turf/grass + some “realistic water” (transparent acrylic medium, basically paint with no color/pigment)

Fenris

I was guided to this site by a YouTube subscriber, it has some interesting options for trays.

http://www.toolstation.nl/shop/Opbergen/d60/Assortimentskisten+%26+dozen/sd3147

@John:

@kcheu:

yes, i know.�  I used to paint small pewter figures for a different game (it’s a D&D nerd here) and because I enjoyed painting them so it might definitely be up next.

I’ve played D&D as well. We are all nerds here, LOL! :-D

Speak for yourself… I’m a geek (which are a lot cooler than nerds).

Paul - yeah… I applaud your stance on transport planes being separated from bombers.  I couldn’t agree with you more - my own rule is purely for simplicities sake for my 50th, it actually kinda bothers me still.  I only play A&A with my ‘old crews’ about twice a year (when I visit the states), otherwise my 50th hosts some players that haven’t played nearly as long as us - though all are interested in WWII history.  So I have to try and keep the piece differentiations to minimum.

George - no worries, they’re Italians so they should get a long with my guys  :wink:
Fantastic collection!  Like the individuality that those figs offer - I don’t own any, so are they pretty much the same size as the OOB?  Looks like it (except for the stands of course).  Gotta love those SS!  “HOLD ZE LINE!”
That one Italian bomber… would never thought that shade of orange could be pulled off, but it looks pretty cool.  Might have to give that one a try.

––Calling “Viracocha”----

––My friend,…it’s been way too long since I’ve heard from you. I ALWAYS enjoy my conversations with you.

Tall Paul