B17's up close and personal

jwo1984

jwo1984

…

jwo1984

…

jwo1984

…

b17 front blue close.jpg_thumb

jwo1984

…

cyanight

Fantastic! Â Those are incredible my friend. Â They look so real :)

jwo1984

…

jwo1984

sorry I posted two of the same topics guys…was having issues with a broken link message now I cant delete the other topic.

Thanks cyanight! I was happy with how they turned out…if you can get a good cockpit going these pieces can really pop out in terms of the realism. lookin forward to seeing the rest of your Amerika units!

jwo1984

…

jwo1984

…

b17 fromation.jpg_thumb
b17 fromation.jpg_thumb
b17 fromation.jpg_thumb
b17 fromation.jpg_thumb
b17 fromation.jpg_thumb
b17 fromation.jpg_thumb
b17 fromation.jpg_thumb
b17 fromation.jpg_thumb
b17 fromation.jpg_thumb
b17 fromation.jpg_thumb
b17 fromation.jpg_thumb
b17 fromation.jpg_thumb
b17 fromation.jpg_thumb

Spitfire38

I’m always amazed by the paneling work on your planes. Very crisp. Is that just watered down black paint? The lines look very faint.

Thanks for sharing!

jwo1984

@Spitfire38:

I’m always amazed by the paneling work on your planes. Very crisp. Is that just watered down black paint? The lines look very faint.

Thanks for sharing!

Thank you spitfire…I guess we all have our favs to paint im just really into the planes of the game! Yes I really just water down my black acrylic. I ve never used washes yet always just watered down my colors. From there its just patience and a very fine tipped brush. I try not to make the lines too dominating…but on the shiny chrome metal of the b17 they really pop out!

Are you still working on JB’s big project? anything coming up in the new year from your studio? Always have enjoyed your showcases!

John Brown

jwo, these are incredible. Cyanight, they look like they are real. Super fan of your work.

Spitfire will have the Pacific done, probably, in the next few weeks. He will probably take pictures of them, and I will take some on my global metal map.

It will be awhile before I have some, but I will post some as I do them, at a later date.

Good to have you back. Merry Christmas, and hope you have a happy New Year. :-D

John

jwo1984

@John:

jwo, these are incredible. Cyanight, they look like they are real. Super fan of your work.

Spitfire will have the Pacific done, probably, in the next few weeks. He will probably take pictures of them, and I will take some on my global metal map.

It will be awhile before I have some, but I will post some as I do them, at a later date.

Good to have you back. Merry Christmas, and hope you have a happy New Year. :-D

John

Thanks JB! Glad you like them… Only problem wit painting more bombers now is I’ll dump more ipcs on risky strategic bombing raids over Germany and Japan ! Haha

Glad to hear the next big phase of your custom painted units is coming up on deck. Looking forward to seeing them!

Spitfire38

The watered down black works well. I have decided against washing my planes, as I feel like it doesn’t turn out well.

One effect that I really like but haven’t figured out how to replicate is the powder burns where the cannons would be on the fighter jets. For example, the P-50 Mustang or the Spitfire have a few .50 cals that look very snappy if you put some powder burns on the wings. It really brings a sense of realism if you do it right, but it’s difficult to pull off without overdoing it.

@jwo1984:

Are you still working on JB’s big project? anything coming up in the new year from your studio? Always have enjoyed your showcases!

Yes, I am coming along with JB’s project! The semester is over, so I have some more time to get work done. The air force and navy are done except for the decals, and the rest are coming shortly. JB’s schemes he picked are turning out nicely, so hopefully I’ll have some good work to show you all soon! Thanks for posting your pieces in the interim.

GiddyXray

Nice job!

dangermouse650

Nice work, time consuming and needing a very steady hand, well done

LHoffman

Holy crap those B-17s are nice. Amazing work man.

@Spitfire38:

One effect that I really like but haven’t figured out how to replicate is the powder burns where the cannons would be on the fighter jets. For example, the P-50 Mustang or the Spitfire have a few .50 cals that look very snappy if you put some powder burns on the wings. It really brings a sense of realism if you do it right, but it’s difficult to pull off without overdoing it.

Spitfire…

Yeah, I agree. Here are a couple that I did a while back for Tall Paul. He wanted his Marine Corps fighters to have a more used/worn look.

http://www.axisandallies.org/forums/index.php?topic=26127.msg1158351#msg1158351

He requested the powder stains on the top of the wings, though I believe they would be more pronounced on the bottoms. Literal downside is that you can’t see them on the bottom though. I even did a little bit on the engine cowling (from oil leaks/wear), which I think added a nice touch. It is hard to notice on these planes though, so in the future I may darken it up a bit.

It is difficult to do in a subtle manner. Upon re-evaluation of my technique here, I would tone it down a bit or diffuse the effect for the guns. I used a watered down black ink, but even then you have to be extremely conservative on how much you apply. It is perhaps easier with fighters because you can pinpoint their guns more easily than you can a bomber. You want it to be noticeable, but not stark. It is a fine line to be sure.

jwo1984

@LHoffman:

Holy crap those B-17s are nice. Amazing work man.

@Spitfire38:

One effect that I really like but haven’t figured out how to replicate is the powder burns where the cannons would be on the fighter jets. For example, the P-50 Mustang or the Spitfire have a few .50 cals that look very snappy if you put some powder burns on the wings. It really brings a sense of realism if you do it right, but it’s difficult to pull off without overdoing it.

Spitfire…

Yeah, I agree. Here are a couple that I did a while back for Tall Paul. He wanted his Marine Corps fighters to have a more used/worn look.

http://www.axisandallies.org/forums/index.php?topic=26127.msg1158351#msg1158351

He requested the powder stains on the top of the wings, though I believe they would be more pronounced on the bottoms. Literal downside is that you can’t see them on the bottom though. I even did a little bit on the engine cowling (from oil leaks/wear), which I think added a nice touch. It is hard to notice on these planes though, so in the future I may darken it up a bit.

It is difficult to do in a subtle manner. Upon re-evaluation of my technique here, I would tone it down a bit or diffuse the effect for the guns. I used a watered down black ink, but even then you have to be extremely conservative on how much you apply. It is perhaps easier with fighters because you can pinpoint their guns more easily than you can a bomber. You want it to be noticeable, but not stark. It is a fine line to be sure.

I think your examples turned out pretty good Hoffman! If you perhaps weathered your hellcats abit on the blues…maybe some silver chipping exposed, or a light wash to dirty them ever so slightly it would help die down some of the aggressiveness of the powder stains so they don’t pop out as much. Just making the plane look more used and rugged from some pacific sorties! but overall there is some nice fading black there with your brush. P51’s have a lot of that un painted aluminum chrome to there colors could make the powder gun marks look nice …however the HBG mustangs I have painted are quite small and only way to do it with notice is to make the stains larger…but then it takes over the wing too much IMO. Maybe spitfire will have better luck then I did.
Has anyone painted any p47 “jugs” yet from the HBG American expansion set?? I really wanna try the checkered style look you see on some of the noses of them but it might just be way to hard

Spitfire38

@LHoffman:

Holy crap those B-17s are nice. Amazing work man.

@Spitfire38:

One effect that I really like but haven’t figured out how to replicate is the powder burns where the cannons would be on the fighter jets. For example, the P-50 Mustang or the Spitfire have a few .50 cals that look very snappy if you put some powder burns on the wings. It really brings a sense of realism if you do it right, but it’s difficult to pull off without overdoing it.

Spitfire…

Yeah, I agree. Here are a couple that I did a while back for Tall Paul. He wanted his Marine Corps fighters to have a more used/worn look.

http://www.axisandallies.org/forums/index.php?topic=26127.msg1158351#msg1158351

He requested the powder stains on the top of the wings, though I believe they would be more pronounced on the bottoms. Literal downside is that you can’t see them on the bottom though. I even did a little bit on the engine cowling (from oil leaks/wear), which I think added a nice touch. It is hard to notice on these planes though, so in the future I may darken it up a bit.

It is difficult to do in a subtle manner. Upon re-evaluation of my technique here, I would tone it down a bit or diffuse the effect for the guns. I used a watered down black ink, but even then you have to be extremely conservative on how much you apply. It is perhaps easier with fighters because you can pinpoint their guns more easily than you can a bomber. You want it to be noticeable, but not stark. It is a fine line to be sure.

Thanks for the link. Those are the pieces I was thinking of.

Like you said, diffusing it even more would likely be a good idea. I think it would be more forgiving if the plane was more weathered and dirty in general, as jwo1984 was pointing out. When I get around to painting some of my own pieces I’ll probably try it out!

B17's up close and personal

Featured Topics

T-shirts, Hats, and More

Suggested Topics

WinterAdler's Customization - G40 Setup Card Deck & more

AlphaKappa's improved G40 map graphics

HBG's new U.S. Expansion Set

Bi-Plane's for Global 39

Cyanight's Customizations

Toblerone77's Paint Warfare.

"Tall Paul's" RUSSIAN units, detailed & painted by the "WARMACHINE Team"

Germans, I.C.s, AA-Guns Painted

32

18.0k

40.7k

1.8m