Simple DIY table top for A&A G40 (video)

Greeting from the Philippines! (Me and my local tabletop organization started a small group of Axis and Allies players.) I just wanted to share the modifications I’ve made in Tabletop Simulator to play Global 1940 with as many quality of life features that I could stuff into it. The dream is to get a physical copy of the game once I figure out how to import both 1940 2nd ed. copies. If people are interested i can send the save files over Steam or even start a game if time permits.! If you guys can give any recommendations to better the simulation or on how to get a physical copy of G40 I’m open to try them out :D

Overall V5
2019-04-20 (2).png

V6 close up pics

20190420211639_1.jpg 20190420211633_1.jpg 20190420211616_1.jpg 20190420211604_1.jpg 20190420211722_1.jpg 20190420211656_1.jpg 20190420211647_1.jpg

Lompestein, thanks for the complements, pretty much everybody else was underwhelmed. I mounted a 5 ft version on press board I cut into a circle and mounted on a lazy susan so you could spin it. Played twice on it but the guys I played with were interested in the regular maps.

I made this after injuring my leg at work and was immobile for a while. It took a long time, about a couple of months of daily tinkering. I enjoyed it, kept me busy.

What I had to do was cut the map into about 16 to 20 horizontal strips. I didn’t keep the original files they died with an old computer I used. I used the polar function in gimp under distorts to spin the map into a circle.

I would then individually stretch vertically the strips to account for distortions at the outer and inner extremes. Spin unspin adjust, spin unspin adjust.

All the graphics had to be erased before doing this.

Repair all the borders. I also had to tweak individual land masses and continents by cutting them out and pasting them on new clear layers stretch and pull trial and error.

I believe the xcf file still has the graphics on a transparent layer over the map.

Feel free to do whatever you want to it and send me a pic of your results.

My motivation was the Gleason New Standard Map of 1892
https://www.amazon.com/Flat-Earth-Map-Gleasons-Rowbotham/dp/B01GQUW6PO?th=1

There was also a similar map used in WW 2 for people to track the progress of the war at home.

@AlphaKappa:

I don’t like the large size of the OOB Dauntless tactical bomber piece.  I am considering replacing them with the HBG P-47 Thunderbolt or Helldiver.  What are the sizes of these pieces?   The P-47 looks bigger than a typical fighter.  Would it work as a tac?

I have the HBG P-47 fighters… they are the same size as the OOB fighters… by comparison, they are bigger than the HBG P-51, which is actually smaller than OOB fighters.  If you’re expecting the HBG P-47 to be as big as OOB Tac Bombers, you’ll be disappointed.

@cyanight:

I have no idea when the German set will ship. I think it was supposed to ship in late spring. Once the pre-orders are filled you can buy the set or groups of 5 pieces. I paint all my pieces so I could care less about color.

I checked the site out… German Set 3 is supposed to be out in “April”… so if that’s true, they got a 30 day window coming up.  Pre-Orders are “sold out”, which is worrisome to someone who didn’t get a pre-order in (c’est moi)… so no clue when the set will be available again or individual sculpts can be ordered, but I’d definitely like a lot out of that set. The Deutschland class pocket battleships would be sweet… hopefully they are sized as Cruisers and not as Battleships… and of course the ubiquitous Pz-IV is a must.  Surprised it’s taken all these years to get a Pz-IV.

This may sound like an improbable source, but another idea would be for you to go to some local dollar stores and look around.  Back when I was making myself a dice tower, I discovered that some dollar store chains sell (among all the miscellaneous stuff they have in stock) some plain unpainted rectangular wooden trays of various sizes, made of very thin wood.  Their designs could not be simpler – a bottom and four sides glued together, all made of flat wooden pieces – and they’re cheap in both price and appearance, but they’re about the right size for what you have in mind and they would probably look quite nice if you applied some dark wood stain to them.  And because they’re so inexpensive, picking up as many as you need for your table would be very affordable.  It would also be easy to customize them by, for example, subdividing the larger models into sections by cutting some balsa wood sticks (or other types of woods) to suitable sizes and gluing them inside the trays before you stain them.

That’s a nice set-up!  While there’s a lot of really great tables out there. I’m one of those guys that really just doesn’t have the space for a huge table. This is nice. Good job friend!

@Intrepid:

/how’s that for my 3rd and 4th posts ever, haha! Been a member of this forum since 2007, but I’m the ultimate lurker (mostly because I know I’m too easily tempted to get long-winded!)

You have exercised an extreme amount of restraint posting 4 times in almost 10 years. Glad you chimed in here.

No official news; might have to buy some blanks and customize myself.

Will pass on any new suggestions to the site.