Cyanight's National Objective Cards from Artscow

@CorporalClegg Thank for your reply.
Yes I did see those, but i thought I didn’t need two separate versions and I am very fond of your layout. So if you one decide to make the last 4 cards to play global, and you would like to share please let me know :-)

I’m using Adobe Photoshop CS6.  The textures that I made for the neutrals are partially “from scratch” and partially “stitched together” (and color corrected) from other areas of the map.

If you are really looking for a good finish on all your HBG pieces, you could buy a couple small cans of differing lacquers and test each one. $20 should get almost 3 cans worth. It may be a waste to some degree, but at least you can know for sure which one works best.

I have a flat Testors lacquer/sealant spray that I used on Tall Paul’s finished pieces. Granted, these were painted first, so the effect may be thrown off. However, I will say that I did not observe any level of gloss on the HBG or OOB pieces after I applied it. It was quite flat as advertised. FWIW.

@coachofmany:

@AlphaKappa:

@Buran:

I have just received my US units I have attached some photos.  I was just wondering if what the fifth air unit is?  It looks like an F6F Hellcat fighter.  But there is nothing on the website about it.

Nice!  They look pretty good.  How’s the color compared to the OOB stuff?

HBG Olive Drab color is very close to Global 40 2nd Edition IMHO.

I don’t know, Coach!  I just bought a few of your new Shermans from a friend and I was pleasantly surprised that they match my 1st Edition US pieces pretty well.   :wink:

These Sherman sculpts are ace.  You guys did a good job with these and now I’m looking forward to getting some of the other ones too.

EDIT:  Okay, upon closer inspection in daylight, I changed my mind.  They are definitely closer in tone to 2nd Edition US.

@dangermouse650:

@John:

@dangermouse650:

Great work John

Thanks DM.

Where have you been?

Have you been working, as of late?

Yes, work has been very hectic and other life happenings that are keeping me too busy to paint……but keep up with yours your doing great. :-)

Appreciate it DM. I hope you get to paint soon. :-)

John

The best approach I’ve seen was a friend who cut his factories in half with a hacksaw. Large factories are majors, while the smaller, halved factories are minors.

I’ve got mine painted three different colors. Bought a lot of 50 for a few dollars from a vendor at Nashcon in May 2016.

Before Nashcon, I used red Monopoly hotels for the major factories and the green hotels for minor factories. I still like to use the green ones every now and again because I think they’re nifty.

Regarding prices, here are some quotes that I got from two different Southern California print shops  (I had posted this also on the thread entitled Ambilzi & Grasshopper’s 1940 Global Map)

The first print shop provided the following estimates (note the $52 set up fee):

SET UP:  $52.05 ( digital color file set up, latex printer set up)

48" x 105" vinyl $142.63  print digital color 4/0 on white smooth vinyl (15oz)

48" x 105" canvas  $300.13  print digital color 4/0 on canvas

48" x 105" versa fabric  $273.88  print digital color 4/0 on versa fabric

53" x 116" vinyl  $174.63 print digital color 4/0 on white smooth vinyl (15oz)

53" x 116" canvas $368.13  print digital color 4/0 on canvas

53" x 116" versa fabric $335.88 please note: print cannot be any larger, printing on a 54" rolld

A second set of quotes from a different Southern California printing company for printing on vinyl (the type of material used for advertising banners):

48"x105" ,  white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $230.80

53"x116",    white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $258.78

56"x122.5",  white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $277.42

(I might check on the AliBaba website to see what I can find for printing services in China.  Also, I’m checking on the possibility of printing on upholstery vinyl and marine vinyl).

These are amazing, keep up the great work.