DM making a comeback

@hopper1999 I’ve access to both resin and PLA printers, and while resin has a couple of extra steps compared to PLA, I wouldn’t consider it painful. I’ve come to appreciate resin’s ability to show detail even in very small scale. For me its worth the extra steps to clean and cure, for those results. What’s great is there are so many free units available, with some simple editing/converting you can quickly build cool armies.
As for casting, while I haven’t casted any A&A parts yet (still building my unit library), I have casted a lot of 3.75 action figure parts. I’ve gotten best results using a syringe and pressure pot. (I converted a old paint pressure tank). You inject your mold, and then put it under pressure, I’d do around 30psi, to help the resin into the thinner parts of the mold and prevent bubbles. It also helps, when making your mold to put it under pressure as well. I’ve found it helps prevents bubbles in the silicone and between the silicone and the part being cast.
I plan on using casting to duplicate units I already have, that I can’t find stl files for.

Concerning design and layout with customized game boards, we made a hand-made drawing - gave it to a professional company - made a great deal - and mass produced the game boards to reduce costs.
A&A Classic 2.JPG A&A Revised 2004, 1.JPG A&A Revised 1.JPG A&A Revised 9.JPG A&A Revised 10.JPG

@AlphaKappa:

I’ve been looking for a control tower for air bases.  Good luck with your molds!  Hope that comes out well.

Thanks! Ill be sure to post them, as well as offer them if anyone would be interested. I moved here (CA) from WA awhile back, I knew where to get all that casting stuff, ive looked here, cant seem to find anywhere locally… ordering online is murder, shipping jugs of liquid… in addition, not sure what im getting. I may end up using fiberglass resin, something this small, should be fine… just takes long to cure and I gotta make a grip, unlike the casting resins, takes like 30 seconds.

So recently , i decided to make a new version of AA based in 1940. I need someone to finalize a map for this. I do not have the tech know how or the software required to make this a reality. This map will be released to the masses and you will be credited as the map desginer.

I’m not aware of such a blank outline map existing.  Your best option might be to cover the game map with several taped-together sheets of clear acetate (the kind used for purposes like overheard projection) and trace the borders with a felt pen to produce a blank outline.  You’d then have various options for transfering this outline to the wood surface.  A low-tech method would be to cover the wood surface with sheets of carbon paper (if you can still find any, since it’s gone out of style), place your acetate outline over the carbon paper, then trace over the borders with a hard pencil.  Alternately, you could scan or digitally photograph your acetate outline and use that as the printing file you mentioned.

@CWO:

@Fishmoto37:

Flags to designate armies to place on army cards off the board.

Very nice.  Is there any particular reason why the Russian tank is flying the ensign of the Soviet Navy?

That matches up with an army (navy) off board card that I was using in the Barbarossa game. No navy in that so just used for army. No other reason.

I have them formatted to avery .75 round labels. see house rules ( pieces and where to get them)

Sorry can’t help you with this one.  I have no talent in this matter…