Do you know DTROY?

Has anyone ever considered designing a 3d printable battle box replacement? I’m thinking that may be a good solution that would be much more durable than the cardboard version. I’ve never designed anything for printing so not sure how difficult it would be.

@The-Captain
I used 3mm thumb nuts drilled out to fit 3mm acrylic rods. I used a number of 3d printed jigs for cutting the rods, assembly of the stands and gluing the magnets. If I remember later I’ll attached some pictures of the jigs/stands

@SeaYa I might do that physical option. It’s a split nine to ten hour with two stops, one down and one back. That would work pretty well, if a bit different.

Quite nice.
Couple questions, if you’re willing.

Where did you order this from once you sent them the PDF image to print? Where did you get the silhouettes you used to make the images in each of the hit number categories?
I am particularly interested in finding the various silhouettes you used. Please share that if you’re willing.
Thanks,
Chris

UPDATE: Added an overlay that redraws the border between sea zone 37 and 38, uniting the Andaman Sea and the Malacca Strait and causing SZ 37 to border Sumatra for the first time.

alt text

I remember that this isn’t a fie that can be shared. He basically took an actual map and added decals and created the areas with markers. So its a “one off” map.

I plan on printing some out from Siredblood’s link.  I watched his video and you can certainly do it that way.  My only concern with adhesive backed “stickers” is that with all the handling of game pieces, I can imagine that the stickers begin to peel up after a while. If you’re going to use the adhesive backed stickers, might I recommend to apply thin CA glue around the outside edge of the sticker after you’ve burnished it down on the carrier deck.  You can get some thin CA at your local hobby shop where they sell RC planes, or just order it online.  Because it is literally as thin as water, you’ll need to apply it with some sort of makeshift precision applicator.  But after that, you won’t have to deal with annoying stickers that don’t want to stay down tight.

Also, if you use a glossy type sticker paper, after you’ve applied it and the carrier is “all done”, spray the entire piece with a light coat of Testor’s Dullcote spray laquer.  You’ll get rid of the sheen both on the plastic and from the glossy paper. All the colors will “blend” together and the piece will look much better.  :wink: