John Brown's Painted Axis and Allies Pieces

November Update: Pictured below are some of the new designs and things in the shop, including four new colors and four new units:

Colors:

China Lime Green UK Light Tan/Beige Dutch Bright Orange French Blue

Units:

LCVP “Higgins” boats M3 Stuart Light Tanks GMC “Jimmy” CCKW 2 1/2 Ton trucks Kriegsmarine Type IX U-boats

IMG_7373.JPG

These and most of my other prints are $0.60 per model or less! Come check them out, and let me know if you have more ideas below.

As always, A&A forum members can use coupon code AADOTORG21 for 10% off your order for the rest of 2021: www.etsy.com/shop/NathanDetr0itDesigns?coupon=AADOTORG21

Some painting I did on my original pieces.
Japanese Navy.JPG Italian Navy.jpg Bismark.jpg

@cavestone I also use vallejo paints. The key question here is are you brush painting, or using an airbrush, or both?

The Vallejo paints have a “Model Air” line that comes pre-thinned. You can buy a thinning product (from them) to add to the “Model Color” series paints, which are the exact same thing, just more concentrated and thicker.

If you’ve never used an airbrush, its a bit finicky–it requires regular cleaning and a without a good brush and compressor the paint will flow very inconsistently. The process will be very frustrating unless you use the pre-thinned paints because the brush can only blow paint that is within a certain set of thickness parameters that are difficult to achieve, especially if you are trying to mix the air in the brush’s reserve or in small quantities. That’s why having copies of both Model Air and Model Color is fine by me–unlike Warhammer 40K I’m using primarily earthy colors, greens, dunkelgelb and dunkelgrau… other AFV and camoflage colors and so i don’t need a collection of primary or bright colors.

But I recommend it. The airbrush creates a sublime, beautiful layer and slight mix variations can be used to create shadows, grades, etc. Then you go back over with your brush, adding highlights, lines, details. Then, back over again with a drybrushing…then back to the airbrush to blast Flory Wash all over it.

Can’t see your photos, you can’t post photos until you have a certain post count. I wouldn’t use water to thin paints, they are water soluble but the mix and viscosity is all wrong (though water is obv. cheap and easy to clean up)

As for oil-based paints, these require thinner to clean up, they are much more difficult to drybrush with and are not used for airbrushing. The days of the old testors paints is long behind us–even apple barrel paints are easier to work with and cheaper. The early painting methods were much more about glomming thick layers of paint onto lead miniatures and the modern approach with water based paint and a series of different techniques creates much better results.

@Imperious-Leader said in Axis & Brollies : Action Cards and Event Cards:

you should set it up with card decks made at “Artscow” or something like it in terms of name. They are sold as long as you set up account and you will earn a bit of change

Also consider:
www.makeplayingcards.com was recently (2019) used successfully by siredblood to produce his “Blood Bath” A&A version card deck - at a resulting fair price for consumers

drivethrucards.com was recently (2018) used successfully by Young Grasshopper to produce his co-deck “Omaha” and “Utah” cards for A&A G’40 - at an absolute steal of a deal for consumers

If you have not already done so, please consider selling your deck(s) at either or both sites - I would love to see you get paid for your work.

@jwo1984:

hey guys, so I was searching some camo desert schemes for HBG’s Valentine medium tank and came across this one. � However looking at the sculps I knew it would be tough to paint these blue lines in because most of the tank is all track! so I cut out and shaped some track guard armour like the photo below just using some clear flexible plastic and glued in too the sides…making these two tanks mk II’s which look to have had the side armour as a pose to the Mk V that HBG has sculpted.

I’m sure whatever you do too it, it will turn out great. Can’t wait too see it painted. Good luck buddy! :-D

I’m remembering the days when Table Tactics was the top of the line expansion for Axis and Allies. When '14 was announced i went crazy trying to find the WW1 pieces. I’m still looking.

@BJCard:

@Swedo:

Thank you, im not happy with the US star, i hate doing stars, they always look crooked. Tobad my russian carriers will probably never see action :(

You could just houserule a Russian carrier starting in the Baltic- hey, it is your house, your rules!

Awesome!

Heyo Paul,

I’ll look around… I think I have some A&A pics I never posted, I’ll slap 'em on here.  Been painting other figs more recently (when I actually have time :|).  You have any pics of your cool minis during a game?  I think it would be cool to see them ‘in action!’.