John Brown's Painted Axis and Allies Pieces

Part 4: Starting the ships, adding decals to the tanks, skin tones on the soldiers

Today spent some time adding paint to the sprayed ships, including painting the water jettisons on the subs black (this was very tricky and ended up looking a little sloppy). Advice for painting the jettisons: toothpicks are not small enough! If you do use toothpicks, you’ll have to dab a dot of black for each tiny jettison.

The battleships were a bit easier, and painting the decks, bridge, and smoke stacks were all done in silver. I plan on adding the final grey coat last after the deck and stacks/bridge dry. I experimented with how to add the national emblem, and will probably opt for a white background with a red dot on the bow of the ship. In the future I may do that with the rear end of the ship.

I painted the tranny smoke stacks silver and added a white background for the emblem on the destroyers. All in all, the Japanese navy is coming along nicely.

The armor is pretty much done. I added a white flag to the front side of the armor and will be adding the red dots later. For the aircraft, I’ll be adding a red band around the rear part of the plane. I was debating between sky blue and red and may alternate just for some variety.

The soldiers got some skin! And I just want to say that adding the paint alone brings out the contours of their facial features in an excellent manner on their own. I may add a touch of black to certain areas of the face but that will be a last step. The next step will be panting their uniforms, rifles, and helmets.

After all this is done, I will be spray painting the japanese bombers white, the aircraft carrier black, and then will add the details to those. The Japanese are about 55% done all in all and I’m pleased with the results so far even if they do look a bit amateurish. Stay tuned.

IMG_6405.JPG IMG_6404.JPG IMG_6403.JPG IMG_6402.JPG

Thanks for all the responses, folks - exactly what I needed to hear.

I’ve always had a problem with HBG’s “orange” Japanese units not being of the same tone of orange from OOB A&A… most other colors of custom HBG units seem to match pretty good, but that orange always seemed off to me… so much so I’ve never kept a custom HBG Japanese unit in my nation bins… sad, cuz I really like some of them.

(and yes, I’m one of those anal-retentive guys where if the color is just off a tad, it “ruins” it for me… I know I’m odd that way).

P.S.
Dang, I just realized this forum won’t let you use the first three letters of Japanese units without blanking it out as a profanity.

jwo1984 & Others,

––This thread shows how the Shipyard was made by Ebard re-designing his Dry Dock, adding a large wharf area, adding a second crane, several warehouses, storerooms, and supplies to the dock area including some pics of the finished painted units. Enjoy, and ask any other questions you might have.
––It Also shows his Small Naval Base and Air Base (straight) units.

Tall Paul

Regarding prices, here are some quotes that I got from two different Southern California print shops  (I had posted this also on the thread entitled Ambilzi & Grasshopper’s 1940 Global Map)

The first print shop provided the following estimates (note the $52 set up fee):

SET UP:  $52.05 ( digital color file set up, latex printer set up)

48" x 105" vinyl $142.63  print digital color 4/0 on white smooth vinyl (15oz)

48" x 105" canvas  $300.13  print digital color 4/0 on canvas

48" x 105" versa fabric  $273.88  print digital color 4/0 on versa fabric

53" x 116" vinyl  $174.63 print digital color 4/0 on white smooth vinyl (15oz)

53" x 116" canvas $368.13  print digital color 4/0 on canvas

53" x 116" versa fabric $335.88 please note: print cannot be any larger, printing on a 54" rolld

A second set of quotes from a different Southern California printing company for printing on vinyl (the type of material used for advertising banners):

48"x105" ,  white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $230.80

53"x116",    white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $258.78

56"x122.5",  white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $277.42

(I might check on the AliBaba website to see what I can find for printing services in China.  Also, I’m checking on the possibility of printing on upholstery vinyl and marine vinyl).

Does he happen to have a website or other example of work?

@Tall-Paul amazing craftsmanship

@BluGerman:

today i managed to read through this year long forum thread and I have to ask what happened after November 17th 2011?.. did everybody in this forum mysteriously dissapear? or was it just discontinued? or was it moved to another forum thread or something?.. somebody please let me know because I was really excited to see Allworks whole board with his miniatures (they are awesome!)

In answer to your question- I don’t really know.  :? Allworkandnoclay is an artist who does all sorts of other work for money, not just Axis and Allies. I presume that he moved on to other work, as his Flickr account shows him doing some sculpting and what not. To be honest though, he stopped posting pics, people stopped commenting, and it sort of fell of the face of the earth. There’s some stuff on TallPaul’s page, and there are plenty of other artists with some awesome stuff if you need your daily fix of painted minis!