John Brown's Painted Axis and Allies Pieces

Here’s another pic in dimmer light, which is a better comparison to the before picture above.

The silver pops nicely. Before, in the same lighting situation, I couldn’t see most of the border lines at all.

I used the Edding 5300 silver acrylic paint marker with a 1-2 mm tip
The silver seems to really catch what little light there is in the room.

As the paint the marker ran low of paint it was harder and harder to control, so I reccomend just stopping and using a fresh paint marker if this happens. A few of the last lines I did are fatter than I would like because of this.
But the overal result is a huge improvement.

IMG_20230304_154631.jpg

@trenacker
I’ve been painting some pieces the last two weeks. I’m having trouble with Rustoleum Lemongrass for the UK. The paint doesn’t apply very well. I use Eden for USA, French blue for France, rustic orange for Japan, flat gray for Germany. Lemongrass is just a pain for whatever reason.

I’m using Adobe Photoshop CS6.  The textures that I made for the neutrals are partially “from scratch” and partially “stitched together” (and color corrected) from other areas of the map.

@John:

I don’t know what everyone else likes, but I like videos. For example, you showing everyone how to put these I 94 decals on or how you do those awesome dry brush techniques, you are always talking about, or the whole process of a painted piece, from the time you prime it to the finishing coat, including how to place the decals on.

Any of those would be cool videos! :-D

Good to know! I have never tried videos, as I don’t have the camera skills (or the camera, for that matter) to film close up like that. I have friends around who have the equipment though, so I might give it a shot.

@jwo1984:

Hey spitfire… I liked the layout of yor original painting tutorial… With stages photos befores and afters with descriptions under each photo and stage.  I would like too see some face washes you use on infantry men. And some washes you use for a variety of infantry moulds. Even a gallery too showcase some of your personal playing pieces would be cool!

I will definitely do a tutorial on washes! I’m planning on doing another in depth infantry tutorial, so that will feature the face washes you’re talking about.

@jwo1984:

hey guys, so I was searching some camo desert schemes for HBG’s Valentine medium tank and came across this one. � However looking at the sculps I knew it would be tough to paint these blue lines in because most of the tank is all track! so I cut out and shaped some track guard armour like the photo below just using some clear flexible plastic and glued in too the sides…making these two tanks mk II’s which look to have had the side armour as a pose to the Mk V that HBG has sculpted.

I’m sure whatever you do too it, it will turn out great. Can’t wait too see it painted. Good luck buddy! :-D

Regarding prices, here are some quotes that I got from two different Southern California print shops  (I had posted this also on the thread entitled Ambilzi & Grasshopper’s 1940 Global Map)

The first print shop provided the following estimates (note the $52 set up fee):

SET UP:  $52.05 ( digital color file set up, latex printer set up)

48" x 105" vinyl $142.63  print digital color 4/0 on white smooth vinyl (15oz)

48" x 105" canvas  $300.13  print digital color 4/0 on canvas

48" x 105" versa fabric  $273.88  print digital color 4/0 on versa fabric

53" x 116" vinyl  $174.63 print digital color 4/0 on white smooth vinyl (15oz)

53" x 116" canvas $368.13  print digital color 4/0 on canvas

53" x 116" versa fabric $335.88 please note: print cannot be any larger, printing on a 54" rolld

A second set of quotes from a different Southern California printing company for printing on vinyl (the type of material used for advertising banners):

48"x105" ,  white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $230.80

53"x116",    white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $258.78

56"x122.5",  white 64" Roland EcoSol Banner, solvent 6 color Roland 4sf  $277.42

(I might check on the AliBaba website to see what I can find for printing services in China.  Also, I’m checking on the possibility of printing on upholstery vinyl and marine vinyl).

@Darkshadow:

Thanks guys, I have copies of Europe and pacific 2nd ed and recently bought some of HBG’s fantastic sculpts but was wondering what to do with my 41 pieces, I guess for the most part simplest thing would be to spray them for the correct nation (though I doubt Russia will ever need 6 carriers).

Oh… I do believe I understand now. And yes, your best option is probably to spray them to match the correct nation (as best you can anyway). If you do not want the ones you cannot use, you could list them in the Marketplace section of the forum and see if anyone wants to buy or trade for them.

Pretty ingenious, definitely food for thought since it gives us options for future modifications. Nice job.