Easy Carrier upgrade with stickers…

Looks like Tumbling Dice 1/600 scale aircraft are a decent option to fill any aircraft holes. But they run a little small, more Classic fighter size than the current A&A fighters. And for fighters, cost competitive with HBG. Twin engined heavy fighters like the PE-2, and the Ki-45 are a good match to the OOB P-38, but smaller than the OOB Mosquito.

@CWO-Marc said in HISTORICAL DECALS for American Carriers.:

{snip}
CV-4, Ranger, was America’s first purpose-built carrier, and was twice as fast as Langley, but was about 10,000 tons smaller than the Yorktown class, and as I recall most or all of her WWII service was in the Atlantic/Mediterranean theatre, against two countries (Germany and Italy) with no operational fleet carriers in their navies.

Admiral King, the chief of the US Navy during World War II, wanted to refit the Ranger and send her to the Pacific. When his staff told him that the refit would cost just as much as a new-build Essex-class carrier, he changed his mind. The Ranger would be the only US carrier that was in commission on December 7th, 1941, to not face the Japanese Navy in World War II. Of course, not facing the Japanese Navy in no way prevented the Ranger from seeing action in World War II, just in the North African and European theaters.

-Midnight_Reaper

@Always-Wanderer

Thank you for providing this!

Matt H.

Thank you for the positive feedback! I forgot to say that in the previous post, and it’s very important that I do. It’s very encouraging and motivating to get good feedback, and we certainly appreciate it. The above mentioned four Essex class carriers are complete, a long with several other ships of the US Navy, so its time to update the thread. Just ships by FOlewnik in this post. More aircraft are almost done but I haven’t put magnets in them yet (so not really done), so no aircraft pictures this post.

We’ll start with the two “odd men out” of the HBG sculpt Baltimore Class Heavy Cruisers. Why “odd men out”? Because in the below picture we have on the left, the USS Unnamed Baltimore Class Cruiser Wearing Measure 31a, Design 9C, and on the right is the USS Columbus (CA 74), which wasn’t commissioned until June 8, 1945. The cruiser with the long name is wearing a design that was never used, but was taken from a period design found at https://www.wikiwand.com/en/World_War_II_US_Navy_dazzle_camouflage_measures_31,_32_and_33:_cruisers. The USS Columbus is wearing a Measure 12 Modified designed by FOlewnik to match the pieces we’ll be using for the US Atlantic fleet. These will get aircraft added, but at the time of the photographs the decals on the wings of the aircraft were drying.
DSC_0510a.jpg
DSC_0511a.jpg
DSC_0512a.jpg
Pattern_sheet,_MS-31a_9C_for_Baltimore_class.jpg

Next up are some metal destroyers from GHQ. Below on the left, the very brave USS Johnston (DD-557) painted in MS-3_/6D as it looked when it was “Sunk by Japanese Warships off Samar October 25 1944,” and next to it is USS Van Valkenburgh (DD-656) painted in camouflage Measure 31, Design 9d. All Wartime photos taken from Navsource.org, a great resource for US Navy history buffs.
DSC_0514a.jpg
DSC_0515a.jpg
DSC_0516a.jpg

Below, the real USS Johnston shortly before her final battle, and the official design sheet:
DSC_0516a0555715.jpg
Pattern_sheet,_MS-31-32-33_6D_for_Fletcher_class.jpg

A great wartime picture of the USS Van Valkenburgh, which is the same on both sides:
DSC_0516a0565603.jpg

Now on to these two. From GHQ, USS The Sullivans (DD-537) painted in Measure 1, and the HBG sculpt light cruiser USS Marblehead (CL-12) who always wore Measure 2 throughout the war. If I can get FOlewnik to put the Shamrock on the first stack of The Sullivans when he puts the scout aircraft on the Marblehead, as seen in the below wartime photograph, I’ll come back and edit the post.
DSC_0520a.jpg
DSC_0522a.jpg
DSC_0519a.jpg
DSC_0520a0553740.jpg
DSC_0520a0401208.jpg

The post previous to this post showed four Essex Class sculpts from HBG getting prepped and started with a base coat. Those are now completed and I had too much fun playing with them and the aircraft (that are complete so far) while I was taking photographs. I’m pretty sure I didn’t make any wooshing sea or aircraft noises or FOlewnik would have laughed at me. I was tempted though, and here’s why:
DSC_0524a.jpg
DSC_0525a.jpg
DSC_0526a.jpg
Above we have the first of the Long Hull Essex Class, USS Ticonderoga (CV-14) on the left looking as she did after her April 1945 refit from suffering a Kamikaze Attack on January 21, 1945, and USS Bunker Hill (CV-17) on the right. The Bunker Hill is wearing Measure 33, Design 6A, of which Navsource says, “Her port side camouflage pattern was the most intricate design applied to any carrier.” One glance can confirm that!
DSC_0526a021772.jpg

The final two Essex Class carriers are the USS Essex (CV-9) herself, and the USS Bennington (CV-20). The Essex is wearing a unique pattern, Measure 32v6, Design 10D, adapted from a destroyer pattern specifically for the long hulled Essex. The Bennington is painted in Measure 32, Design 17A.
DSC_0527a.jpg
DSC_0528a.jpg
DSC_0529a.jpg
DSC_0529aPattern_sheet,_MS_32a_17A_for_Essex_class.jpg
DSC_0529aUSS_Essex_(CV-9)_in_MS_32_6-10D_camouflage.jpg

Finally, some group pictures just for fun:
DSC_0531a.jpg
DSC_0532a.jpg
DSC_0533a.jpg
DSC_0534a.jpg
Thank you for checking out the post! If you liked it, please click the little heart. I’m trying to figure out why our post is only rated with a 2 when it seems it should be a bit higher if the other likes are any indication.

@siredblood:

@GeneralHandGrenade:

I couldn’t find any magnets that thin. I just redid mine yesterday and had to use thicker ones. Good job Sired.

I don’t know if they have Home Depot in Canada, but that’s where I got it, if not, you can find it here :

http://www.homedepot.com/p/MASTER-MAGNETICS-3-4-in-x-26-ft-Magnetic-Tape-with-Dispenser-96774/204752648?cm_mmc=Shopping%7cTHD%7cG%7c0%7cG-BASE-PLA-D25H-Hardware%7c&gclid=CN-u3In81tECFUi2wAodQuQIAA&gclsrc=aw.ds

It has bad reviews lol, but it works good, just don’t stick to anything. However the drop of super glue seems to work, as they have never fell off.

Thanks for the comment cyanight, all your magnetic mods are pretty amazing!

We do have Home Depot (all over the place here), but they don’t seem to carry Magnetic Tape.,… well, they do, but it’s this stuff : https://www.homedepot.ca/en/home/p.12-x-10-magnetic-tape.1000418120.html?autoSuggest=pip which wouldn’t work as it’s a LOT thicker.

I HAVE however seen that stuff at Micheals Arts and Crafts. You’re right, it doesn’t stick well (or at all) so superglue is a must.

Those are very impressive, sir.  Not just the details and kitbashing but the paint job and wash as well.

Richard,

@Maofator:

Looking good Mr Johnson!
––Yes,…VERY NICE!
Although I’ve told you in person I realize I’d overlooked giving you some well deserved public acclaim. Your "stickers"are a novel approach and look very crisp and clean. Let’s talk further on the project I’d discussed with you earlier. Again,…Wel Done!
Tall Paul

Hey Everyone,

Just joined the forum because I was looking for ideas on customizing my new G40.  It’s awesome to see all the information that you guys are posting.  I’m just learning how to navigate through this forum and I’m looking forward to be a part of the community. Sorry if this is the wrong section to say hello.