Cyanight's Customizations

Thank you for sending the map to my printer. I have been testing scenarios out with my A&A using my 1942 second edition. I just have been using sticky note paper to mark my Italian territories. I used the game pieces from my anniversary addition for the Italian pieces. I also added have tracks: cost is IPC 5. Attack 2, defend 2 as tanks cost 6 IPC in this version. Its nice to spend 5 IPC on an actual unit other than an AA gun. No artillery bonus on half track in this version
I also added the recruitment center from zombies.
Please see the chart below
MOBILIZATION ZONE
UNIT STATS COST MOVE ATTACK DEFENSE
LAND UNITS
INFANTRY 3 1 1 2
ARTILLERY 4 1 2 2
HALF TRACK 5 2 2 2
TANK 6 2 3 3
ANTIAIRCRAFT ARTILLERY 5 1 0 1
RECRUITMENT CENTER 10 0 0 0
INDUSTRIAL COMPLEX 15 0 0 0

Custom Ship Deck Decal Sets

Hello everybody. I wanted to announce that AxisandAlliesBoardGaming.com has released new decal sets specifically made for the Axis & Allies naval game pieces from the following game versions: Europe 1940, Pacific 1940, Spring 1942 & 1941 Anniversary Edition.

This is the DIY option for those who want the enjoyment and challenge of painting their own game pieces. Now you can finish them off with precision-cut waterslide decals to give your creations a professional look. Each individual ship deck decal has been pre-cut to ensure a perfect fit every time.

It is very difficult to get a clean edge on your ship decks using a paint brush by hand. One side of the ship might have straight lines but the other side might be noticeably wavy or you painted onto the superstructure by accident. You can pay others to painstakingly paint your ships but that can be very expensive for an entire fleet or game set. With these decals, there are no more worries about the final look and feel of your ships. Now it is easy to produce game pieces like a pro, and you can paint as many pieces as you want and every one will look great.

These are sold in fleet sets that include deck decals for all the naval game pieces for the selected country and game version. Some examples:

The Italian Europe 1940 set – 26 ships in all.
a0b62420-bbf2-436c-a412-dda83ecf66b2-image.png

The German 1941 Anniversary Edition set – 42 ships in all.
30f1e58e-010f-4601-8dec-38a9e9e69e09-image.png

The French Europe 1940 set – 18 ships in all.
7ef6e16a-e55e-4269-a772-16787441e7c5-image.png

The US 1941 Anniversary Edition set – 48 ships in all.
2f768989-caa2-41f1-a126-785688e40dbf-image.png
Check them out and more at www.axisandalliesboardgaming.com.

I could help with financing?

Dice would have either land or naval with a separate category of Air because that branch overlaps both

Symbols for land: ( green) 6 dice in set
Infantry x 1
Armour x1
Mech x1
Artillery x2
Blank x1

Symbols for Naval: ( blue) 6 dice in set

Battleship x1
Cruiser x1
Destroyer x1
Submarine x2
Blank x1

Symbols for Air: (white) 6 dice in set

Fighter x2
Fighter-Bomber x2
Strategic Bomber x 2

Thank you for the positive feedback! I forgot to say that in the previous post, and it’s very important that I do. It’s very encouraging and motivating to get good feedback, and we certainly appreciate it. The above mentioned four Essex class carriers are complete, a long with several other ships of the US Navy, so its time to update the thread. Just ships by FOlewnik in this post. More aircraft are almost done but I haven’t put magnets in them yet (so not really done), so no aircraft pictures this post.

We’ll start with the two “odd men out” of the HBG sculpt Baltimore Class Heavy Cruisers. Why “odd men out”? Because in the below picture we have on the left, the USS Unnamed Baltimore Class Cruiser Wearing Measure 31a, Design 9C, and on the right is the USS Columbus (CA 74), which wasn’t commissioned until June 8, 1945. The cruiser with the long name is wearing a design that was never used, but was taken from a period design found at https://www.wikiwand.com/en/World_War_II_US_Navy_dazzle_camouflage_measures_31,_32_and_33:_cruisers. The USS Columbus is wearing a Measure 12 Modified designed by FOlewnik to match the pieces we’ll be using for the US Atlantic fleet. These will get aircraft added, but at the time of the photographs the decals on the wings of the aircraft were drying.
DSC_0510a.jpg
DSC_0511a.jpg
DSC_0512a.jpg
Pattern_sheet,_MS-31a_9C_for_Baltimore_class.jpg

Next up are some metal destroyers from GHQ. Below on the left, the very brave USS Johnston (DD-557) painted in MS-3_/6D as it looked when it was “Sunk by Japanese Warships off Samar October 25 1944,” and next to it is USS Van Valkenburgh (DD-656) painted in camouflage Measure 31, Design 9d. All Wartime photos taken from Navsource.org, a great resource for US Navy history buffs.
DSC_0514a.jpg
DSC_0515a.jpg
DSC_0516a.jpg

Below, the real USS Johnston shortly before her final battle, and the official design sheet:
DSC_0516a0555715.jpg
Pattern_sheet,_MS-31-32-33_6D_for_Fletcher_class.jpg

A great wartime picture of the USS Van Valkenburgh, which is the same on both sides:
DSC_0516a0565603.jpg

Now on to these two. From GHQ, USS The Sullivans (DD-537) painted in Measure 1, and the HBG sculpt light cruiser USS Marblehead (CL-12) who always wore Measure 2 throughout the war. If I can get FOlewnik to put the Shamrock on the first stack of The Sullivans when he puts the scout aircraft on the Marblehead, as seen in the below wartime photograph, I’ll come back and edit the post.
DSC_0520a.jpg
DSC_0522a.jpg
DSC_0519a.jpg
DSC_0520a0553740.jpg
DSC_0520a0401208.jpg

The post previous to this post showed four Essex Class sculpts from HBG getting prepped and started with a base coat. Those are now completed and I had too much fun playing with them and the aircraft (that are complete so far) while I was taking photographs. I’m pretty sure I didn’t make any wooshing sea or aircraft noises or FOlewnik would have laughed at me. I was tempted though, and here’s why:
DSC_0524a.jpg
DSC_0525a.jpg
DSC_0526a.jpg
Above we have the first of the Long Hull Essex Class, USS Ticonderoga (CV-14) on the left looking as she did after her April 1945 refit from suffering a Kamikaze Attack on January 21, 1945, and USS Bunker Hill (CV-17) on the right. The Bunker Hill is wearing Measure 33, Design 6A, of which Navsource says, “Her port side camouflage pattern was the most intricate design applied to any carrier.” One glance can confirm that!
DSC_0526a021772.jpg

The final two Essex Class carriers are the USS Essex (CV-9) herself, and the USS Bennington (CV-20). The Essex is wearing a unique pattern, Measure 32v6, Design 10D, adapted from a destroyer pattern specifically for the long hulled Essex. The Bennington is painted in Measure 32, Design 17A.
DSC_0527a.jpg
DSC_0528a.jpg
DSC_0529a.jpg
DSC_0529aPattern_sheet,_MS_32a_17A_for_Essex_class.jpg
DSC_0529aUSS_Essex_(CV-9)_in_MS_32_6-10D_camouflage.jpg

Finally, some group pictures just for fun:
DSC_0531a.jpg
DSC_0532a.jpg
DSC_0533a.jpg
DSC_0534a.jpg
Thank you for checking out the post! If you liked it, please click the little heart. I’m trying to figure out why our post is only rated with a 2 when it seems it should be a bit higher if the other likes are any indication.

Really nice models that stand out well with a rather simple paint scheme. Well done!

@Young:

Those look awesome wolf, I would be very interested in getting some of those.

I know you’re in Canada, so not sure how/what your limits are to shopping or ordering online, but here’s a link to the organizers from Home Depot online… if nothing else, you get “the official” name.

I use these for the nation trays
https://www.homedepot.com/p/Husky-7-in-6-Compartment-Small-Parts-Organizer-83039N13/204536852

I use this for the accessories
https://www.homedepot.com/p/Husky-6-in-6-Compartment-Storage-Bin-Small-Parts-Organizer-Clear-and-Black-THD2015-03/301959981

Of course, use them as you will…

As for my flags, I just used Vistaprint and made some small rectangular product labels and you upload your pictures into them… perfect for national bin flags… I made sure to use era-appropriate flags (like the 48-Star American Flag)

https://www.vistaprint.com/marketing-materials/labels-stickers/rectangular-product-labels?couponAutoload=1&GP=04%2F08%2F2018+19%3A55%3A49&GPS=4958753423&GNF=1

Thanks everyone for your replies, I finished last night. Really happy with how these turned out.

factories.jpg

Thanks Spitfire38, for your kind words and encouragement, as well. Yes, looking forward to meeting you someday as well, whether painting or playing.

Thanks buddy! :-D

Cheers!

John